Description: GM Genuine SuperMatic 6L80-E 2WD Transmission Kit + Controller Kit For LS / LSX DescriptionBRAND NEW IN BOXThis listing is also available for local pickup!Includes:GM Genuine SuperMatic 6L80-E 2WD Transmission Kit # 19366637GM Genuine Engine Controller Kit # 19354328 FITMENT : For GM LS / LSX 2400-2800 Stall 1-) Part Number: 19366637SuperMatic 6L80-E Six-Speed Transmission Developed with upgraded internal components, Chevrolet Performance’s SuperMatic 6L80-E six-speed automatic transmission offers an exceptional torque rating of 664 lb.-ft.—a 45-percent increase over regular-production versions of the six-speed automatic. A deep 4.02:1 first gear enables strong launch performance, while the 0.67:1 top gear supports balanced performance on the highway. It is designed for use with Chevrolet Performance’s LS and LSX crate engines, as well as LT1 and LT4 crate engines. A 4WD version is available for LS/LSX engines and includes a tail designed to mate with a transfer case. ADDITIONAL HIGHLIGHTS : • Electro/hydraulic controls with clutch-to-clutch shifting• Output torque rating: 650 lb.-ft.• Gear ratios: 1st: 4.02, 2nd: 2.36, 3rd: 1.53, 4th: 1.15, 5th: 0.85, 6th: 0.67• Lightweight die-cast aluminum case contributes to dry weight of approximately 195 lbs.• Uses DEXRON VI premium fluid• Does not include dipstick• Includes truck-style production oil pan (use Shallow Pan Kit P/N 19418242 for increased ground clearance)• Includes production vent tube assembly• Kit includes controller and harness, with calibrations for street and track; harness also includes paddle-shift connection• Kit includes transmission bulkhead connector that supports aftermarket gear indicator displays, electronically controlled shifters and more• Chevrolet Performance-specific design includes provisions for an aftermarket transmission cooler, including -6 AN fittings• Do not use this transmission in place of a GM service transmission – the calibration in the transmission control module is not compatible with production systems 2-) Part Number: 19354328Engine Control Modules and HarnessesThe engine control module is the is the brain of your Gen III/IV LS- or Gen V LT-powered project vehicle and Chevrolet Performance is your source for controllers designed for easy, “plug-and-play” installation and, in most applications, no need for third-party tuning adjustments. Unlike controllers from regular-production vehicles, which may or may not come with a used engine, Chevrolet Performance controllers are uniquely calibrated for installation in older vehicles. That means many features required for late-model production vehicles are “turned off,” because they’re not required in older cars and trucks. That prevents the unnecessary triggering of diagnostic trouble codes that could possibly affect performance or require additional calibration adjustments. Our inclusive kits deliver all the components required to plug into the engine and get it running – from the controller itself and the accompanying wire harness to the mass airflow sensor, oxygen sensors and even a throttle pedal assembly for engines equipped with an electronic throttle body. The kits also include detailed instructions to help you do it right the first time, even if you have no experience. Most kits include:• Two oxygen sensors• Two oxygen sensor mounting bosses (for installation in the exhaust system)• A mass airflow meter• A mass airflow meter mounting boss (for installation in the air intake system)• A throttle pedal assembly (for use with the electronically operated throttle)• A specific oil pressure sensor that is compatible with the harness (when needed)• A complete wiring harness with fuse box and necessary cam sensor and MAP sensor jumpers• Fuel pump power module for direct injected engines• Fuel pressure sensor for direct injected engines• The programmed controller• An instruction sheetEach Chevrolet Performance controller kit is a true stand-alone system. All that’s needed to get a vehicle running with it are power and ground sources, a high-pressure fuel pump and an electric cooling fan. LS2/LS3 Engine Controller KitIncludes all the components required to run the LS3 crate engine. Max rpm 6,600. For individual engine controller, use P/N 19354329(included in kit). Ask us about saving money with our PACKAGE DEALSCP Cometic ACL Ferrea and ARP KitsCustom Made Package DealsAEM Package DealsPackage DealsAsk us about combining purchases for package deal auctionsPistonsRodsBearingsHead and Main Studsand more...ShippingWe ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.We also offer expedited shipping at an extra cost.International shipping rate applies to addresses in all other locationsCustom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.Item ships within one business day after the payment has cleared or same day if paid by 12pm PST unless additional handling stated.Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.There's a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes and any address that is out of 48 lower states. Please contact prior to get a shipping quote.We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.Ebay Promotional Shipping is only good for shipments going to 48 lower states only.We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.Shipping charges are non-refundable.We will gladly combine shipping charges to one charged based on the total weight of the package. YLDPaymentWe require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.International Buyers, please contact us before bidding to discuss the shipping cost.We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any questions.. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through eBay as soon as possible. Please contact us if you have any questions.
Price: 7370.9 USD
Location: San Diego, California
End Time: 2024-12-16T17:53:04.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Items Included: truck-style production oil pan, production vent tube assembly, controller and harness, with calibrations for street and track, transmission bulkhead connector
Gear ratios 3rd: 1.53
Custom Bundle: Yes
Transmission Speeds: 6
Manufacturer Part Number: 19366637, 19354328
Bundle-2: GM Genuine Engine Controller Kit # 19354328
Bundle-1: GM Genuine SuperMatic 6L80-E 2WD Transmission Kit # 19366637
California Prop 65 Warning: Cancer & Reproductive Harm- www.P65Warnings.ca.gov
Brand: GM
Type: Automatic Transmission + Engine Controller Kit
Gear ratios 1st: 4.02
Gear ratios 2nd: 2.36
Gear ratios 4th: 1.15
Output torque rating: 650 lb.-ft.
Gear ratios 6th: 0.67
Gear ratios 5th: 0.85
Universal Fitment: No
Performance Part: Yes
