GFB Go Fast Bits T9352 DV+ Diverter Valve 2007-2010 Mini Cooper N14 1.6L Turbo

Description: Guaranteed In Stock Or We'll Give You $20! DV+ DIVERTER VALVE WITH TMS ADVANTAGE FOR 2007-2010 MINI COOPER S 1.6L TURBOCHARGE N14 ENGINE Manufacturer: Go Fast Bits Part#: T9352 FITS:MINI Cooper S R56 N14 Engine only R56 128kw Petrol Engine FWD Hatchback 10/06-01/11MINI John Cooper Works R56 N14 Engine only R56 155kw Petrol Engine FWD Hatchback 11/07-11/13MINI Cooper S R57 N14 Engine only R57 128kw Petrol Engine FWD Convertible 03/09-06/15MINI John Cooper Works R57 N14 Engine only R57 155kw Petrol Engine FWD Convertible 08/08-05/15MINI Mini Clubman Cooper S R55 N14 Engine only R55 128kw Petrol Engine FWD Wagon 10/07-12/14MINI Mini Clubman John Cooper Works R55 N14 Engine only R55 155kw Petrol Engine FWD Wagon 11/07-12/14 Introducing the new DV+ for Mini, Citroën and Peugeot applications!Gfb’s Dv+ Solution Couldn’t Be Simpler – Keep What Works And Replace What Doesn’t.Uses factory solenoid coil for seamless integrationReplaces plastic valve parts with metal for reliability and strength on chipped enginesDirect-fit replacement with GFB’s TMS benefitsExclusive “pilot-actuated” valve mechanism for rapid response at high boostGFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles.The solenoid coil itself from the factory-fitted valve is great- the ECU opens it faster than any pneumatic valve so why replace it? The weak point however, is the valve mechanism itself. GFB’s DV+ solves this problem by replacing the valve parts with an anodised billet aluminium housing, fitted with a brass piston machined to exacting tolerances.The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Read all about the DV+ story below. Other manufacturers’ products involve replacing the entire system with a traditional pneumatic valve. This approach requires long vacuum hose runs, additional parts for tapping into the intake manifold vacuum, plus a different solenoid valve to actuate the pneumatic valve, or a ballast resistor to plug into the OE wiring loom. All these additional items result in a product that is slower, less responsive, more expensive and takes much longer to install.GFB’s DV+ solution on the other hand is more responsive, less expensive, easier to install, and doesn’t cause compressor surge/ turbo flutter. Oh, and it doesn’t require different springs or frequent re-builds either.GET BETTER PERFORMANCE, FASTER BOOST RECOVERY AND DON’T PAY FOR WHAT YOU DON’T NEED!The DV+ Story: Better Performance – More ReliableMany late-model European cars use ECU controlled solenoid-type diverter valves. This is a good concept because the valve can react very quickly and it only opens when it needs to.However, there are some problems with these valves;The diaphragms are weak and known to rupture, especially if boost has been increased. Once this happens, the valve will no longer hold boost pressure.The plastic lip that surrounds the diaphragm is very thin and pieces can break off, potentially ending up going through the turbo.Additionally, the solenoid on the OE diverter is directly connected to the valve mechanism, which is not ideal because neither it nor the return spring are strong enough to open and close the valve reliably at high boost.With problems like this, you can see why other aftermarket manufacturers assume the best solution is to replace the factory diverter entirely, or change it to a purely pneumatic system. Unfortunately though, whilst their replacement kits might be stronger than the factory diverter, their slower response speed and lower flow do not justify the extra cost and complexity – more of a compromise than a solution.GFB has taken a different approach to deliver a complete solution that solves existing problems and improves performance, without compromise or a hefty price tag.The DV+ addresses the factory valve problems with a very simple and elegant solution. Keeping the factory solenoid, the DV+ retains all the benefits of the stock system. Also replacing the valve parts with indestructiblemetal components ensures strength and reliability, no matter how much boost you run.That’s not all; rather than using the solenoid to directly actuate the valve, we’ve introduced a unique “pilot-actuation” system. This means the solenoid only has to control airflow through a small passage that is then used to open and close the piston (rather than opening and closing the piston directly), so it doesn’t matter how much boost you push through it, the DV+ will open and close reliably without ever exceeding the solenoid’s capability.This feature also improves on the factory system by opening the valve progressively in response to boost pressure, so it only opens as much as required to get the job done (the factory valve simply opens and shuts, it cannot partially open if boost pressure is low), resulting in better throttle response. Store Policies Welcome to our eBay store! Questions? Contact us! We are here to assist you! Message us from the eBay listing that you are interested in and we can make sure we accurately address your question. Sales Tax For shipments toNew Yorkaddresses, we are required by State law to collect8%Sales Tax. eBay collects taxes to other applicable states on our behalf. Shipping ALL PRODUCTS IN THE MotoMavens EBAY STORE IS IN STOCK AND READY TO SHIP IMMEDIATELY! Orders ship FREE to any address inside the 48-state contiguous United States. Any address outside of the 48-state contiguous United States, please contact us for a shipping quote. Return Policy MotoMavens eBay Store allows returns of any item, in new and unused condition with original packaging, within 30-days of receiving the item for a refund or exchange. Absolutely NO returns or exchanges allowed on products that have been used, installed, mounted, or missing components. All non-defective returns are subject to a 20% restocking fee. All returns must be accompanied by a Return Merchandise Authorization (RMA) number which can be obtained by contacting us. Any products returned without a Return Merchandise Authorization (RMA) number will be refused. Please contact us in the event you're not satisfied with your purchase as we are more than happy to work with you to ensure a positive experience.

Price: 143.1 USD

Location: Binghamton, New York

End Time: 2024-08-08T20:21:47.000Z

Shipping Cost: 0 USD