ISR Performance Brake Line Kit compatible with Nissan 370Z 09-10 Akebono Brakes

Description: ISR Performance Brake Line Kit for Nissan 370Z 09-10 (Akebono Brakes) ISR Performance Brake Line Kit compatible with Nissan 370Z 09-10 (Akebono Brakes) Store | About Us | Contact Us Whats in the Box:2x Front Brake line assembly 2x Rear Brakes lines Installation Instructions* Brake line installation should be done by a professional mechanic. Read and follow installation instructions completelyRaise vehicle. Remove Wheels and drain all brake fluid. Carefully remove existing brake lines from vehicle, avoid splashing paint work with brake fluid. Make note of positions of C-clip(s), and banjo(s), if used. Remove all crush washers from there mating surfaces.Clean all sealing surfaces and make sure they are in good condition.Fit these lines starting at the caliper and following the original path of the OEM lines. Ensure all location tabs and mounting brackets are properly attached to their mating points on the frame or chassis and are not causing tension on either end of the connection. Do not fully tighten the bolts or threaded ends until the last step of the installation.Check that the lines are the correct lengths. The hoses should not be kinked or twisted. The opposite axis torque lines should remain parallel along the entire length of the hose. Full travel of the suspension and steering must be checked to ensure the hoses are not stretched or trapped.Tighten banjo bolts and end fittings. If you're tightening these hoses to a factory hard line, the hard line must be held in place using the correct size wrench. Bolts and end fittings should be tightened to the manufacture’s recommended torque specs. If not then tighten to 12 to 14 (ft/lbs).You are now ready to bleed the brakes. You must use fresh DOT approved brake fluid and bled the system in accordance to the vehicles manufacture’s recommendations.WARNINGBefore test driving your vehicle, make a final Check of the lines to ensure all connections are tight and do not leak. The brake pedal should be firm at this stage. After the first 100 miles recheck all the lines and connections for tightness and any leaks.It is not recommended to mix rubber hoses and stainless steel replacement lines on the same brake system.Do not try to force, rotate or stretch any stainless steel hose assembly; it may cause failure.** All ISR Performance Products are Designed for Off Road Use Only ** Shipping: Shipping isto the 48 US Continuous States. We can ship worldwide, however the cost is significantly more. For all other locations, please contact us. Trucking will be used for oversized products. All orders for products that we have in stock will be shipped the same day provided the order is placed before 3:00 P.M. Central time. For all international shipping including Canada, please include your telephone number in the comments section. **We only ship to confirmed address by Paypal**. Larger packages or more expensive items will need to be signed for upon delivery. __________________________________________________ Why Buy from Enjuku Racing Parts, LLC: Enjuku Racing Parts, LLC. has been established since 1999 and we continue to grow thanks to our customers! We began specializing with the Nissan 240SX and SR20DET Performance. Known around the United States and around the world for our knowledge and industry leading service we strive to improve and find new ways to help our customers. As one of the premier tuning shops for S-Chassis performance, we've started to expand into other Nissans such as the 350Z and 370Z, RB25DET Swaps, VQ Swaps, and more to come! We continue to grow what we offer for other chassis as well, stay tuned! We try our best to stock the very best in performance products. ___________________________________________________ Contact Details: Phone: 352-241-8399 & 1-888-SR20DET - We know 240's | Enjuku Racing Parts, LLC. 300 Hatteras Ave Clermont, FL 34711

Price: 103.5 USD

Location: Clermont, Florida

End Time: 2024-08-31T20:17:29.000Z

Shipping Cost: 0 USD