Description: SH Scientific offers quality and budget-saving 1050 ℃ to 1800 ℃ muffle furnaces for material analysis, treatment and innovation in the area of water, soil, ceramic, metal, alloy, plastic and battery material. SH Scientific laboratory benchtop muffle furnace MG series goes up to max 1200 degrees Celsius (℃) and the ideal operating temperature is 1050 degrees Celsius (℃) and below.If your testing is carried out under this temperature in any case, do not overpay for standard design. This universally used muffle furnace is designed for your budget-saving.Our MG series are the most affordable quality muffle furnace in the market. Save your budget. Our muffle furnace takes less than 40min to reach 800℃.SH Scientific muffle furnaces are ideal for wide range of application including combustion, ash analysis, calcination, oxidation, sintering, hardening and tempering, melting, thermocouple calibration, annealing, stress relieving and etc. 3L chamber (L130xD250xH90mm)Laboratory benchtop muffle furnace with swing doorRecommended ideal running temperature is below 1000℃Heating from 4 sides and excellent temperature uniformity (+/-2.5%)Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymerDouble housing and low surface temperature (29~30℃ at 800℃)Ceramic fiber materials which are not classified as carcinogenicLight weight. 34kgPrompt heat up and good maintainingSSR operation and PID control provides low noise operation and precise temp control (+/-1℃) ModelSH-FU-3MGMax temperature1200℃Continuous running temperature1050℃ and belowChamber volume3litersControllerDigital PID controllerSensorK typeHeater1.4kWHeating elementKANTAL A-1InsulationCeramicPower supply110V, 50/60Hz, 1p, 12A220V, 50/60Hz, 1p, 6ANet weight34kgChamber size130x250x90mmExternal size370x510x570mmHERE ARE OUR PROUD SUPPLY REFERENCE OF SH SCIENTIFIC FURNACE FOR CUSTOMERS AND INDUSTRIES.a. Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.b. Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.c. Material technology providers who develop polymer composites and graphene materials.d. Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.e. Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.f. Material innovation companies who do sintering in vacuum or in inert gases.g. Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.h. Analytical research labs who perform various material testing with thermal treatment.i. Medical implants manufacturers who anneal alloy powders.j. Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.k. Applied science engineers who process solid oxide fuel cells (SOFC).l. Environmental and chemical researchers who need combustion of materials.m. Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.n. Metallic parts manufacturers who need vacuum brazing and heat treating for steel.o. Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.p. Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.q. Engineering companies who do curing and sintering solutions in porous ceramic tubes.r. Civil engineers who need soil combustion.s. University labs who anneal Si wafer in vacuum condition.t. Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.u. Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).v. Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnacew. Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.
Price: 2180 USD
Location: Compton, California
End Time: 2025-01-06T01:09:58.000Z
Shipping Cost: 350 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Model: SH-FU-3MG
Modified Item: No
MPN: SH-FU-3MG
Country/Region of Manufacture: Korea, Republic of
Custom Bundle: No
Brand: SH Scientific
Intended Use/Discipline: Ashing and sintering, Muffle furnace, Powder Metallurgy, Metal injection molding, Ceramic injection molding, Medical implants manufacturing, Annealing and combustion, 3D printing and densification, Metal softening, Fluoride glass melting, Dental Laboratory
Furnace/Oven Type: Lab Furnace
