GTC TA500 Smartach + COP Multisystem Ignition Analyzer

Description: TA500 Smartach+COP: Multisystem Ignition Analyzer UNIQUE TECHNOLOGY: Unique and proprietary technology allows the user to perform quick and reliable diagnostics of non-starts, misfires, fouled up or damaged spark plugs. EASY TO USE: the TA500 requires no special adapters, cables or a scope. EASY TO INTERPRET: The large digital display that shows spark plug voltage, spark burn time, RPM, as well as Min/Max readings in real time. TA500 Smartach+COP: Multisystem Ignition Analyzer quantity Add to cart Quick Links Description The TA500’s unique and proprietary technology allows the user to perform quick and reliable diagnostics of non-starts, misfires, fouled up or damaged spark plugs and/or spark plug wires, by comparing digital read-outs of the spark plug voltage and spark burn time between cylinders on engines using Coil on Plug, Coil near Plug, conventional distributor/ignition coil, DIS (Distributor-less) or waste spark and magneto technologies. Simple to use, the TA500 requires no special adapters, cables or a scope and is equipped with a large digital display that shows spark plug voltage, spark burn time, RPM, as well as Min/Max readings in real time. Applications Automobiles Trucks Boats High performance racing cars Motorcycles Skidoos Snow mobiles Lawnmowers Chainsaw Power generators Any engine equipped with spark plug ignition systems Specifications Maximum spark plug wire voltage (Through capacitive pickup only): 49.9 kiloVolts Display: Large 4-1/2 Digits LCD + 2 x 3-1/2 + 0 Digits secondary displays (for Maximum, Minimum and other functions) Tachometer Range: 200 to 19999 RPM Cycles: 2 and 4 Cycles, and DIS Tachometer accuracy: ± 0.5% + 1 LSB Response time: 0.3 Seconds Ignition peak voltage range: 0 to 49.9 KVolt Probe: 12″ (30 cm) flexible probe with capacitive pick-up Secondary ignition pick up: Capacitive sensor Spark Ignition System: Coil on Plug, Coil near Plug, Distributor, Magneto and D.I.S.(Distributor-less or waste spark ignition system) Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22 Battery life: Approx. 20 hours of operation Power Saving: Auto power off after approximately 3 min. of inactivity Physical dimensions : 6.1″ (H) x 4″ (W)x 1.5″ (D) (155 x 102 X 38 mm) – including holster but excluding antenna Weight: Approximately 12.4 Oz ( 355 g) Including battery How-To: Ignition Analyzer: Place the antenna’s capacitive sensor on top of the Coil on Plug module, or over a spark plug or ignition coil wire. Spark peak voltage and spark burn time are displayed. Tachometer: Set the number of cycles and type of ignition system, and then either place the capacitive sensor on a coil on plug module or spark plug wire, and RPM is displayed. Selectable display functions: The display can be set to show all three (RPM, spark burn time and spark plug voltage)measurements simultaneously, or one of the selected measurements with real time maximum and minimum readings. Spark capture mode: Maximum and minimum captures the spark peak voltage and spark burn time for testing of ignition systems for no start conditions diagnosis.

Price: 169.95 USD

Location: Riverhead, New York

End Time: 2024-11-25T04:24:20.000Z

Shipping Cost: N/A USD