Description: PLEASE READ COMPLETELY BEFORE PURCHASING DIGI-TAILS / LED Tail Light Conversion Kit 1965 GM A Body / Buick GS Gran Sport (view Images on the listing to ensure fitment for other Buick Models) This listing is 'Made to Order' and ships directly from the manufacturer (view images for current lead time) NOTES:1) First Image on the listing is only for reference use only (must reuse your factory lenses and housing) 2) Please Review 2nd Image for Current Lead and Handling Time for this Listing3) Please Read and Review "Important Notice" Below in this Listing before purchasing4) Contact me anytime if you have any questions or concerns //////////////////////////////////////////////////////////////////////////////////////////////////// Make & Model Fitment: 1965 Buick GS Grand Sport1965 Buick Skylark Manufacturer: DIGI-TAILS by Spaghetti Engineering Category: Exterior, Tail Lights Location: Rear Tail Light Conversion (must reuse your factory housing & lenses, not included) Manufacturer Part #: 1101165 (sold in pairs, one driver side & one passenger side) Number of LEDs: 120 Red per Side (40 Red inner panel, 40 Red center panel & 40 Red outer panel) Color of LEDs: Each LED is the color of use. Front Marker will have Amber LED's Tail Light will have RED LED'sReverse Light will have White LED's Color of Panel: Color of panels may be Green, Red or White, depending on the generation series of the kit(contact me if you have any questions or concerns) Sequential Functions: (switchable between standard lighting and sequential feature) > Brake: Inside to Outside > Turn Signal: Inside to Outside Reverse Panel: No Reverse Panel with this kit What's in the box:> 6 LED Panels> 6 Rubber Grommets > 1 Power Wire> 3 Pigtail Harness> 3 Crimp Terminals Kits > Instructions (contact me for the most updated free PDF file) Spec Notes: > An Electronic LED flasher is highly recommended for use with DIGI-TAILS digital Tail Lights, but not necessary > If you are installing both LED tail lights and LED Front Markers, two electronic LED flashers are required > Housing and lenses are not included, however, DIGI-TAILS kits are designed to fit your existing housing and lenses perfectly. Message from DIGI-TAILS to you (the customers)... Safer & Brighter: > DIGI-TAILS kits are safer and brighter than standard factory lights or other LED kits because our light-panels contain high-intensity wide-angled LEDs that are strategically positioned to maximize light output and fully optimize your lenses Sequential or Non-Sequential: > DIGI-TAILS is the only fully sequential LED kit. We utilize advanced technology by lighting LED's in a fluid sweeping pattern, rather than merely lighting up blocks of LEDs >DIGI-TAILS allows you to choose standard operations or our fully sequential feature with a flip of a switch, conveniently located on every board Easy Installation & Precision Fit: > DIGI-TAILS have been custom engineered kits to fit your housing precisely, rather than using generic light-panels. Out care in design gives you easy installation and exceptional appearance > DIGI-TAILS pigtail kits come complete with everything needed to replace your old standard bulbs with high quality LED lighting; clear instructions are included Durable & Long-Lasting: > DIGI-TAILS are designed and manufactured for durability and unsurpassed quality here in the West Berlin, NJ - USA > DIGI-TAILS meets or exceeds DOT & SAE requirements. Each light-panel has protective coating to prevent rusting and corrosion. Limited Life-Time Warranty included. There is nothing like DIGI-TAILS on the street, making DIGI-TAILS one of your most satisfying upgrades ever. Contact Me: If you have questions about DIG-TAILS products. If DIGI-TAILS makes it, I can get it for you Important Notice: By purchasing this DIGI-TAILS product(s), buyer has agreed to the following return policy 1) The product(s) must be in new and unaltered condition (original packaging and NEW Condition) 2) Customer agrees to a 20% restocking fee (product cost only. shipping cost excluded on restocking fee) 3) Original shipping charges are non-refundable 4) Refunds are issued only after product(s) is returned and pass inspection 5) Product(s) with any manufacturer's defects, contact me immediately (any alternation are not returnable) 6) Test all the LED light-panels before affixing the LED panels permanently to any housings or lenses //////////////////////////////////////////////////////////////////////////////////////////////////// Feel free to contact me if you have any questions Follow me on Instagram & Facebook@ClassictoModernMuscleCars The following shipping service is available in the United States(Yes, this includes: Hawai'i, Alaska, Puerto Rico & All U.S. Territories) Shipping and Handling on this Listing> > > USPS Priority < < < USPS Tracking is provided with all packages on this listing. Tracking updates are also on the USPS Website, this will include the date and time of delivery or attempted delivery We DO ship to