JDSU ONX-580 One Expert Bonded DSL Tester w/ ONX-BDCM-DSL-BONDED Module ONX 580

Description: The Following Items Are Included: JDSU ONX-580 OneExpert DSL Tester Mainframe (BC# 43020-L/T*) Installed Options: Bluetooth Broadcom Speed Service DSL Bonded DSL Helper G. Fast 212MHz G. Fast Sckipio HPNA Mobile Ookla Speedtest Resistive Fault Locator SmartAccess Anywhere SmartID MoCA Transmission Impairments VoIP JDSU OneExpert ONX-BDCM-DSL-BONDED Module (BC# 43021-L/T*) (2) Ethernet Cables Test Leads Set AC Adapter/Charger Power Cord User Manual On CD-ROM Carrying Case (G) BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS! JDSU OneExpert DSL Tester Mainframe w/JDSU OneExpert ONX-BDCM-DSL-BONDED ModuleInstalled Options:- Bluetooth- Broadcom Speed Service- DSL Bonded- DSL Helper- G. Fast 212MHz- G. Fast Sckipio- HPNA- Mobile- Ookla Speedtest- Resistive Fault Locator- SmartAccess Anywhere- SmartID MoCA- Transmission Impairments- VoIPIncludes Carrying Case & Accessories As Listed Above! Working Condition: ExcellentCondition: RefurbishedWarranty: 1 YEAR WARRANTY JDSU OneExpert DSL Modular Test Platform ONX-BDCM-DSL-BONDEDConsistently achieve high-performance results when deploying fast broadband service to the home.OneExpert DSL helps field technicians fix problems right—the first time. A multitouch, user-friendly interface and OneCheck™ automated tests ease complex tasks with clear pass/fail results. And, its future-proof modules ensure years of use supporting access and home networks.Open DesignWith the advent of cloud-based applications, touch screen interfaces, and always-on, always-connected smartphones and tablets, instrument users have high expectations not only for usability, but also for seamless integration between their devices and the back office. OneExpert design takes all this into consideration and provides a test platform that helps technicians perform more efficiently and fix problems faster. It lets service providers invest in a long-term, open platform.ADSL2+ / VDSL2A common DSL sync test is performed at every dispatch because it is essential in helping field technicians understand DSL link quality (bandwidth rates, margins, errors, and likelihood for errors). This same test also helps to determine whether issues are coming from the equipment (CPE or DSLAM ports) or from the profile settings. OneExpert DSL supports ADSL/2/2+ Annex A and VDSL2 on singleline (up to 30a) and 2-pair bonded ports up to profile 17a. It supports vectoring on both single-line and bonded VDSL connections up to profile 17a along with DSL physical layer retransmission (DSL RTX/G.INP). It is easy to use and shows most critical results on a single DSL summary screen page.Single Test-Lead ConnectionWhen connecting copper test leads, technicians will try to reduce the expense of multiple test cables as well the incidence of errors resulting from using the wrong lead. It is critical to get a proper connection with a good ground, or risk rendering meaningless test results. However, swapping between DSL testing and copper testing during troubleshooting adds time and risks losing test-lead connection quality. OneExpert DSL lets technicians focus on test leads once, regardless of the number of DSL and copper tests that follow, saving time and, more importantly, avoiding misleading or incorrect results.IP Data — Web and Speed TestingInternet subscribers demand reliable connectivity and new applications require higher data throughput and network-delay time performance. DSL error protection using interleave delay and error recovery mechanisms, like those for IP video, counteract timesensitive data throughput using TCP/IP with acknowledgment and retransmission. The OneExpert DSL tester allows technicians to quickly test internet connectivity using the built-in web browser. It tests the data rates provided by VDSL vectoring with FTP/HTTP throughput as