JL Audio RD900/5 RD Series Class D 5 Channel Stereo Subwoofer Amplifier 900w RMS

Description: Welcome to CEN Order by 2PM weekdays for Same Day Dispatch Car Home Dash Cams Tech Photography Accessories JL Audio RD900/5 RD Series Class D 5 Channel Stereo Subwoofer Amplifier 900w RMS RD900/55 Ch. Class D System Amplifier, 900 W Description 5-Channel Class D System Amplifier, 70 W x 4 @ 4 Ω + 500 W x 1 @ 2 Ω - 14.4V Crafted as an all-in-one, total system solution, the RD900/5 is engineered to power a complete audio system consisting of a subwoofer + four satellite system with 900 watts of high-performance sound. Equipped with our exclusive NexD™ switching technology, this complete power package efficiently generates a potent 70 watts of crystal-clear audio into 4 ohms, plus a robust 500 watts for a subwoofer system, all from a single compact chassis. Each pair of main channels is also fully bridgeable, stoutly producing 200 watts of full-range audio bliss (into 4 ohms), creating an ultra-powerful 3-channel amplifier. Conveniently located on top of the RD900/5, you’ll find a complement of studio-grade signal processing features, all hidden beneath a removable protective cover. Each pair of main channels is equipped with a 12 dB / octave high-pass filter, with a dedicated low-pass filter for its subwoofer channel. All three crossovers offer continuously variable frequency selection from 50-500 Hz, for precise filtering. Dual-range, differential-balanced inputs are also onboard, capable of accepting most input voltage levels, plus automatic turn-on capability (via signal sensing or DC-offset sensing) for maximum versatility. LED clipping indicators are also standard equipment for each channel section. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity settings, quickly and accurately, with no special equipment needed. The RD900/5 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. With the addition of an RBC-1 remote level control (sold separately), you can conveniently control the subwoofer’s output remotely from the driver’s seat.NexD™ Switching Technology NexD™ amplifier technologies produce exceptional audio quality, unsurpassed total efficiency and high power from very compact amplifier designs. Beginning with the original 'Slash' subwoofer amplifiers, JL Audio has been at the forefront of Class D amplifier design. Our NexD™ switching technology stems from our Class D expertise to deliver outstanding fidelity and efficiency, leading to compact amplifiers that deliver high power and exceptional value. Let's get a little nerdy... A traditional PWM switching amp design uses a fixed switching frequency and varies the pulse width based solely on the audio input signal to the pulse modulator. This basic approach assumes some ideal conditions, like a rock-steady power supply, that do not necessarily occur in a real, in-car installation. Power supply sag with signal causes distortion at all power levels with these designs, even well below clipping. The cure for this is feedback (a corrective signal sent back to the input side), but this becomes impractical as the audio frequency increases, making it a good solution for band-limited (subwoofer) amps, but not for full-range amplifiers. Taking the above into account when designing the NexD™ subwoofer amplifiers, we have taken the simple fixed PWM approach and enhanced it with a very high switching frequency: 240 kHz, which is about 4x higher than most Class D subwoofer amplifiers. This pushes the amplifier's bandwidth to at least 500 Hz with minimal distortion and improves efficiency, while keeping typically bulky circuity more compact. Your subwoofers will reward you with tight, rock-solid bass performance. For the full-range NexD™ amplifiers and channels we applied a variable, ultra-high speed version of the NexD™ technology (switching at well over 400 kHz). In these designs, a self-oscillating modulator with "feed-forward" sends information about the instantaneous power supply voltage to the modulator, combining this with the input signal to cancel out any distortion due to supply voltage fluctuation. This reduces distortion prior to applying feedback, simplifying the overall feedback loop design. The bottom line is simply great audio: clean, powerful and reliable.Differential-Balanced Inputs JL Audio’s Differential-Balanced Inputs are engineered to combat induced cable noise, which is a common problem in car and marine audio installations. This technology allows for the use of conventional RCA cables, while delivering many of the benefits of a true balanced connection and accepting a wide range of input signal levels. Today’s vehicles are equipped with sophisticated electronics capable of generating noise and interference that can intrude into the