Description: Very clean unit in *like new* condition showing only minimal if any signs of use, I struggle to find any blemishes at all. Purchased from an older gentleman in his 60's who was the original owner. Every item I've ever purchased from this man has been in pristine condition, functioning as if new. Unit has been professionally refurbished, and factory reset; it's been gone through inside and out. Every component and function has been tested in-house and was found to perform without flaw, as intended, like new. I've sold nearly 100 receivers alone, over the last 10 years on ebay, electronics are one of my specialties. YOU will not be disappointed with this unit. The receiver comes exactly as shown in photographs. The original OEM Denon RC-978 remote is included; as well as a condensed reprint manual, an AM loop antenna, and the AV cables shown. DENON AVR-1906 Receiver: The AVR-1906 not only delivers great home theater sound, but also offers plenty of convenience features that make your entertainment system easy to use and enjoy. Denon's acclaimed high-current amplification drives up to 7 home theater speakers with power and precision. And thanks to a wealth of built-in surround decoding options, you can enjoy high-impact surround sound from virtually all of your movies, music, TV shows, and video games. The handy Auto Setup feature makes it a snap to optimize your system's performance based on your specific room and speakers. Just plug in the included microphone and place it in your favorite listening seat the '1906 takes care of the rest, adjusting the level and delay settings for every speaker in your home theater. Component video conversion provides easier TV hookup and simpler switching between sources. All video signals can be passed from the '1906 to your TV via a single component video connection. That means you can switch from your cable box to your DVD player with the press of a single button on this receiver's remote no more fumbling through input menus on your TV. Component video conversion also preserves the highest possible picture quality for each source. For streamlined control of every component in your system, even in low lighting, you get a multibrand remote with glow-in-the-dark keys. An icon-based display appears on your TV screen, providing easy navigation of the '1906's control menus. And dual-room/dual-source capability lets you enjoy home theater in your main room while a housemate listens to music in another room this receiver can even power stereo speakers in your second room. PRODUCT HIGHLIGHTS: 85 watts x 7 into 8 ohms (20-20,000 Hz) at 0.08% THD Dolby Digital EX, DTS-ES, DTS 96/24, Dolby Pro Logic IIx, and DTS Neo:6 processing 192kHz/24-bit DACs dual-room/dual-source output (powered and fixed line-level stereo audio output for 2nd room; using powered 2nd-room output allows 5.1 home theater in main room) Auto Setup component video conversion on-screen display multibrand remote with glow-in-the-dark keys digital inputs: 3 optical (including one front-panel), 2 coaxial optical digital output component video switching: 3 in, 1 out (100MHz bandwidth) 3 audio and 4 audio/video (including 3 S-video and one front-panel) inputs 5.1-channel preamp input for connecting an Super Audio CD (SACD) or DVD-Audio player 7.1-channel preamp output for system expansion no phono input high-current, low-impedance amplifier design 56 AM/FM presets 2 sets of main speaker outputs 17-1/8"W x 5-3/4"H x 17-5/16"D warranty: 2 years 60-day returns MFR # AVR-1906B What's in the box: Denon AVR-1906 owner's manual DETAILS More details on the Denon AVR-1906 Stacey B. Researched by Crutchfield's Stacey B. Features & specs Amplification Number Of Channels--- Stereo RMS Power (watts)--- THD in Stereo--- Frequency Bandwidth (stereo)--- Minimum Impedance L/R6 ohms Minimum Impedance Center6 ohms Minimum Impedance Surround6 ohms Amplifier Class--- Bluetooth Version Info--- Receiver ModeNo BluetoothNo Transmitter ModeNo AAC PlaybackNo aptX PlaybackNo aptX-HD PlaybackNo LDAC PlaybackNo Features Apple AirPlay--- Chromecast built-inNo DTS Play-FiNo Alexa-compatibleNo Google Assistant-compatibleNo App Remote ControlNo Built-in Radio TunerNone On-Screen Display Room Correction--- Multi-room Audio/Video Powered Multi-room Audio OutputNo Preamp Multi-room Audio OutputNo Multi-room HDMI OutputNo Total Number of Zones2 Playback from Digital Audio InputsNo Playback from Streaming SourcesNo Surround Processing Dolby DigitalYes Dolby AtmosN/A Dolby Atmos Height Virtualization--- DTSYes DTS:X--- DTS Virtual:X--- High-res Audio Playback From NetworkNo From USB Thumb Drive (USB-A)No From Computer (USB-B)No Inputs Audio-Video Inputs4 Number of HDMI Inputs--- Component Video Inputs3 Audio-only Inputs3 Phono InputNo Optical Digital Inputs3 Coaxial Digital Inputs2 Multi-Channel Analog InputNo Ethernet Port--- USB ConnectionsNone Outputs HDMI Monitor Outputs--- Component