USPS PO Boxes on this Listing Please make payment within 7 days after your purchase. If payment is not received after the 7 days from the date of purchase. I will need to report this to eBay as an unpaid item. I CAN NOT combine shipping on this listing //////////////////////////////////////////////////////////////////////////////////////////////////// Warranty - Returns - Refund Policies... Manufacturer's Warranty... Please Read Completely & Carefully. By purchasing any item from this seller (Classic to Modern Muscle Cars, LLC) you have affectedly accepted all terms & conditions, Warranty & Return policies Above and Below on this listing. All good are covered by their manufacturer's warranty. Classic to Modern Muscle Cars, LLC DOES NOT sell or offer warranty on any goods other than the manufacturer's warranty. All warranty claims must be made before the parts are installed. Due to the nature of their use, race parts are not covered by warranty once they have been used. When it has been determined the part(s) is defective, we will either replace or send you a refund. No refund will be given on shipping charges, installations and/or removal of the parts. Due to the fact that there are many variables when installing auto parts. Classic to Modern Muscle Cars, LLC will not be held liable or responsible for any consequential and/or incidental damages and/or injuries incurred during product(s) installations and will not be held liable or responsible for any charges on any product that are defective, does not fit, are damaged and/or ordered/shipped incorrectly. At some point, you may have product(s) that needs to be returned. It may be an item you do not need, or it may be something you bought in error or damage goods. In any event, you want to return the product for credit. We routinely process several returns every day. To insure that the product(s) get quickly processed and credited, please follow the following steps below. We will be happy to make sure your returns are properly credited. Return Instruction (please read completely): 1) Contact us before returning any product to us or the manufacturer. Request RGA (Returned Goods Authorization) number for the product(s) you wish to return. All product(s) to be returned must be accompanied by a RGA number and be in its original packaging. The product(s) must be unused, unaltered and unchanged from its original state. Any product(s) returned that DOES NOT meet this criteria (failed return inspection) may be subjected to additional handling fees or refusal. The product must return in a re-saleable condition (as new, not used condition). If product(s) fails return inspection, refund will be denied. This product(s) is yours and you will need to pay additional shipping cost to be returned to you again. Any product(s) left abandon for 30 days after a failed returned inspection will be discarded. If you are unsure if the product(s) will not pass or fail return inspection. Contact us and send us images to help you will the return process. 2) Pack the product(s) carefully to avoid any damages during shipping. Always use a sturdy shipping carton to ship the product(s) back. Print your RGA number on the outside of the shipping carton. Please DO NOT write on, use tape and/or affix shipping labels to the product(s) packages itself, product(s) must returned to stock and we can not sell product with a defaced packaging. Return shipping fees are at the customer's expense and no refund on shipping cost to and from the customer. 3) You will need to send me the invoice number or better yet, a copy of the original invoice showing when the product(s) was purchased. Please include this information with the merchandise you are returning. Returns will be assessed a 20% Restocking Fee for DIGI-TAILS product(s) (depending on the manufacturer restocking fees may vary, contact me for more details on each manufacturer's restocking fees). We are very sorry, but we CAN NOT accept returns on special orders and/or non-stocking product(s) and/or wheels that had tires mounted. Please inspect your package(s)... Inspect your package for any damages and/or missing product(s). Please inform delivery drive and contact me IMMEDIATELY if any product(s) are damage due to shipping. Any damage product(s) from shipping and/or manufacturers defect will not incur any fees to the customer. All refusals of shipment will have a $25.00 handling charge and all applicable freight/shipping and 20% restocking fees will be charged to the customer. Shipping... Purchases made with customer's error and/or remorse on product(s) stating "FREE SHIPPING" and is returned (must past return inspection) will receive a partial refund minus of any and all shipping cost to and from the customer. If the product(s) DOES NOT past inspection, please review "Return Instruction number 1 (one)" return rule above. The product(s) must b return in re-saleable condition (as new. not used condition). If product(s) fails return inspection, refunds will be