Evans Power Cool 180 Waterless Engine Coolant Antifreeze for Performance Cars

Description: Application For high performance engines fabricated from a mixture of cast iron, copper, steel and aluminium components Typical Characteristics Physical State : Low Viscosity Synthetic Liquid Boiling Point : Above 180°C Freezing Point : Below -40°C Colour : Red Clear Odour : Almost odourless Taste : Slightly Sweet, Non-Toxic but not recommended for human consumption ASTM & ISO Standards Evans in association with ASTM committee D15.22 have developed a specific range of standards for waterless engine coolants. All Evans Coolants are manufactured in accordance with certified ISO procedural standards. Prep Fluid Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only. Evans prep fluid is used to : Hygroscopically absorbs water Ensures all residual water is removed from the system Ensures that Evans coolants will meet the water content limits and provide peak performance Additional products within the Evans product range include... 2L and 5L Listings Link Here 25L Listings Link Here Power Cool 180° contains no water eliminating the problems caused by water based coolants, increasing reliability and extending engine life. Evans in association with ASTM committee D15.22 have developed a specific range of standards for waterless engine coolants. All Evans Coolants are manufactured in accordance with certified ISO procedural standards. Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush

Price: 27 USD

Location: Royston

End Time: 2024-08-27T19:34:51.000Z

Shipping Cost: 49.78 USD