key reference tests for TCP/IP applications. Mature tests like IP ping delay are still necessary, especially for real–time applications, such as online gaming.OneCheck CopperIt is critical to test the copper prior to turning up DSL. What may have worked for POTS or lower-speed DSL may not work for VDSL or as the plant degrades. OneExpert DSL's OneCheck Copper function simplifies copper testing for field technicians with repeatable pass/fail results.TDR OneExpert DSL TDR test functionality is a powerful tool for identifying cable faults that can impair broadband service. It addresses TDR instrument operation for simplicity and accuracy—not one or the other, as with most TDRs—avoiding incorrect settings and false TDR readings. The automated SmartGain TDR mode’s patented time varying gain (TVG) and adaptive pulse width technologies precisely locate faults in access copper loops and inside home networks.Copper ImpairmentsA pristine copper plant guarantees error free service and high data rates. With OneExpert DSL, technicians can qualify the severity of copper impairments and locate copper faults.POTS DialerOneExpert DSL reduces the number of test tools a technician needs to carry by providing an integrated butt set. Technicians can use the POTS dialer to verify a line’s continuity to the exchange and that it works without conflicting with the customer’s broadband equipment due to an eventual missing or defective POTS splitter.Wiring ToolsWhere available, Ethernet cabling is typically preferred for home networks because it delivers optimal data rates and quality of service. OneExpert DSL wiring tools allow for Ethernet CAT5/6/7 or phonewiring CAT3 testing. Technicians can quickly set up a home network using the Wire Mapping Smart Remote and resistive IDs as remote probes. Further, OneExpert DSL supports Hub Flash, port discovery and a ping tool against multiple targets including gateway, DNS and target host/IP addresses.WiFi The use of wireless devices and networks is becoming a common part of every household. With the OneExpert DSL WiFi Scan, technicians are equipped with wireless 802.11b/g/n (2.4 GHz) testing capability to show the signal strength, secure set identification (SSID), configured channel, security, MAC address, and 802.11 protocol at the test location of each wireless 802.11b/g/n network in the area. It also indicates whether a network is secure or vulnerable to security threats.Coax Problematic coax cable accounts for most repeat calls as well as video, voice, data, and multiroom DVR installation problems. Most home coax has never even been tested at the frequency ranges that support these services so problems become more apparent after service installation.The powerful OneExpert DSL in conjunction with the optional JDSU SmartID coax probes can verify in-home coax (quality and topology) and service distribution to quickly display and certify subscriber coax topology. It immediately identifies and locates physical-layer impairments that affect both triple-play and multiroom DVR services saving valuable troubleshooting time and eliminating the need for repeatedly segmenting the network, making changes, and then retesting. Technicians use the information the device provides to determine whether they can quickly fix the drop, replace it with a new one, or use an alternative means to supply service to the location.After completing physical-layer testing with SmartIDs, technicians can use the HPNA test to verify the coax network with CPE.Features: Easy-to-use SmartGain™ TDR ensures every technician can locate copper faults OneCheck™ automates field tests and simplifies copper results Reduce OpEx by turning all results (including external) into smart data to proactively manage network and workgroup performance StrataSync™ cloud-enabled asset and test data management reduces administrative support time with an at-a-glance