Gemini 3/8" NPT CFM8 SS DBL Act Spring Failsafe Pneu Act 12VDC EPDM Seal

Description: NEW! Gemini 3/8" NPT CFM8 Stainless Steel DBL Act Spring Failsafe Pneu Act 12VDC EPDM Seal!!SHIPPING IS IN THE LOWER 48 STATESUsually Ships in 7-10 daysGemini 3/8" NPT CFM8 Stainless Steel DBL Act Spring Failsafe Pneu Act 12VDC EPDM SealPerformance Automation Series; CFM8 stainless steel body with 316 stainless steel ball and stem ball valve. Seats are glass reinforced P.T.F.E. (Teflon®), Stem Seal EPDM. Pipe connections are NPT (National Pipe Taper) female screwed end. Temperature Range -50°F to 250°F (-45.5°C to (121.1°C). Valve Body Pressure Rating 1,000 psi C.W.P. (Cold Working Pressure) Maximum Pressure Differential 400 psi C.W.P. – also see Differential Pressure Temperature Chart). Products are marketed per Gemini Valve Standard Terms & Conditions. All Gemini Valve Products MADE IN USA.Valve is operated by our exclusive double-acting, spring-failsafe pneumatic actuator with integral pilot / solenoid valve standard. The pneumatic actuator primarily functions as a double-acting model, requiring air pressure to open and close for normal operation. In the event of a power loss, the integral solenoid valve will return the valve to the normally closed position. While in the event of the air loss, the normally inactive compressed springs will automatically release and likewise return the valve to the normally closed position. This unique, energy saving design provides for extended service life and low air consumption by utilizing the spring-return failsafe function only when needed. The actuator operates on 60-125 psi air supply with an cycle (index) time of 1/2 to 1 second depending on model and load. Temperature Rating -20°F to 350°F (-28.8°C to 176.6°C). Actuator body aluminum with Teflon® impregnated hard anodized surfaces. Hardware 300 Series Stainless Steel. Permanently lubricated – maintenance free. Visual Open / Close indicator. ISO Mounting for accessories including Limit Switch.The pneumatic actuator is piloted by our five-way direct mount NAMUR solenoid valve. Air connection is 1/8” NPT female. Air supply 60-125 psi. Coil voltage is 12VDC class F; continuous duty, 5 watts. Electrical connection DIN X Conduit; 1/2". Protection IP65 dust tight / water resistant.SKU870506N66RE512CS5P290 SpecificationsValve TypeTwo-Way, On / OffValve StyleTwo-Piece Body - Standard PortValve Connection Size3/8" NPT femaleValve Port Size0.50Valve Body MaterialCFM8 Stainless SteelValve Ball & Stem Material316 Stainless Steel / 17-4 SSValve Seal MaterialP.T.F.E. (Glass Filled Reinforced Teflon®) / EPDMValve Temperature Range-50°F to 250°F (-45.5°C to 121.1°C)Valve Pressure Rating1,000 PSI C.W.P. (Cold Working Pressure), Saturated Steam 150 PSIValve Vacuum Rating20 MicronValve OperatorActuatorValve Operator TypeDouble-Acting, with Spring-Failsafe 60-125 PSIActuator EnclosureAluminum with Teflon® Impregnated Hard Anodized Surfaces / Trim 300 Series StainlessActuator Temperature Range-20°F to 350®F (-28.8°C to 176.6°C)Actuator Duty Cycle100%Actuator Cycle Time1/2 to 1 second / model - load dependentSolenoid Voltage – Electrical Connection12VDC - DIN X Conduit; 1/2"Integral Pilot / Solenoid ValveNAMUR Five-WayActuator Supply ConnectionNAMUR / (2) 1/8" NPT femaleLimit SwitchNone

Price: 699.95 USD

Location: League City, Texas

End Time: 2025-01-09T11:31:07.000Z

Shipping Cost: 39.95 USD