Video Monitor Outputs1 Optical Digital Outputs1 Coaxial Digital OutputsNone Subwoofer Outputs1 Discrete Subwoofer OutputsNo Multi-channel Preamp OutputYes Main Speaker Output Pairs2 Speaker TerminalsBinding Posts HDMI Features HDMI Version--- VRR (Variable Refresh Rate)No ALLM (Auto Low Latency Mode)No 4K/120Hz-Capable InputsNo Audio Return ChannelNo Video UpscalingNo HDR (High Dynamic Range) Support HDR10No HDR10+No HLGNo Dolby VisionNo Other Info DAC Bit Depth--- DAC Sample Rate--- FM Sensitivity11.2 dBf Multibrand Remote Control--- Learning RemoteNo Removable Power Cord--- Supports Wireless Rear SpeakersNo Width (inches)17.125 Height (inches)5.75 Depth (inches)17.3125 Weight (pounds)--- Parts Warranty2 Years Labor Warranty2 Years The Denon AVR-1906 replaces these items: Denon AVR-1905 Product Research Features Remote Control Inputs and Outputs Notes Features Digital Signal Processing (DSP): The Denon AVR-1906 is equipped with a new high-resolution Analog Devices Hammerhead 32-bit floating DSP processor. All elements of the Surround Processor are optimized to the highest standards by the use of selected high performance and discrete components, particularly the A/D and D/A converters and the sophisticated DSP surround decoder. Surround Modes: This receiver incorporates a wide variety of surround modes to bring you maximum enjoyment from your audio and video software. The surround modes include: Dolby Digital Surround EX Dolby Digital Dolby Pro Logic II Music Cinema Game Dolby Pro Logic Dolby Pro Logic IIx Music Cinema Game (2-channel sources only) DTS Digital Surround DTS-ES Extended Surround DTS-ES Discrete 6.1 DTS-ES Matrix 6.1 DTS Neo:6 Surround Neo:6 Cinema Neo:6 Music DTS 96/24 Denon Original Surround Modes (DSP) Rock Arena Jazz Club Mono Movie Video game Matrix 5CH/7CH Stereo Personal Memory Plus: The receiver has a personal memorization function that automatically memorizes the surround modes and input modes selected for the different input sources. When the input source is switched, the modes set for that source last time it was used are automatically recalled. The surround parameters, tone control settings, and playback level balance for the different output channels are memorized for each surround mode. Audio Delay Setting: When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. By inputting the distance between the listening position and each speaker, the proper amount of delay is applied to synchronize the sound with the picture. Auto Setup: The receiver is equipped with an Auto Setup function, to achieve the most ideal sound field for your room. With the supplied DM-S205 microphone placed at the listening position, the receiver automatically and accurately analyzes, adjusts and sets the speaker configurations of your system. It will set the following parameters: The speaker connection, polarity, and bass reproduction The delay time from each speaker corresponding to the listening position Sets the volume level for each speaker Channel Level Select: From the remote, you can easily change the levels of the individual channels during playback of any source. There is a channel input button on the remote that you need to press multiple times to source through the individual channels. You then use the left and right arrow keys to control the volume level. Cinema EQ: The Cinema EQ function gently decreases the level of the extreme high frequencies, compensating for the overly bright sounding motion picture soundtracks. You can select this function when the front speakers sound too bright. This function only works in the Dolby Pro Logic IIx, Dolby Digital, DTS Surround, and DTS Neo:6 modes. D.Comp (Dynamic Range Compression): For movies that a tremendous dynamic range (soft passages compared the loud passages), this mode allows you to hear all of the sounds in the soundtrack, but reducing the dynamic range. This feature only works in Dolby Digital or DTS mode. Two-channel Music Modes: There are two 2-channel playback modes exclusively for music: Direct: audio signals bypass the tone control circuits, and are transmitted directly, resulting in good quality sound. Stereo: allows you to adjust the tone to achieve the desired sound while watching video images. 