Fits Saab A269ZUA111 88056FE000 OEM 2 Button Key Fob

Description: Item Details This is a Factory OEM (Original Equipment Manufacturer) BMW | Saab | Subaru 2 Button keyless entry remote, aka "key fob". Factory OEM key fob remote in a new aftermarket case. Compatibility BMW | Saab | Subaru 2006-2007 Saab 9-3 2005-2006 Saab 9-2X 2002-2006 Subaru Baja 1999-2004 Subaru Forester 1999-2004 Subaru Impreza 1999-2004 Subaru Legacy 2000-2004 Subaru Outback 1996-2000 BMW Z3 Programming Saab and BMW - Must be programmed by a professional automotive locksmith or dealership. Programming for Subaru: 03-06 Baja, 01-04 Impreza, 01-04 Forester, 99-04 Legacy, 00-04 OutbackObtain all remote transmitters for this vehicle.1. Sit in the vehicle in the drivers seat with all doors, trunk, and rear gate closed.2. Open and close the drivers door.3. Put key into ignition switch. Cycle ignition switch from OFF to ON (ON is the position just before the engine cranks) ten times as quick as can be done ending up in the lock position. This must be done within 15 seconds. When done properly you will hear the horn sound. Now the vehicle is in programming mode.4. Open and close the drivers door.5. Press any button on the first remote. The horn will sound two times to indicate that remote was accepted.6. Repeat steps 4 and 5 for each additional remote that you wish to program to vehicle.7. Remove the key from the ignition switch. Horn will sound three times to indicate that vehicle is out of programming mode. Test all programmed remotes for proper function. Programming for Subaru: 2000 ImprezaObtain all remote transmitters for this vehicle.1. Open the driver's door.2. Turn the ignition key ON (ON is the position just shy of cranking the engine).3. Press and hold the programming/override button (located under or at the bottom of the driver's side dash). In approximately 20 seconds the system will start to cycle the door locks and the siren (if equipped) 3 times to indicate the system has entered the transmitter learn mode (DO NOT RELEASE THE PROGRAMMING/OVERRIDE BUTTON).4. Press the #1 button (top left button) on the un-programmed transmitter. The system will respond by cycling the door locks and the siren (if equipped) one time to indicate the transmitter has been learned.5. All other transmitters (up to four) also need to be programmed at this time.6. Programming is now complete, let go of the programming/override button and turn ignition off to exit learn mode. Test all remotes for proper programming. Item Specifics FCC ID: A269ZUA111 Part Number: 88056FE000 Interchange Part Number(s): 700 101 672 Before You Purchase OEM Key Fobs: We are proud to offer true OEM key fobs direct to you at up to 80% off dealer prices. There is a catch though, so here it goes: You need to know the only way to get a NEW OEM key fob is to go to a dealer or authorized reseller of OEM parts, and you will pay dealer prices if you do this and spend hundreds of dollars. Our Products: The key fob you are going to purchase from us is used or as we like to say "previously loved". We recycle OEM key fobs and put them through a rigorous refurbishing process so we can guarantee our products and offer them at a reasonable price along with saving the environment. Oh, and we are not robbing you of your hard earned dollars like the stealership does. So if you are good with all of this what are you waiting for? Make your life easier, order a key fob from us and save the world!

Price: 36.77 USD

Location: Omaha, Nebraska

End Time: 2024-11-27T14:54:08.000Z

Shipping Cost: 0 USD