JVCC REF-7 Engineering Grade Reflective Tape: 1/2 in. x 30 ft. (Silver-White)

Description: Product HighlightsJVCC REF-7 Engineering Grade Reflective Tape is used for safety applications as well as entertainment industry use as spike tape or "daytime" glow tape. Reflective Tape is primarily designed for permanent and temporary traffic signage and features an enclosed lens retroreflective urethane film coated with a permanent acrylic adhesive.Application surface should be flat (not curved or tubular). Also, it is not designed to adhere to unpainted stainless steel surfaces. JVCC REF-7 may be screen printed, guillotine cut, die-cut, or thermal kiss-cut. The adhesive has a dwell time of 24 hours but reaches 75% of its adhesiveness after 15 minutes. Photos of REF-7 are taken with a flash camera in order to show the reflectivity of the tape; the colors of the tape will be much darker if a high-intensity light source (like the flash from a camera or car headlights) are not being directed at the tape. The colors in order of reflectivity are: white, yellow, orange, green, red, blue (white is around 15 times more reflective than blue).Certifications: LS-300C (Reflectivty 1 Class 1), FP-85 (Type II), ASTM D4956-94 (Type 1). Carrier/Backing: enclosed lens retroreflective urethane film. Adhesive: acrylic. Adhesion: 50 ounces per inch (to stainless steel test panel).Thickness: 12.8 mils (carrier, adhesive, liner) 6 mils (carrier, adhesive) 6.8 mils (liner) . Service/Operating Temperature: -40F to 180F. Application Temperature: 50F (minimum). JVCC REF-7 Engineering Grade Reflective Tape is used for safety applications as well as entertainment industry use as spike tape or "daytime" glow tape. Reflective Tape is primarily designed for permanent and temporary traffic signage and features an enclosed lens retroreflective urethane film coated with a permanent acrylic adhesive. Application surface should be flat (not curved or tubular). Also it is not designed to adhere to unpainted stainless steel surfaces. JVCC REF-7 may be screen printed, guillotine cut, die-cut, or thermal kiss-cut. The adhesive has a dwell time of 24 hours, but reaches 75% of its adhesiveness after 15 minutes. Comes on a 3 inch diameter neutral paper core and has a paper release liner. Meets or exceeds requirements of federal specification LS-300C, FP-85, and ASTM D4956-94. Has a 7 year durability. Photos of REF-7 are taken with a flash camera in order to show the reflectivity of the tape; the colors of the tape will be much darker if a high intensity light source (like the flash from a camera or car headlights) are not being directed at the tape. The colors in order of reflectivity are: white, yellow, orange, green, red, blue (white is around 15 times more reflective than blue). NOTES: Sizes shipped will typically be the tape industry standard metric-cut sizes, i.e. 24mm for each 1 inch of nominal tape width ordered (rolls are approximately 5% narrower than the nominal size). This product's actual size is 12mm x 9m. This tape is typically cut to width from log rolls so most sizes ship on non-branded plain white cores. As with any adhesive tape product it is always the user's responsibility to determine that the product is suitable for their intended use; e.g. if you want to remove a product cleanly from a specific type of substrate please test on an inconspicuous area first. Technical Information- Core: 3 inch diameter - Backing/Carrier: enclosed lens retroreflective urethane film - Adhesive: acrylic - Release Liner: 94# paper - Standards Met: LS-300C (Reflectivty 1 Class 1), FP-85 (Type II), ASTM D4956-94 (Type 1) - Thickness: 12.8 mils (carrier, adhesive, liner) 6 mils (carrier, adhesive) 6.8 mils (liner) - Adhesion: 50 ounces per inch (to stainless steel test panel) - Application Temperature: 50F (minimum) - Service/Operating Temperature: -40F to 180F

Price: 6.59 USD

Location: Fairless Hills, Pennsylvania

End Time: 2024-10-14T05:46:48.000Z

Shipping Cost: N/A USD