denied. This product(s) is yours and you will need to pay additional shipping cost to be returned to you again. Any product(s) left for 30 days after a failed returned inspection will be discarded. If you are unsure if the product will not pass or fail return inspection. Contact us and send us images to help you will the return process. I may, at any time and at my sole discretion, modify these Terms and Conditions of use. Including our private policy with or without notice to the user. Any such modifications will be effective upon public posting. Your continued use of my services and this store following any modification constitutes your acceptance of these modified terms. I use all three major shipping companies here in the United States. FedEx, UPS and USPS. Not all product(s) can use just one shipping method due to size, weight and/or origin of the product. Product(s) may be dropped shipped from overseas location. I am located in Southern New Hampshire in the New England. Just over an hour North-West of Boston, MA. I do not have a location open to the public as of yet. Manufacturer's Defects... Unfortunately as much as each manufacturer does everything they can to bring you the best product(s) they can offer, manufacturer's defects does happen. We all hope those parts will never find their way onto our projects. But when they do, what to do if one of these defects find it's way to you. While those parts will be replace, there is a process. Since I do not offer warranty other than the manufacturer's warranty. Each manufacturer has a specific way on how they process defect exchanges. Each manufacturer's defect case is handle uniquely to each case. As much as we try to streamline it. Sometimes this does not goes as plan. Please try to follow and understand the next few steps to insure the defective product(s) is exchanged as smoothly as possible. 1) If you have manufacturer's defect product(s), please document the defect by taking pictures and/or video and/or taking notes. 2) Contact us with the issue/defect and try your best to explain the defect as soon as possible. Also send pictures, video and/or notes you have taken. 3) Not every return/exchange needs to have a case open (cases are mostly for when you have no communication between the buyer and seller) 4) I will need to bring this defects to the manufacturer's attention. This may take from moments to a day or two for the manufacturer to reply to the claim of 'Manufacturer's Defect'. Each manufacturer has an investigation process, It can only go as fast as manufacturer process these claims. 5) I will communicated with you on each step the manufacturer brings to my attention. Sometimes this may take a few message from me to the buyer and/or a few messages from me to the manufacturer. While some manufacturers prefer you to contact them directly with defect claims, other manufacturers prefer you work with the retailer you purchase your product(s) with. 6) If you choose to work directly with the manufacturer with your claim. I can not be held liable or responsible with the manufacturer's actions or conclusions of your claim(s) since I have been taken out of the loop of communication. You will need to complete the entire claim with the manufacturer. The steps above are just a few guides to help with exchanging or returning of a manufacturer's defects. Not all manufacturer process cases the same, the process can go very smoothly while other may not. Your patience will be very grateful. I take pride... I take pride in my company and will work with each customer and your individual needs. I understand each customer is looking for the right product(s) for their ride. And I want to make this happen. Is important to me everyone is happy with their purchase and it is why the rules and policies are set to protect us both. Please if you have any questions and/or concerns. Do not hesitate to contact me anytime and I will do everything I can to make sure you receive what your are looking for. Please take your time on large purchases. You work very hard for your money. Copyright © 2020 by Classic to Modern Muscle Cars, LLC (Limited Liability Company) Published 2020 of January 1st @ 0001 EST (12:01 am) - Updated 2020 December 31st @0001 EST (12:01 am)
Price: 229 USD
Location: West Berlin, New Jersey
End Time: 2024-01-08T03:38:11.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Certifications: DOT, SAE
Custom Bundle: No
Fitment Type: Performance/Custom
Manufacturer Part Number: 1101165
Mounting Hardware Included: Yes
Modified Item: Yes
Placement on Vehicle: Rear
California Prop 65 Warning: To California Customers This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Brand: DIGI-TAILS by Spaghetti Engineering
Returns Accepted Read Description: Returns Accepted Read Description for more Details
Manufacturer Warranty: Manufacturer Limited Lifetime
Housing Color: Must Reuse Factory Lenses & Housing
Lens Color: Red
Country/Region of Manufacture: United States
Lighting Technology: LED
