Electric Water Pump - EWP150 (ALLOY) Combo (12V) (Davies Craig) (Part #8970)

Description: Stores - 999automotive - Storesyou are buying Electric Water Pump - EWP150 (ALLOY) Combo (12V) (Davies Craig) (Part #8970)MESSAGE TO CUSTOMERS **EXTRA SHIPPING FEE MAY APPLY ON ORDER TO NORTH QLD, NT, SA, TAS & WA** **SOME PICTURES ARE FOR BRAND IMAGE / REFERENCE ONLY! BUYER WILL RECEIVED THE ITEM / PART NUMBERs WE LISTED** **SOME Universal PRODUCTS / application. Additional parts MAY be needed to complete install. Please consult professional installer for details** **SOME PRODUCTS ARE MADE TO ORDER OR BACK ORDER ONLY, WE WILL CONTACT BUYER FOR MORE DETAILS** **SOME ITEM MAY BE SENT FROM OVERSEA WAREHOUSE or MADE TO ORDER in AUSTRALIA IF OUT OF STOCK IN AUSTRALIA** **PLEASE ALLOW 5-8 WORKING DAYS HANDLING + 4-6 DAYS SHIPPING TIME** **SOME PART NUMBER WOULD NEED UP TO 2 WEEKS ETA** **SOME PRODUCTS ARE DESIGNED FOR RACE USE ONLY - NOT RECOMMENDED FOR STREET USE** **Professional installation is highly recommended (No Instruction Included). Any damage during installation will not be refunded**Electric Water Pump - EWP150 (ALLOY) Combo (12V) (Davies Craig) (Part #8970)Muscle up your engine cooling system with the Davies Craig EWP® 150 alloy Electric Water Pump and the LCD EWP®/Fan Digital Controller.Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat & intercooler applications. COMBO CONTENTSPART DESCRPTIONUNITSEWP150 Alloy1EWP/Fan Digital Controller & Mounting Plate + Bracket1Sensor Thermal - coolant temp - ¼" NPT thread1Adaptor - Nylon - In Line, 38mm (2 x 1/4" NPT)11/4" NPT Nylon - Bung1Wiring Harness1Hose Clamps4SCREW - SELF TAP 8X3/8 BZ1BLUE 6mm Ring Terminal1 TECHNICAL SPECIFICATIONSEWP150 - ELECTRIC WATER PUMP LCD CONTROLLEROperating voltage3V DC to 15V DCVoltage range12V DC to 29V DC Maximum current10A @ 13VDisplay LCD size64.6mm (2.54”) x 55.6mm (2.19”)Flow rate (max)150L/min (39.63 US gal/min) @ 13V DCMaximum current12AmpsOperating temp.-40° to 130°C (-40° to 266°F)Warning alarmHigh & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuitPump designClockwise centrifugal with volute chamberTargeted (set) temperaturesSingular degrees from:40°C (104°F)to 110°C (230°F)Pump weight1,170 grams (2.6 lb)MemorySet & targeted temperaturePump materialAluminium (Powder Coated)Fan cut-in temp.3°C (5.4°F) above the targeted (set) temperatureBurst pressure500 kPa (72.5 psi)Controller typePCB with micro-processorSealCeramic face sealSensor typeThermister in housingSelf PrimingNo, none of our pumps are self-primingFits hose size35mm to 51mm (1.38” to 2”)Overrun/ shutdown-10°C (14°F) below set/target temperature or 3 minutesIndicatorsTemperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)Internal Thread -Inlet & Outlet: -16AN (12)Weight100 grams (3.5 oz)Push-On fitting SizeEWP Inlet & Outlet 38mmwith 3mm Sleeve (#8510) 44mmwith 6mm Sleeve (#8511) 51mmDimensionsLength = 98mm (3.8")Width = 95mm (3.7")Depth = 25mm (1”) The compact EWP®150 alloy unit is manufactured with AN-16 internal inlet and outlet threads for neat, tight screw-in fitting applications. This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance part increases power to your vehicle’s drive wheels and improves coolant temperature control.The EWP®150 is a universal, do-it-yourself, easy installation fitment to engines up to seven litres. By removing the parasitic power losses of belt-driven water pumps, the EWP®150 releases up to 10kW (13hp) of extra power, increased torque and fuel savings. Combine it with the LCD EWP®/Fan Digital Controller and the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life.The EWP®150 and LCD EWP®/Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.LCD EWP & FAN DIGITAL CONTROLLER - 12 & 24 VOLTThis LCD EWP® / Fan Digital Controller (Part #8002) is Australian designed and as part of this Australian manufacturing company’s continuous improvement program this advanced Digital Controller boasts a suite of enhancements. The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP® by varying the speed of the EWP® in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 40°C (104°F)to 110°C (230°F).Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP® to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.FeaturesBlack & White Numerical ScreenCelsius or Fahrenheit display optionWarning Alarms: - Plus 10°C (14°F) set/target temperature- Under temp 40°C after 5 mins- Temp sensor error- Over or under voltage- EWP errorSelect any set temp range from 40°C (104°F)to 110°C (230°F)Set / targeted temperature memoryOverride feature to assist bleeding EWP & fail safeInput voltage displayCompatible with billeted style Electric Water PumpsEWP® INSTALLATION OPTIONSInstalling an EWP® as an AUXILIARY PUMPLeaving the mechanical water pump in place, install the EWP® into the bottom radiator hose.Remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation when the thermostat is closed. