Holybro M9N GPS Module Compass LED For Pix32 Pixhawk 4 Flight Controller Drone

Description: Holybro M9N GPS Module with Compass LED Indicator For Pix32 Pixhawk 4 Flight Controller Product Details:PX4 Autopilot users:The GPS RGB LED Driver Chip has been updated. Ensure the PX4 firmware is Stable Release v1.12.2 or newer for proper LED driver Support.Ardupilot User:If unable to preform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.Descriptions：The M9N GPS has an UBLOX M9N module, IST8310 compass, tri-colored LED indicator, and a safety switch. There are 3 different connectors options for differentpurposes.This module ships with a baud rate of 38400 5HzFeatures and Specifications: - Ublox Neo-M9N module- Industry leading –167 dBm navigation sensitivity- Cold starts: 26s- LNA MAX2659ELT+- 25 x 25 x 4 mm ceramic patch antenna- Rechargeable Farah capacitance- Low noise 3.3V regulator- Current consumption: less than 150mA @ 5V- Fix indicator LEDs- Protective case- Cable Length: 26cm (42cm cable can be purchase here)- Diameter 50mm total size, 32 grams with case.Package Included:M9N GPS Module *1‘X’ type folding pedestal mount *1Carbon rod 70mm & 140mm *1 Holybro M9N GPS Version : Holybro M9N GPS (JST GHR1.25mm 10pin cable):This JST GH 10Pin connector can be used on Pixhawk Standard Flight Controller 10pin “GPS Module” or "GPS1" input port. Holybro M9N GPS for Pix32 2.4.6 Version :Holybro M9N GPS for Pix32 (Molex1.25mm 6pin & 4pin & 3pin cable):These Molex1.25mm 6pin & 4pin &3pin connectors are for Pix32 "Switch", "GPS", and "I2C" input ports. Holybro M9N 2nd GPS version:Holybro M9N 2nd GPS (JST GHR1.25mm 6pin cable)：This JST GH 6Pin connector can be used on Pixhawk Standard Flight Controller 6pin“UART & I2C”or "GPS2" input port as secondary GPS. This GPS is also compatible with the Cube Flight Controller GPS2 port. Dimensions

Price: 72.68 USD

Location: Shenzhen

End Time: 2023-12-04T10:03:26.000Z

Shipping Cost: 0 USD