HELIX M SIX DSP 6x100w 10-Ch DSP + M ONE X 1180w RMS @ 1-Ohm Mono Sub NEW

Description: HELIX COMBO· HELIX M SIX DSP 6x100w RMS + 10-Channel DSP · HELIX M ONE X 1180w RMS @ 1-Ohm Monblock Class D Subwoofer Amplifier HELIX M SIX DSP Features Up to 130 Watts RMS max. output power per channel into 4 & 2 ΩExtremely powerful 64 Bit “fixed point” Audio DSP and state-of-the-art AD and DA signal convertersACO – Advanced 32 Bit CoProcessor platform for enhanced system and DSP features like:ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signalsSFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co.Smart 6-channel highlevel input with ADEP.3 circuitFour RCA / Cinch line outputs with max. 6 Volts output voltageVirtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systemsBridgeable amplifier channels for driving powerful woofer or subwooferDSP-board manufactured in GermanyTechnical data Power RMS ≤ 1% THD+N - @ 4 Ohms6 x 100 Watts - @ 2 Ohms6 x 100 Watts- @ 1 Ohm- - bridged @ 4 Ohms3 x 200 Watts- bridged @ 2 Ohms- Max. output power per channel*Up to 130 Watts RMS @ 4 / 2 OhmsAmplifier technologyClass DInputs6 x RCA / Cinch6 x Highlevel speaker input1 x Optical SPDIF (12 - 96 kHz)1 x Remote InInput sensitivityRCA / Cinch 1 - 4 VoltsHighlevel 5 - 20 VoltsInput impedance RCA / Cinch22 kOhmsInput impedance highlevel9 - 33 Ohms or 20 kOhmsOutputs6 x Speaker output4 x RCA / Cinch2 x Remote OutOutput voltage RCA / Cinch6 VoltsFrequency response20 Hz - 22,000 HzDSP resolution64 BitDSP power295 MHz (1.2 billion MAC operations/second)Sampling rate48 kHzDSP typeAudio signal processorSignal-to-noise ratio digital input105 / 108 dB Speaker / Line Output (A-weighted)Signal-to-noise ration analog input102 / 105 dB Speaker / Line Output (A-weighted)Distortion (THD)< 0.03 / 0.005 % Speaker / Line OutputDamping factor100Operating voltage10.5 - 16 Volts (max. 5 sec.down to 6 Volts)Idle current1950 mAMax. remote output current500 mAOperating temperature range-40° C to +70° CFuse2 x 35 A Maxi-fuse (APX)Power ratingDC 12 V ⎓ 80 A max.Additional featuresADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control InputDimensions (H x W x D)50 x 320 x 154 mm /2.00 x 12.60 x 6.06”* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)HELIX M ONE XFeatures § Small footprint Class D amplifier with up to 1,180 Watts RMS output power @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel § Start-Stop capability down to 6V supply voltage § Smart highlevel input with ADEP circuit and Auto Turn-On function § Integrated, active crossover with lowpass, bass boost, subsonic and phase control § TwinPower Link for connecting two amplifiers in bridged mode § Bass remote control for volume adjustment § Low heat dissipation thanks to extraordinary efficiency Technical data Power RMS ≤ 1% THD+N Normal operation (One amplifier) TwinPower Link (Two amplifiers) - @ 4 Ohms 1 x 400 Watts 1 x 1,400 Watts - @ 2 Ohms 1 x 700 Watts 1 x 2,060 Watts - @ 1 Ohm 1 x 1,030 Watts - - bridged @ 4 Ohms - - - bridged @ 2 Ohms - - Max. output power per channel*: Up to 1,180 Watts RMS @ 1 Ohm Amplifier technology Class D Inputs 2 x RCA / Cinch 2 x Highlevel speaker input 1 x Remote In 1 x Remote control input Input sensitivity RCA / Cinch 0.5 - 6 Volts Highlevel 1.1 - 13 Volts Input impedance RCA / Cinch 20 kOhms Input impedance highlevel 9 - 33 Ohms Outputs 1 x Speaker output Output voltage RCA / Cinch - Signal converter for digital input - Frequency response 10 Hz - 250 Hz Bass boost 0 - 12 dB / 30 - 80 Hz Highpass - Lowpass 50 Hz - 250 Hz adjustable Bandpass 10 Hz - 250 Hz adjustable Subsonic 10 Hz - 50 Hz adjustable Phase 0 - 180° adjustable Slope high- / lowpass - Slope subsonic / lowpass 12 / 24 dB/Oct. Signal-to-noise ratio digital input - Signal-to-noise ratio analog input 95 dB (A-weighted) Distortion (THD) 0.20 % Damping factor 150 Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current 800 mA Operating temperature range -40° C to +70° C Fuse 3 x 40 A Maxi-fuse (APX) Power rating DC 12 V ⎓ 106 A max. Additional features Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control Dimensions (H x W x D) 50 x 320 x 154 mm / 2.00 x 12.60 x 6.06”

Price: 1199 USD

Location: Yakima, Washington

End Time: 2024-09-17T18:32:46.000Z

Shipping Cost: N/A USD