audio path, ruining the listening experience. Most audio equipment uses single-ended, ground-referenced RCA jacks to receive audio signals. This means that the RCA shield is connected directly to signal ground. This is a simple, cost effective input design that works well for short runs in noise free environments. In noisier environments, this method cannot reject the common mode noise that could be on both RCA conductors (shield and center conductor). By having more than one chassis-grounded RCA shield on a device, single-ended input designs are also more susceptible to ground loops. If noise is present on both conductors while the shield is connected to ground, the input amplifier will amplify the noise relative to the grounded RCA shield. When there are multiple RCA connections or any other conductors subjected to a magnetic field, this will cause a difference in potential across the RCA loop to be amplified at the grounded RCA as noise (a classic ground loop). JL Audio’s Differential-Balanced Input circuits measure the center pin of the RCA connection relative to the RCA shield, even when the shield is not connected to ground, and even when the voltages at both conductors are moving relative to ground. Because both the center conductor and the shield see high impedance to ground at the input, a ground loop cannot be formed, as there is no current flow to induce a voltage as noise. This works equally well with differential-balanced, or unbalanced signal sources, making this input architecture compatible with all standard car and marine audio equipment, using standard, unshielded, twisted-pair RCA cables. No special cables are required, unlike the fully balanced connections used in professional audio. Another benefit of the Differential-Balanced Input design is that it easily accepts low-level and high-level signals from a variety of factory head unit outputs and amplifiers, including single ended “ground referenced” sources, as well as Balanced or Unbalanced “Bridged or BTL” sources. This eliminates the need for Line Output Converters (LOCs) in most installation scenarios. The obvious question is: “Why don’t all car audio amplifiers use Differential-Balanced Inputs?” The answer is simple: it costs more. Executing a proper differential-balanced input section requires more components and better quality components than a basic single-ended design, so you generally won’t find them on less expensive amplifiers. Specifications Rated Continuous (RMS) Power @ 14.4 VMain Channels @ 4 Ω 70 W RMS x 4Main Channels @ 2 Ω 100 W RMS x 4Main Channels - Bridged @ 4Ω 200 W RMS x 2Subwoofer Channel @ 4 Ω 225 W RMS x 1Subwoofer Channel @ 3 Ω 325 W RMS x 1Subwoofer Channel @ 2 Ω 500 W RMS x 1Subwoofer Channel @ 1.5 Ω N/ARated Continuous (RMS) Power @ 12.5 VMain Channels @ 4 Ω 60 W RMS x 4Main Channels @ 2 Ω 90 W RMS x 4Main Channels - Bridged @ 4Ω 180 W RMS x 2Subwoofer Channel @ 4 Ω 200 W RMS x 1Subwoofer Channel @ 3 Ω 250 W RMS x 1Subwoofer Channel @ 2 Ω 350 W RMS x 1Subwoofer Channel @ 1.5 Ω N/AGeneral SpecificationsFrequency Response (Main Channels) 12 Hz - 22 kHz (+0, -1dB)Frequency Response (Subwoofer Channel) 10 Hz - 500 Hz (+0, -1dB)S/N Ratio, referred to highest rated power (Main Channels) >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)Damping Factor @ 4 Ω >150 / 50 HzDamping Factor @ 2 Ω >75 / 50 HzTHD+N @ Rated Power (Main Channels) <1% @ 2 Ω per Ch.THD+N @ Rated Power (Subwoofer Channels) <1% @ 2 Ω per Ch.Input Voltage Range @ RCA Inputs Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)Min.Copper Power / Ground Wire Gauge 4 AWG wireFuse Rating 80 A (AFS, AGU or MaxiFuse™)Filter Mode(s): Channels 1 & 2 (front) High-Pass onlyFilter Slope(s): Channels 1 & 2 (front) 12 dB/octaveFilter Frequency Range: Channels 1 & 2 (front) 50 Hz - 500 HzFilter Mode(s): Channels 3 & 4 (rear) High-Pass onlyFilter Slope(s): Channels 3 & 4 (rear) 12 dB/octaveFilter Frequency Range: Channels 3 & 4 50 Hz - 500 HzFilter Mode(s): Subwoofer Channel Low-Pass onlyFilter Slope(s): Subwoofer Channel 12 dB/octaveFilter Frequency Range: Subwoofer Channel 50 Hz - 500 HzDetented, Calibrated Filter Freq. Potentiometers NoFilter Defeat Function NoInfrasonic Filter: Subwoofer Channel NoRemote Level Control Optional (RBC-1)Remote Level Modes Sub Ch.Channel Input Mode Switch Yes (2/4/6 ch.)Pass-Through Preamp Output NoSource Channel Selection for PreOuts N/AHeight (H) 2.13 in / 54 mmWidth (W) 14.66 in / 372 mmDepth (D) 6.96 in / 177 mmNet Weight 6.15 lb / 2.79 kg What's Included 5-Channel amplifier2.5mm Allen wrenchSelf-adhesive JL Audio badgeOwner's manual Delivery & Payment Privacy Policy Returns & Refunds Terms & Conditions © CEN UK LTD

Price: 579 GBP

Location: Nottingham

End Time: 2024-09-16T14:05:33.000Z

Shipping Cost: 69.36 GBP