Eastwood HotCoat PCS-250 Powder Coating Gun and Benchtop Booth Powdercoating Kit

Description: The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating System gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. Easy To Apply and Provides Extremely Durable Finish Economical - Quick Color Changes - Coat and Cure In Under An Hour! Operates on Standard 120v / 60Hz Household Current Versatility with two settings for improved coverage Low 15,000-Volt Setting and High 25,000-Volt Setting For Multi-Coat Coverage Over Larger Areas Increased Powder Adhesion and Minimal Overspray The Hotcoat Benchtop Powder Booth is a simple but effective conversion kit that transforms a 20 inch box fan into a booth for powder coating. Captures Over 95% of Powder Overspray Compact Size and Easy to Assemble Uses Your Standard 20 Inch Box Fan Perfect For Powder Coating in a Garage or Small Shop Includes Rods For Hanging Parts The Eastwood Hotcoat Filter Tack Spray transforms pleated fiberglass HVAC filters into a powder coat "trap" capturing and eliminating 99% of overspray in your shop. The Filter Tack Spray is a environmentally-friendly, non toxic coating that treats 10 standard 20" x 20" x 1" filters. Eastwood HotCoat® PCS-250 Powder Coating System Specifications 15KV/25KV dual voltage output New and improved ground clamp provides a better ground Color coordinated cabling for easier setup New clear bottle makes it easy to see powder level and fluidizing action Additional 1/2" of trigger room makes it easier and more comfortable to use Eastwood HotCoat® BenchTop Powder Coating Booth Kit Specicfications Box Fan Size: 20" (Commonly available at Walmart or Home Depot) Air Filter Size: 20" x 20" x 1" HVAC/furnace air filter, pleated, fiberglass type only. MERV rating not impactful. Frame Construction: 18 gauge (1.2mm) steel, black powder coat Contents (1) 33278 Eastwood Hotcoat PCS-250 Dual Voltage Powder Coating System (1) 70016 HotCoat BenchTop Powdercoating Booth (1) 72054 HotCoat 20x20x1 Powder Booth Filter (1) 69481Z HotCoat Filter Tack Spray Box Fan is not included

Price: 249.99 USD

Location: Pottstown, Pennsylvania

End Time: 2024-12-17T13:52:42.000Z

Shipping Cost: 0 USD