Industrial Degreaser – Oil Cleaner With Oil Eating Microbes

Description: BIO-LIQUID CLEANER. Digest hydrocarbons on contact as it cleans the surface. Bio-Liquid Cleaner is an orange turpene based bio-remedial cleaner with oil eating microbes. It is used in lieu of general cleaner/degreasers because it will digest hydrocarbons on contact as it cleans the surface. Bio-Liquid Cleaner makes disposal extremely simple because the byproducts of the bio-remedial process are carbon dioxide and water. Cleans and remediates petroleum on any hard surface. Bio-Liquid Cleaner can be applied using a manual sprayer and brush or pressure washer. ●REDUCES "TPH" ●DIGESTS INDUSTRIAL HYDROCARBON WASTE ●REDUCES "BTEX" ●100% ENVIRONMENTALLY SAFE ●REMOVES OIL SHEEN FROM WATER ●REMEDIATES OIL IN OIL/WATER SEPARATORS ●CLEANS ASPHALT, CONCRETE, VEHICLES, EQUIPMENT OR ANY HARD SURFACE THE BYPRODUCTS OF THIS BIO-REMEDIAL PROCESS ARE CARBON DIOXIDE (CO2) AND WATER (H2O). DIRECTIONS FOR USE AGITATE OR SHAKE CONCENTRATE OR DILUTED MIXTURE BEFORE EACH USE. PRESSURE WASHER DIRECTIONS 1. Insert the mixing tube directly into the spout of the 5 gal pail of BIO-LIQUID CLEANER. 2. Adjust Concentration levels to dilute 24 oz of BIO-LIQUID CLEANER to 1 gallon of water. 3. Apply the mixture directly on the area you wish to clean and degrease. 4. Use the "pressure" to aerate and agitate the stubborn areas. 5. Allow the area to remain wet for 20-30 minutes if possible. Rinse. (on asphalt, rinse immediately after agitating). 6. Very old stains may need a second application. 7. Run clear water thru pressure washer after use. MANUAL SPRAYER & BRUSH DIRECTIONS 1. Mix 24 ounces of BIO-LIQUID CLEANER per gallon of water. 2. Spray the stained area with the mixture, being sure to cover the entire area to be cleaned. 3. Agitate the area with a stiff broom or brush. 4. Allow the area to remain wet for 20-30 minutes or longer if possible before rinsing. (On asphalt, rinse immediately after agitating. 5. Rinse the area with the strongest water pressure. 6. Very old stains may need a second application. 7. Run clear water thru sprayer after use. AABACO Industries Inc. warrants that the product conforms to its description and is reasonably fit for the purpose stated on this label when used in accordance with directions under normal conditions of use; but neither this warranty or any other warranty of merchantability of fitness for a particular purpose, expressed or implied, extends to the use of this product contrary to label instructions not reasonably foreseeable to the seller, and buyer assumes the risk of any such use.

Price: 39.95 USD

Location: US

End Time: 2024-11-05T21:30:14.000Z

Shipping Cost: 0 USD