Description: Here at MadMopeds we only supply parts that we use on our own bikes and our customers bikes in our workshop so you can be assured of them being of good quality. These impossible to find fuel tap filters are for Yamaha DT125 and DT125 taps but will fit many other taps too * Kawasaki GPZ500S * Suzuki Bandit GSF600 and GSF1200 Mark 1 * Suzuki DRZ400 * Yamaha YZF R6 1999 onwards (old filters may be peened in and holes may need to be cleaned out or re drilled) * Yamaha TZR125 (slightly reduce the outside of one filter to fit inside your casting) * Yamaha DT125 (check type of tap that you have before buying please) PLEASE DO NOT BUY THESE UNLESS YOU HAVE ACCURATELY MEASURED YOUR TAP. WE DO NOT ACCEPT RETURNS OR 'DOES NOT FIT' CLAIMS ON THESE. SORRY They are the best available and are suitable for both the 7 mm external diameter brass petrol pipe on the original OEM non vacuum and vacuum type petrol taps as well as the 8.5 mm reserve filter that fits inside the casting body of the tap. You are buying 2 two filters that are 38 mm long. We have done our homework on these and they will not be too big or need to be glued on or in like others that may be available elsewhere. These ones are a good tight fit inside the body or casting of the tap. Warm the plastic up with your fingers or with hot water to push these push in or on DO NOT use heat guns on these filters. The 8.5mm larger filter may need to be slightly reduced to fit into the old casting CAREFULLY reduce the outside of the filter for the casting with sandpaper. Note --- We also have filters in lots of other sizes for other taps too. SEARCH FOR FILTER SET within our shop search bar. Measure the size of the hole in your casting and the brass tube (measure very accurately please with calipers) We also sell excellent quality replacement petrol taps for all of the models listed above should you not be able to find all the spare parts required to refurbish your OEM Tap We can also supply you with the best quality heavy wall thickness fuel pipe and stainless steel clips to suit your OEM or new tap. Our pipe is E5 and E10 petrol resistant so please see our other listings if you need some. Dispatched using 2nd Class large letter postage. If you need it faster please select the 1st class postage option for only 1 extra.... But sometimes 4 or 5 days faster MadMopeds UK
Price: 9.96 GBP
Location: Beccles, Suffolk
End Time: 2024-02-11T12:56:00.000Z
Shipping Cost: 17.31 GBP
Product Images
Item Specifics
Return postage will be paid by: Buyer
Returns Accepted: Returns Accepted
After receiving the item, your buyer should cancel the purchase within: 30 days
Return policy details:
Brand: AFTERMARKET
Type: fuel filter set
Item Diameter (Exterior): 8.5 mm
Unit Type: Unit
Item Diameter (Interior): 7.0 mm
Manufacturer Part Number: Does Not Apply
Material: Plastic
Item Length: 38 mm
Intended Use: Replacement Part
Placement on Vehicle: petrol tap
Colour: Clear
