Description: Stillen Hi-Flow Ultra Long Dual Tube Air Intake System Gen 3 - Oiled Filter Part Number: 402852 This item fits: 2009-2020 Nissan 370Z (See Compatibility Chart) Features: Ultra Long Twin Mandrel Bent Polished Aluminum Intake Tubes. High Quality Washable Oiled Filter. Installation Requires Mild Enlarging of Core Support. Fits NISMO models with slight modification. Includes Detailed Installation Instructions (Nismo Modification Instructions Not Included). 17.5 WHP / 13WTQ Gain At The Wheels (No Tune Necessary!)* *Results May Vary! Improved power & response across entire rev range. Built To Last - Designed And Manufactured in U.S.A. Improved Airflow & More Efficient Filter Media enhances mileage per gallon (MPG). 50 State Legal, Emissions Compliant! CARB Approved! EO# D-436-22. Enhanced Airflow and Reduced Restriction Offers Amazing Engine Tone. Larger surface area air filters enhance response by removing restrictions Streamlined Mandrel-Bent Tubing Routes Cool Air Directly to Intake Manifold Simple Installation - Can be Installed in your driveway No tuning required - Runs fine on factory tune, no CEL! Limited Lifetime Warranty. Increase engine performance with the STILLEN Air Intake for Nissan 370Z Z34. The GEN 3 features the most optimal horsepower and torque gains. This STILLEN Nissan 370Z Air Intake has a polished finish. This Z34 370Z intake provides a better air flow to the engine with the smooth surface tubing construction. STILLEN was the first national performance tuner to introduce a high flow cold air intake for the Nissan Z34 and Infiniti VQ37 equipped cars. Our first cold air high flow air intake system offered a small gain in power accompanied by great sound enhancement. Economical and easily installed, our original Gen 1 Cold Air Intake was an instant hit with the Z community. Not long after, we introduced our Gen 2 Long Tube Intake. It improved on the Gen 1 unit with polished tubes, even better sound and a bump in power. It also quickly became one of our best-selling air intake kits. However, the power output was still lower than we knew we could pull out of the VQ37HR. The haters and doubters insisted "you can't make power with an intake on the VQ35HR/VQ37HR!"... so, we set out to prove them wrong, and build the best darn intake for the 370Z the world had ever seen. This led us to the development of our Generation 3 Ultra Long Tube Cold Air Intake Kit for the Nissan 370Z. At STILLEN, all our products are both designed and manufactured right here, in house in Costa Mesa, CA, which gives us the ability to test numerous configurations and fine tune our designs until we achieve the desired results. When you take that into account as well as our extensive, Championship-Winning experience racing, you understand why STILLEN was able to succeed where others failed. Our R&D team engineered and dyno tested more than 50 variations before settling on this design as the best solution available for the VQ37HR engine. The Gen 3 intake has a radically updated design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles - as a matter of fact, the kind of power we were able to pull out of the HR-series VQ engines is unheard of among performance intakes for non-turbo/non-SC'd cars. We altered the intake layout quite a bit- our Gen III Long Tube Cold Air Intake for 370Z features an integrated system of variable diameter tubing and steps to maximize air velocity, including additional internally polished tubes that pass through the front core support for superior airflow and as few 'turns' as possible in the intake tract between the filters and throttle. The new Ultra Long Tube Cold Air Intake strategically places two large AEM filters ahead of the radiator, exposing them to the coldest-possible incoming air while also making the filters still easy to service. The end result: A dyno-proven 17.5 Horsepower (WHP) and 13 ft/lb (WTQ) gain* on the 370Z - This translates to an estimated 20-22 horsepower gain at the flywheel. Again, let us emphasize here, this is on the STOCK ECU TUNE. No other cold air intake for the VQ can match these power gains - PERIOD. *Results May Vary! Recommended installation requires removal of the front fascia clip and slightly enlarging the holes through the front core support. You CAN install this intake system without removing the bumper, but this makes your install harder than it has to be - take our word for it, it's easier to remove the bumper. It's worth saying that removing your front bumper doesn't require a master body technician - it's actually pretty simple. Just basic hand tools and a 'panel popper' (plastic retainer remover) are all you'll need to drop the bumper. Pro-Tip: Set your bumper on a soft blanket or the grass or something soft to prevent scratches while working. Of course, if you're not comfortable with installation, professional installation is recommended if you're unsure of your ability to install this intake. This item is BRAND NEW in a factory sealed box. We ship all domestic orders via Ground. All orders being shipped to Canada or to International destinations are sent via the eBay Global Shipping system. Please use the drop down box in the Shipping and Handling box to find out the actual shipping charge to your area by Zip Code or Postal Code.====================================================================== Terms, Conditions and Payments - By clicking the "Buy It Now" button, you are entered into a legally binding contract to purchase the item. If by the 4th day after a purchase has been we have not received your payment a case will automatically be opened in the Resolution Center to recover our selling fee. This can typically result in a strike on your eBay account as well as possible restrictions. We suggest you get in contact with us as soon as possible if you have made an error in purchasing an item so that it can be resolved without any negative consequences to your eBay account. For shipping and handling rates, please check the SHIPPING AND PAYMENT tab above. We will only ship to a Confirmed address. eCHECK payments will be processed once the payment has cleared. Per the eBay and PayPal Seller Protection programs we have to ship the order to the address that was provided to us with your PayPal payment. We only use our shipping accounts for shipping orders. Please do not ask to have an order shipped on your account. Depending on the item orders the shipping time will vary. Please check under the Shipping and Payment tab above for the shipping time for this particular item. All orders being delivered within the state of California are charged sales tax. Import duties, taxes and charges are not included in the item price or shipping charges of international orders. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior. We are in the office Monday – Friday 9:00AM to 5:00PM Pacific Time (not including Holidays). Our corporate office is located in Irvine, CA. but we do not have a store or warehouse for items to be looked at or picked up from. Return Policy - You must contact us for a return number (RMA) before returning an item.Be sure to package the item(s) being returned well to protect from shipping damage (we also recommend adding shipping insurance on the package with the shipping company you choose to send the package back with).If the item is received back and is not in the original box and/or packaging or is damaged due to you not packaging and protecting the item(s) NO CREDIT WILL BE ISSUED.Any labor, installation, and/or shipping costs are not refundable.It is the purchaser’s responsibility to pay for any/all shipping charges to return an item(s).All returns are charged an industry standard 20% restocking fee.Item must be in new condition and resalable.Installed or modified parts cannot be returned, if the item(s) being returned is found to be installed or modified no refund will be issued. Warranty – JW Custom Accessories makes no warranty of the parts that are distributed by us, expressed or implied, including, without limitation, any warranties of merchantability and fitness for a particular purpose. All products that we sell come with a warranty that is backed by the manufacturer of the product being sold; the warranty policy will be included with the product.
Price: 589.99 USD
Location: Costa Mesa, California
End Time: 2024-08-15T14:35:00.000Z
Shipping Cost: 30 USD
Product Images
Item Specifics
Restocking Fee: 20%
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Manufacturer Warranty: Lifetime
California Prop 65 Warning: This product contains chemicals known state of California to cause cancer and birth defects or reproductive harm. For more information go to https://www.p65warnings.ca.gov/
Vintage Part: No
Performance Part: Yes
Country/Region of Manufacture: United States
Universal Fitment: No
Manufacturer Part Number: 402852
Brand: Stillen