interface Modular platform scales for new WiFi, fiber, and VDSL technologies Specifications: DSL Modem Test Interface Replaceable test module; ADSL2+/VDSL2, test access over copper test leads (tip A, ring B leads for single channel; T/A, R/B, T1/A1, R1/B1 for bonding) or 8-pin modular (RJ45 type) with pin assignments 4 and 5 for DSL single pair and 3, 4, 5, 6 for DSL bonding Modem Chipset and Version ONX-BDCM-DSL-BONDED Chipset: Broadcom 63168Configuration: OneExpert DSL Broadcom 63168 (Bonded) Test Module VDSL Standard Compliance Standard compliance as supported by the Broadcom 63168 chipset ITU-T G.993.2 — VDSL2ITU-T-G.998.1 — ATM bonding for module ONX-BDCM-DSL-BONDED ITU-T-G.998.2 — PTM bonding for module ONX-BDCM-DSL-BONDED ITU-T-G.993.5 — Self-FEXT cancellation (vectoring) ITU-T-G.998.4 — Improved impulse noise protection for DSL transceiversSingle-pair profiles: 8a/8b/8c/8d, 12a/12b, 17a, 30a for module ONX-BDCM-DSL-BONDED Dual-pair profiles: 8a/8b/8c/8d, 12a/12b, 17a for module ONX-BDCM-DSL-BONDEDVectoring profiles single-pair: 8a/8b/8c/8d, 12a/12b, 17aVectoring profiles dual-pair: 8a/8b/8c/8d, 12a/12b, 17a for module ONX-BDCM-DSL-BONDEDBand plan 997 and 998, U0 bandITU G.993.2 Annex Y vector-friendly mode ADSL Standard Compliance Standard compliance as supported by the Broadcom 63168 chipset ITU-T G.992.1 Annex A, (ADSL)ITU-T G.992.3 Annex A, L (ADSL2)ITU-T G.992.5 Annex A, M (ADSL2+)ITU-T-G.998.1 ATM bonding for module ONX-BDCM-DSL-BONDEDITU-T-G.998.2 PTM bonding for module ONX-BDCM-DSL-BONDEDANSI T1.413-1998, Issue 2 for module ONX-BDCM-DSL-BONDED ITU-T G.992.5 INP Amendment 3 General Settings and Features General Settings & Features Auto sync DSL technology modes ADSL, VDSL, auto PTM mode for ADSL2+ and VDSL2 ATM mode for ADSL2+ and VDSL Auto, ATM, PTM modes configurable Vectoring for VDSL2 Bonded vectoring support for VDSL2 for module ONX-BDCM-DSL-BONDED Vectoring, vector-friendly, vectoring off modes configurable DSL RTX (G.INP) configurable for upstream/downstream PhyR configurable for upstream/downstream Seamless rate adaption (SRA) on/off Bitswapping on/off Configurable V.43 carrier set 24 k interleaving depth on/of Modem Status and General Information Modem Status and General Information Modem state — synchronization status Training time Synchronization time ADSL mode, VDSL profile Transport ATM/PTM/auto Single-pair or bonding status Vectoring status information Estimated loop length Download rate Modem Summary Results Modem Summary Results Actual rate per pair Maximum attainable bit rate per pair Group actual rate for DSL bonding for module ONX-BDCM-DSL-BONDED Group maximum attainable bit rate for DSL bonding for module ONX-BDCM-DSL-BONDED Line capacity per pair SNR margin CRC errors and FEC errors RTX-UC LATN (line attenuation) SATN (signal attenuation) Graphical Results Graphical Results Signal-to-noise ratio per tone (SNR) Bits per tone (BPT) Quiet-line noise per tone (QLN) Hlog Two traces comparable DSL Errors DSL Errors Forward error correction (FEC) Forward error correction errors per minute (FEC/min) Cyclic redundancy check errors per minute (CRC) Cyclic redundancy check (CRC/min) Errored seconds (ES) Severely errored seconds (SES) Unavailable seconds (UAS) Loss-of-frame alarm seconds (LOF) Loss-of-signal alarm seconds (LOS) Loss-of-margin alarm seconds (LOM) DSL RTX (G.INP) DSL RTX (G.INP) Retransmitted DTUs (RTX-TX) Corrected DTUs (RTX-C) Uncorrected DTUs (RTX-UC) DSL Signal DSL Signal Sync count Time in synchronization state (uptime) 1 MHz ATN Vectoring status Interleaving status (path) Interleave delay Actual INP Signal attenuation (SATN) Line attenuation (LATN) TX power Per Band VDSL2 Statistics Per Band VDSL2 Statistics Loop attenuation (LATN) Signal attenuation (SATN) SNR margin Tx power DSL Identity DSL Identity Hardware type (chipset) Hardware revision (chipset revision) Vendor code Vendor