Forge Motorsport Induction Kit fits EA888 Gen 3 and 4 FMINDK44

Description: Pages About Us New In Stock View Feedback Visit Shop About Us Feedback Add To Favourites Contact Us We have the parts you need Forge Motorsport Induction Kit fits EA888 Gen 3 and 4 FMINDK44 View Motor Bling Feedback Product Description Highlights: Power gains of up to 13BHP (when paired with the appropriate turbo inlet adaptor) Torque gains of up to 17NM (when paired with the appropriate turbo inlet adaptor) Pleated or foam filter available Greater engine sound Made in the UK Lifetime guarantee With our in-house VW Golf MK8R development vehicle we have been able to complete thorough testing on the EA888 gen4 platform, from rolling roads to track time. This has allowed us to create FMINDK44, the second induction kit we have available for the EA888 gen 3 and gen 4 platform (alongside our carbon fibre variant, FMINDK40). This kit features either a Forge Motorsport Ram Air high flow, pleated, synthetic nanofiber filtration filter or a Pipercross foam filter. Both are manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 2.0 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. Please state which you prefer or either will be supplied The intake diameter has been carefully tuned to provide exactly the correct quantity of air for consistent power gains throughout the rev range and minimising the chance of low-end torque loss; the pipework is specifically designed to feed the turbo without interruption. The upshot to all of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the EA888 engine. With the use of SolidWorks, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. The majority of our dyno testing was done on our VW Golf R MK8 EA888 Gen 4, as such you may find slight variations in gains when fitted to other vehicles sharing this engine. During the final prototypes testing we found that the induction kit with stock turbo inlet produced gains on average of 3.5BHP. However, when paired with our turbo inlet adaptor FMTIA5 (RHD), FMTIA6, or FMTIA9 (LHD), or FMINLMK7, this is where the stock EA888 gen4 engine saw impressive gains, increasing power up to 13BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 8BHP; while the drivability and the punch from extra torque increases can be felt on the road at between 4000RPM to the rev limit an average gain of 17NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power. Why Do We Try To Decrease Inlet Air Temperatures (IAT’S)? By utilising the OEM cold air feed, and keeping the heat shield open on the headlight corner side we were able to see a decrease in IAT’s compared to the OEM during testing. By ensuring that the intake heat shield is open on this side it also means that vehicles being tuned to stage 2/3+ have a reduced risk of being restricted with them pulling in a greater quantity of air. Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance when tuning to stage1, stage 2 and beyond. Not only do you get the bhp performance benefits, but FMINDK44 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too. Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development has gone into this extraordinary performance induction kit. The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. The kit has been designed not just to increase power but to fit a whole range of vehicles on the MQB platform. This goes as far as to include cars using the OEM turbo elbow and the Forge Motorsport FMTIA5/FMTIA6/FMTIA9 high flow elbows. With FMTIA5/FMTIA6/FMTIA9 using multi ply silicone, it has minimal flex; however the OEM inlet hose uses an accordion rib design which could cause the filter to damage itself or the heat shield. Unlike our competitors, we have included a P-clip and tab on the back of the heat shield, allowing the OEM inlet hose to be secured to the heat shield, meaning no damage and no annoying rattles! Time taken to install – around 1 hour Compatibile Vehicles: Audi Q32.0 TSI (2015-2018) S32.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) SQ22.0TSI (2018-2021) TTSMk3 8S (2014-2021) Cupra AtecaVZ1, VZ2, VZ3, VZN 2021- FormentorVZ1, VZ2, VZ3 LeonVZ1, VZ2, VZ3 Seat Skoda Kodiaq2.0TSI (EA888 Gen 3) RS 2021- OctaviaVRS 2.0 TSI 2013 Onwards Superb280 4×4 DSG Volkswagen Arteon2.0 TSI Golf MK7GTI GTI Clubsport ED40 R MK7.5GTI R MK8Clubsport 45 GTI GTI S R Passat2.0 TSI (2015-2021) T-Roc2.0 2018-2021 Tiguan2.0 TSI 2017 Onwards R 2021 Onwards Touareg2.0 TSI (2018-2021) Engine Bay Products Browse Stock Dump Valves Browse Stock EBC Discs & Pads Browse Stock About Us We are a family run business started back in 2004 offering car customising and performance products from top brands such as Forge, K&N, Bailey, Wossner, Walbro, Gaz, The Loudest and many more. We also have products manufactured for ourselves and these are made to the highest standards. Buying from us means you buy directly from the importer, so are prices are always the best. Over the past 9 years here at Motorbling we have also expanded our product range into standard replacement parts such as Brakes Pads from EBC and Wing Mirrors from Lucas, so we can now offer everything you need, from customising, to performance to standard replacement parts for MOT'S and general repairs. We offer fantastic service and discounted prices so why shop anywhere else. All products are shipped with tracking and insurance, so in the event of loss or damage, your purchase is totally covered (simply e-mail us through eBay messages to let us know the item has arrived damaged or has not arrived) We will notify you by e-mail when the item has been shipped, so there is no need to contact us. If an item does not arrive within 7 days of receiving the despatch e-mail (please allow up to 14 days if buying from Europe or the Rest of The World) then feel free to contact us through eBay messages so we can assist you with this. Please remember when leaving feedback and seller star scores you are judging us on dispatch time and not the postal company used. Returns Policy 30 Days Returns Guarantee If we have made a mistake, please contact us so we can resolve the issue immediately. For most items, you have the right to return your goods within 30 days of receiving them. However, this right does not apply to items that have been altered upon request, have missing labels or show signs of being used. If you wish to return goods using this right, you need to inform us within 21 days of receiving the goods. You must take reasonable care of the goods and immediately return them at your own expense. Please ask for a "Proof of posting certificate" as we cannot be held responsible for goods that go missing whilst in transit. If you think we’ve sent you the wrong item or size, please double check the full description in the listing, including the UK size before requesting a return. If you have incorrectly ordered the wrong item we can exchange the item subject to stock availability, however additional postage charges will apply. To request a return please submit the request using the contact us form/ Site Returns process. Our returns address will be provided. To request an exchange please contact us through our contact page. Thank you. Have a Question? Get in touch! Add To Favourite Sellers Engine Bay Products Forged Pistons Fuel Hose & Fittings Remus Exhausts Power Boost Valves Visit Shop! 30 Days Returns Guarantee If we have made a mistake, please contact us so we can resolve the issue immediately. For most items, you have the right to return your goods within 30 days of receiving them. However, this right does not apply to items that have been altered upon request, have missing labels or show signs of being used. If you wish to return goods using this right, you need to inform us within 21 days of receiving the goods. You must take reasonable care of the goods and immediately return them at your own expense. Please ask for a "Proof of posting certificate" as we cannot be held responsible for goods that go missing whilst in transit. If you think we’ve sent you the wrong item or size, please double check the full description in the listing, including the UK size before reque

Price: 437.93 USD

Location: Stowmarket

End Time: 2025-01-01T19:21:00.000Z

Shipping Cost: 119.4 USD