GDS-63 Dual Blower Motor Replacement for Napoleon GDS50 / GS50

Description: GDS-63 Dual Blower Motor Replacement for Napoleon GDS50 / GS50 Aftermarket GDS-63 dual cage blower motor assembly replacement for the Napoleon GDS50 / GS50 Havelock™ gas stoves. INCLUDES #W290-0032 replacement gasket! This listing is for the blower only. 100% ball bearing, quiet and 180+ CFM of air flow. Equal if not better quality than the OEM blower. Blower will be shipped with two motor wires (male terminals) and one grounding wire with ring amp ring terminal. How to Replace Blower on Napoleon GDS50 / GS50 Turn off the electrical power and the gas supply to the appliance. Open the lower louvre control door, the two side doors and the fire viewing door. Remove the logs. Remove the relief door assembly held on with 6 screws. Discard the gasket. Disconnect the two blower wires. Remove the blower bracket held on with 4 screws. Replace the blower using the existing bracket. When connecting the replacement blower, tighten the screws without distorting the rubber grommets. Replace the bracket / blower assembly in the appliance. Reconnect the two wires. Hold the replacement gasket in place and reattach the relief door assembly. Replace the logs. Close all doors. Turn the gas supply and electricity back on. Because the blower is thermally activated, when turned on, it will automatically start approximately 15 - 30 minutes after lighting the appliance and will run for approximately 30 - 45 minutes after the appliance has been turned off. Use of the fan increases the output of heat. Benefits of Adding a Fireplace Blower Improves fireplace efficiency by as much as 80% Helps reduce costly energy bills Heats large rooms effectively Installs quickly and easily Affordable and efficient Read More Included With Purchase OEM quality ball bearing blower motor Gasket included Thermal safety switch on motor Impedance protected 1 year manufacturer's warranty Product Details Specifications Dimensions L x W x H 12.80" x 4.5" x 4.25" Blower, Motor & Bearing Type AC Shaded Pole Rotation CW Blade Type High temp composite Housing Material Black powder coated steel Bearing Type Ball Outboard Bearing Type N/A Bearing Lubrication High Temp Motor Insulation Class H (rated to 392°F) Motor RPM 3000 (2400 with load) Air Flow CFM 180 Installation Mounting Type Integrated bracket, side mounts Electrical Volts 115 Motor Frequency 60 Hz Watts 184 Amperage 1.6 Power Cord Yes Power Cord Length 3 ft Power Cord Type Designed for 3-prong grounded Accessories Rheostat Variable Speed Controller Not included Thermostat Not included Thermostat Type N/A Thermostat Temperature N/A Other Packaging Materials Shipping box, bubble wrap, foam Compatibility Napoleon GDS50 Havelock™ Documents Installation Instructions On Request Listing and template services provided by inkFrog

Price: 259.95 USD

Location: Racine, Wisconsin

End Time: 2024-09-27T14:00:35.000Z

Shipping Cost: 0 USD