revision Vendor software revision Vendor PHY revision 10/100/1000 Ethernet TE Test Interface 10/100/1000 Ethernet, RJ452 ports Test Results Link status, speed, duplex Network Test Interface ADSL2+/VDSL2 modem Ethernet 10/100/1000 (ports 1 and 2; non-blocking switching between ports) Network Types DSL terminate DSL through-bridge Ethernet terminate Data Mode IPoE, PPPoE, multi-VLAN, data of IP Mode IPv4, IPv6, IPv4/IPv6 dual stack MAC Setting Factory default, user-defined PPP/IP Connectivity BRAS: PAP/CHAP, IPCP RFCs 2516, 1483, 2684 VLAN Setting VLAN Setting Tag on/off VLAN interface count 1 to 6 ID selection 0-4095 Priority selection 0-7 IP Setup and Status IP Setup and Status WAN/LAN status Gateway/DNS Static or DHCP DHCP user class DHCP vendor class IP release/renew DNS support WAN and LAN IPV6 mode manual, stateless, DHCPv6 stateful DHCPv6 option IA_PD, IA_NA IPv6 global address Local address mode: manual, automatic Local IPv6 address Subnet prefix length IPv6 gateway DNS server Network Results Network Results Network status, IP address, net mask, gateway, DNS, MAC address Packet statistics rate, bytes, frames, errors, drops, collisions Skew and polarity per pair IP Data Test Interface ADSL2+/VDSL2, RJ45 and copper test leads Ethernet 10/100/1000, RJ45 IP Ping IP ping mode: IPv4, IPv6 Echoes sent/received, ping delay (cur/average/max/min) Lost count/percentage, packet size Supports IP address or DNS name destination File Transfer Throughput Test — Speedtest Transfer rate, bytes transferred, transfer status Transfer protocols FTP, HTTP Transfer direction download, upload HTTP authentication type none, basic, digist Concurrent download disabled, 1, 2, 3 Auto repeat disabled, enabled Web Browser Web connectivity through browser Wiring Tools Test Interface RJ45 and RJ11 (Wire Mapping) Tests Wire mapping with Wire Mapping Smart RemoteLocate cable runs with resistive IDs Hub flash Port discovery Ping tool Wire Mapping Results Pin assignment mapping Loop length per pair Opens Shorts Resistive ID Results Label ID number Pin pairs Resistance value Auto-detect interface RJ11 or RJ45 Hub Flash Results Remote Ethernet port flash for 10/100/1000 Mbps Ethernet ports Port Discovery Results Port capability, duplex, established link, skew and polarity per pair Ping Tool Results Ping reply and delay to Gateway, DNS, Host/IP WiFi Test Interface 802.11 b/g/n (2.4 GHz) Tests WiFi scan WiFi access point WiFi Scan Results SSID (secure set identification) Channel Security setting Power level MAC address WiFi Scan Modes AP List (Access Point) Channel graph Time graph WiFi Access Point Configure OneExpert DSL as WiFi access point (Ethernet to WiFi bridge) Coaxial Cable Testing Test Interface Coax using SmartID or SmartID Plus Test Probes (near end) SmartID, SmartID Plus Settings Supports any cable coax type with configurable velocity of propagation (VOP) and cable compensation Tests Locate cable runs with active RFIDs (requires SmartID Plus) Single-ended coax map (SECM) Tests Using SmartIDs as Remote Probes Locate cable runs with SmartIDs Dual-ended coax map (DECM) VDSL home-run check tests home coax runs for VDSL service use Whole-home check tests the entire coax network physical layer prior to HPNA test Test Results Noise ingress and frequency sweep test summary with pass/fail results Mapped overview of coax network Detailed view of cable lengths, faults, splitters, filters, amplifiers Graphically depicts frequency sweep data Copper Test - DVOM Test Interface Tip/A – ring/B – ground/earth AC Volts Range: 0 – 300 V peak Resolution: 1V Accuracy: 2% ±1 V DC Volts Range: 0 – 300 V Resolution: 1V Accuracy: 2% ±1 V Resistance Range: 0 – 999 Ω Resolution: 1 Ω Accuracy: 2% ±2.5 ΩRange: 1 – 9.99 kΩ Resolution: 10 Ω Accuracy: 2% Range: 10 – 99.9 kΩ Resolution: 100 Ω Accuracy: 2% Range: 100 – 999 kΩ Resolution: 1 kΩ Accuracy: 2% Range: 1.0 – 9.9 MΩ Resolution: 10 kΩ Accuracy: 2% Range: 10.0 – 100 MΩ Resolution: 100 kΩ Accuracy: 2% Leakage Range: 0 – 49.99 Ω Resolution: 1 Ω Accuracy: 2% ±2.5 ΩRange: 50 – 999 Ω Resolution: 1 Ω Accuracy: 2%Range: 1.0 – 9.99 kΩ Resolution: 10 Ω Accuracy: 2%Range: 10.0 – 99.9 kΩ Resolution: 100 Ω Accuracy: 2%Range: 100 – 999 kΩ Resolution: 1 kΩ Accuracy: 2%Range: 1.0 – 9.9 MΩ Resolution: 10 kΩ Accuracy: 5%Range: 10 – 99.9 MΩ Resolution: 100 kΩ Accuracy: 10%Range: 100 – 999MΩ Resolution: 1 MΩ Accuracy: 15% Distance to Short(conversion from resistance measurement depending on cable setup) Range: 0 – 30 k ft (0 – 10 km) Capacitance/Opens(conversion from capacitance measurement depending on cable setup) Range: 0 – 47.1 nF Resolution: 1% ±15 pFRange: 47.1 nF – 157 nF Resolution: 2% ±15 pFRange: 157 nf – 1.57 uF Resolution: 2% Range: 0 – 3 k ft (0 – 999 m) Resolution: 1 ft (1 m)Range: 3 – 10 k ft (1 – 3.3 km) Resolution: 10 ft (1 m)Range: 10 –100 k ft (1 – 33.3 km) Resolution: 100 ft (10 m) DC Current Range: 0 – 110 mA Longitudinal Balance Range: 28 – 70 dB Resolution: 1 dB Accuracy: ±2 dBRange: 70 – 120 dB Resolution: 1 dB Accuracy: Indication only Load Coil Counter Range: up to 5 ±1 TDR Test Interface Tip A – ring B RangeAccuracy 0 to 30 k ft (0 to 10 km)0.5% of distance Test Modes Standard SmartGain TDR In-home Features World view Peak hold QuickRange Reference trace set, show, save, load Stress TDR Typical Test Case 500 ft (150 m) bridged tap visible at 18 k ft (5500 m) on a 20 k ft (6000 m) 24 AWG cable/0.5 mm cable Short Range Range: 0 to 1000 ft (0 to 305 m)Resolution: 0.3 ft (0.1 m)Accuracy: 1 ft (0.3 m)TDR at VOP = 0.67 (AWG=24 or 0.5 mm) UFED TDR helper POTS Test Interface RJ11, tip A – ring B POTS Dialer DTMF or pulse-dial mode Ring detect Caller ID (Bellcore Telcordia TR-TSY-000030) Call log (last 10 calls) Phonebook (quick dial) General Power Supply Operating time > 4 hours for typical use cases Auto power down (adjustable) AC line operation via external adapter/car charger Battery LiOn internal rechargeable, 7.4 V nominal voltage, 6600 mAh Connector DSL test module 8-pin modular (RJ45 type) Ethernet 2 x 8-pin modular (RJ45) T/A, R/B, T1/A1, R1/B1 and ground/Earth 2 mm recessed banana POTS 8-pin modular (RJ45) and tip A – ring B USB 2 x USB 2.0 client ports Connectivity USB flash drive Remote operation Mobile device application Bluetooth Standard Bluetooth 2.1 + EDR, Bluetooth 4.0 ready WiFi Standard 802.11 b/g/n (2.4 GHz) Audio Support Speaker/microphone Bluetooth headset USB headset Permissible Ambient Temperature Nominal range of use 0 to 50°C (32 to 122°F) Storage and transport –10 to 60°C (14 to 140°F) Humidity Operating humidity 10 to 90% Display 127 mm (5 in) diagonal color WVGA (800 x 480 pixels) backlit LCD with projected capacitive multitouch screen Physical Size (L x W x H) 250 x 119 x 82.4 mm (9.8 x 4.68 x 3.2 in) Weight including batteries 1.9 kg (4.05 lb) Compliance CE marked For full JDSU ONX-580 ONX-BDCM-DSL-BONDED product specifications, please click here: JDSU ONX-580 ONX-BDCM-DSL-BONDED Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our Ebay Test Equipment Store. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to contact us for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet. Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more! We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you! We Ship World Wide! We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities. We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed. Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale. Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections) A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment. Thank you ALL MAJOR CREDIT CARDS & PayPal ACCEPTED Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 1449 USD

Location: Southgate, Michigan

End Time: 2024-11-25T15:12:11.000Z

Shipping Cost: N/A USD