Description: From ZZXIO comes this converter to allow IBM PS/1 and PS/2 computers to use standard floppy drives. These models of IBM computers have the power provided over the 34 pin connector, which will fry a "modern" floppy drive. This adapter routes the power out of the 34 pin connector into a traditional 4-pin Molex connector. There is a single jumper on the unit that allows pin 4 to either be passed through directly to the drive or to a resistor connected to ground. The default is to directly connect pin 4 to the drive. This is not for systems/drives with an edge connector. They are available here: https://www.ebay.com/itm/304451554612 Here is a list of models this was confirmed to work on, I will update the list as people provide feedback. 25-28630-808630-28655 SX90L40 SX (original battery won't fit when the adapter is used)P70 (Use a floppy drive less than 140mm in length with the faceplate removed)P75 (Use a floppy drive less than 140mm in length with the faceplate removed)Reply TurboBoard 60/65/80 This adapter will not work with systems that require media sense drives. An adapter will be available shortly for these systems. I offer free returns if the adapter turns out to not be compatible with your system.
Price: 15.99 USD
Location: Plymouth, Connecticut
End Time: 2024-08-04T12:22:09.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Type: Converter
Compatible Model: PS / 1 PS / 2 34
Connector A: 34 Pin, PS/2
Connector B: Floppy Drive
Brand: Unbranded
