Description: This auction is for one new DynoTune 4&6 cyl IMPORT wet nitrous oxide system for EFI applications. No bottle/brackets or bottle nut included! This System will work on all cars and comes complete with all the parts and instructions needed to install on any 4 and 6 cylinder EFI engine. The system is good for up to an additional 75 HP increase (up to 175HP with diffrent jets). This EFI wet Kit is the most complete kit available all the way down to the Tap for the nozzle. Quality stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass. Please compare part per part against the competion, the DynoTune kit is complete! This DynoTune Nitrous kit is tuned for Safe reliable Horsepower increase. More and more folks are switching to DynoTune products due to the price, Performance, innovation and support you will get with no other Manufacturer. Isn’t it time you made the switch? NOTE: Do not use any chips or devices that will advance the ignition timing beyond stock. An increase in Octane or Octane boost may be required for your application. The Kit contains the following: 16 foot braided stainless feed line, blue fittings Solenoid mounting bracket with hardware High Flow Nitrous solenoidHigh Flow fuel solenoid (e85 compatible) 2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings and a Braided stainless line for Fuel rail test port installation, red fitting Jets for 35, 50 and 75HP(max 175hp with diffrent jet) High flow Wet Nozzle 1/16" NPT Nozzle tap for taping into aluminum or thick plastic 5/16" fuel injection hose with clamps and brass "T", all fittings and clamps for a complete installation Wet Nozzle Mounting adaptor so the Nozzle does not blow out during injection causing a fire, makes mounting the nozzle in plastic or rubber a snap! Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc.. Micro throttle activation switch and mounting bracket Our 18 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for all wet fuel injection applications
Price: 299 USD
Location: Bradenton, Florida
End Time: 2024-08-01T18:02:33.000Z
Shipping Cost: 12.95 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Return policy details:
Brand: DynoTune
Manufacturer Part Number: Does Not Apply