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.EWP® INSTALLATION – disabling Mechanical water pumpLeaving the mechanical water pump in place, install the EWP® into the bottom radiator hose and remove the manufacturer’s thermostat.You will need to bypass the water pump pulley by installing an appropriate length belt (not supplied). This method makes for an easy installation.If running the pump continuously remove the thermostat and drill two approx. 3mm (1/8") holes in the thermostat plate to allow some coolant circulation. Re-install ensuring that the thermostat housing is clean and a new gasket is used if required.In both these cases, the EWP® will pump past the impeller of the mechanical water pump.Disengaged mechanical water pump (recommended)Remove the mechanical water pump and remove the thermostat.Then remove the impeller from the mechanical pump shaft. Retain the mechanical water pump using the pump pulley as an idler to avoid re-routing the drive belt.Block any bypass passages and re-install the disengaged water pump ensuring that all gasket surfaces are clean and the new gaskets are properly fitted to prevent leaks.Install the EWP® into the bottom radiator hose.Removed mechanical water pump (Ideal)Remove the mechanical water pump and thermostat from the engine.Install a Davies Craig EWP® Header Adaptor or blanking plate (not supplied). Ensuring the gasket surfaces are clean and the appropriate gasket or sealant is used to prevent leaks.Install the EWP® into the bottom radiator hose. This method will require you to modify or replace the standard radiator hose.Install an appropriate length belt (not supplied) to drive the accessories.In most cases EWP® will be adequately supported by the radiator hose. Where mounting is required, the EWP® must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended. ABOUT US Triple Nine Automotive (999Automotive) was established in 2003 with the goal of providing customers a one stop place for all their vehicle needs. With more than 2000 performance products in our warehouse, we are proud to say that we will be able to cater to your requirements. At the workshop, our mechanics are trained from standard mechanical repairs to performance modifications, including suspension upgrades and a skilled in-house fabricator for your custom requirements. Equipped with a 4WD dynamometer from Dyno Dynamics, 999 Automotive provides aftermarket ECU tuning along with our customers being able to find out how much power their car produces in ShootOut mode. Our aim is to make our customers' cars reliable, we want our customers to enjoy the fun of the modifications we perform to their cars. Therefore, the power figure is not the only thing we are concern about. We care for all the modifications that make your car run smooth. In addition, we offer car enthusiasts our technical experience and expertise as well as the ability to diagnose and rectify any mechanical problems of your car to perform better or run more cost efficient. Our showroom displays a wide range of products for both interior and exterior upgrades from appearance to performance. OUR STORES Below Are Our Policy and Product Warning/Disclaimer, Please Read Before Buying: • All PERFORMANCE IMPORTED products and products listed in this ONLINE store are for Off Road Racing or Track Racing Use Only, NOT for Street use. • WE DO NOT recommend or support any Road/Street Usage of these products, nor liable for any issues might result from such usage of these products on Road/Street condition. • Any Modifications to your vehicle Are AT YOUR OWN RISK. • You Should Also Contact Your Car's Manufacturer to Determine What Effects Modifications May Have on Your Safety, and Vehicle Warranty for installing these aftermarket products. • Under ANY circumstances, 999AUTO's maximum liability is limited to the purchase price of the products sold. 999AUTO shall NOT, UNDER ANY CIRCUMSTANCES, be liable upon a claim or action in contract, tort, indemnity or contribution, or other claims relating to the products it sells which exceeds this liability limit. 999AUTO shall NOT be liable for third party claims for damages against the customer, or for malfunction, delays, interruption of services, loss of business, loss or damage to exemplary damages, whether or not 999AUTO is apprised of the possibility of such claims of damage. • No warranty is expressed for all IMPORTED PERFORMANCE Products. • You agree to the policy and terms stated on this listing by buying or bidding on this item. Please Do NOT buy or bid if you disagree with our policy and terms.Online Team - 999Automotive

Price: 389.67 AUD

Location: Lidcombe, NSW

End Time: 2024-02-16T11:37:11.000Z

Shipping Cost: 238 AUD