KRX 1000 Flip Up Seat Kit, With Quick Pin Removal (For 14mm Head Bolts)

Description: FREE SHIPPING! MADE IN THE USA! __________________________________________________________________________________________________________PLEASE READ! 7/14/2021: Kawasaki has made a seat mounting bolt change. The exact production date change from Kawasaki is unknown at this time. We do know any car built after 4/21 needs to be checked before purchase of any seat kit. PLEASE check your seat mounting bolts before ordering this kit. If your seats take a 14mm socket or wrench to remove them, then this is your kit. If your seats take a 12mm socket or wrench to remove them then, please go to our EBAY webstore and search 12mm for the correct kit for you. Please note we do not do returns due to picking the incorrect kit!__________________________________________________________________________________________________________ In our opinion the Kawasaki Teryx KRX 1000 seats are one of the biggest FAILS of any current utv. Why would Kawasaki not build to the same standards as other brands? Its one thing they overlooked and it needs a remedy. Do these scenarios sound familiar? A. There is a ton of room behind the seats for storage, but you can't get to it? B. Unlike other utv's on the market, the seats have no way to be quickly removed without pulling all the bolts. Just to wash behind them is a nightmare!C. The slider system is a poor design that should have had a crossbar between the left and right seat rails so they dont "bind" going forward and back. Well after months of dealing with these issues we have come up with a low cost, light weight cure. Full Access UTV seat brackets include many advantages: - Lower cost and lighter weight then anything on the market. - The seat brackets allow you to flip the seats forward to gain access to behind the seat storage. - Remove two locking pins and the seats can be removed in seconds. - Rear locators hold the rear of the seat firmly in place not allowing it to move side to side while riding. - A crossover brace is included that attached to the left and right seat rails to help minimize cross binding while trying to slide the seats forward or back. - The brackets add only a 1/2" to the overall seat height. 1.25" in the front. - 5/8" of recline is built into the seat brackets. However, the recline can be changed to zero, or it can be modified to increase it even more. - Install time is less than 20 minutes! INCLUDES:8- upper and lower seat mounting brackets.2- seat cross supports.4- Rear locators.4- quick release pins.1- 5mm allen wrench.1- 6mm allen wrench. All grade 8/10.9 metric hardware needed to install. NOTES: Works with click 6 harnesses. WHY and instructional videos below: Full Access UTV Kawasaki KRX 1000 Flip Forward Quick Release Seat MountsVideo will open in a new windowUsing the eBay App? Paste link into a browser window:

Price: 244.99 USD

Location: Reno, Nevada

End Time: 2024-11-18T20:18:20.000Z

Shipping Cost: 0 USD