24-Bit, 192 kHz D/A Converters: The AVR-1906 uses highly accurate Analog Devices 24-bit, 192 kHz Digital-to-Analog converters on all 8 channels. The 192kHz sampling and 24-bit word length capabilities of the DACs allows you to play high-resolution recordings and hear the increased clarity, detail and dynamic range of those recordings. Subwoofer Settings: When "Large" is set for the front speakers, and "Yes" is set for the subwoofer in the speaker setup, you can choose the following settings for the subwoofer channel: Subwoofer Mode: You can select one of two modes: LFE Normal: subwoofer plays the LFE channel signals (during playback of Dolby Digital and DTS signals) and the low frequency signal range of the channels set to "Small" in the speaker setup. Low frequencies for channels set to "Large" are played from those channels only. LFE + Main: subwoofer simultaneously plays the low frequency signal range of the channels set to "Large" and the LFE channel signals. In this playback mode, the low frequency range expands more uniformly through the room. Crossover Frequency: You can adjust the cutoff frequency of the subwoofer output from 40Hz, 60Hz, 80Hz, 100Hz, 120Hz, 150Hz, 200Hz or 250Hz. Dual Source/Dual Zone Capability: The AVR-1906 allows you to enjoy one source in your main listening room, while another source plays in a remote room. Depending on how you configure the receiver, using the dual zone capability of this receiver will require an amplifier and speakers, a set of powered speakers, or simply a set of non-powered speakers located in a remote location. If the receiver is set up for 7.1 surround operation, the Zone 2 RCA outputs act as fixed-level line outputs, and there are no Zone 2 amplified (speaker-level) outputs; in this configuration, the RCA line outputs must be connected to an amplifier or powered speakers equipped with a volume control. If the main room is configured for 5.1-channel surround, the Power Amp Assign function allows you to use the two Surround Back speaker outputs to power speakers in your remote listening room. When the Power Amp Assign function is active, the level of the Zone 2 speaker and preamp outputs can be controlled with the Zone 2 volume buttons on the remote. Video Up-Conversion: The receiver's video transcoding technology converts composite and S-Video signals to component video signals to output to the monitor. This allows you to enjoy the highest picture quality from all video gear connected to the receiver. In addition, composite video signals are up-converted to S-Video and S-Video signals are down-converted to composite for connecting convenience. HD Video Switching: The unit has three assignable component video inputs and a high-performance relay that is used to switch the signals. The switcher has an extended bandwidth range of up to 100 MHz, making it compatible with progressive DVD (480p) and HDTV formats (720p and 1080i). Rename Input Function: Allows you to input the names or brands of each individual sources so that they appear both on the display and on-screen. Source Input Level Controls: Allows you to adjust the playback level of each input so that all sources are at the same level. This function will eliminate the need for adjusting the main volume each time the input source is switched. Recording One Source While Watching Another: Using Zone 2/Rec Select button on this receiver, you can record a second while you are watching or listening to another source. This only works with analog signals; Digital audio signals will not be passed analog. Remote Control RC-978 Remote Control: The AVR-1906 comes with a remote control that can operate the receiver as well as other remote control capable Denon components. In addition, the remote is pre-programmed with control signals for other brands of products, including DVD players, DVD recorder, VCRs, TVs, cable boxes, DBS, CD players, CD recorders, MiniDisc players/recorders, cassette decks, and Laserdisc players. Inputs and Outputs Notes Assignable Digital Inputs: The AVR-1906 features 3 optical digital (Toslink) inputs and 2 coaxial digital inputs. Each input can be assigned to any of the different input sources except Tuner and V.Aux (front panel). There is also one Optical Digital output for use with a CD, MD or other digital recording device. 5.1 Multi-Channel External Input: The AVR-1906 is equipped with a 5.1-channel input to accommodate present and future multi-channel formats. These inputs are rated from 10Hz to 100kHz for high resolution audio sources such as SACD or DVD-Audio. Speaker Terminals: All of the receiver's speaker terminals are binding posts. They are not 5-way binding posts because a plastic collar prevents their use with spade lugs and they are positioned too far apart to be used with dual banana plugs. Room-to-Room Remote Jacks: The receiver has a mini-jack input for use with an optional Denon RC-616 IR re-transmitter. The adjacent room-to-room output is for future use. Front Panel (V.Aux) Inputs: On the front panel, there are RCA stereo audio inputs, an RCA composite video input and an optical digital input for conveniently connecting a game console or camcorder. Headphone Jack: The receiver has a standard 1/4" headphone jack on the front panel for private listening. When headphones are plugged in, the receiver's speaker and preamp outputs are automatically turned off.
Price: 249.87 USD
Location: Muskegon, Michigan
End Time: 2024-08-06T11:31:35.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Supported Modes: FM, AM
Receiver Combo Features: Digital Tuner, Radio Tuner
Color: Black
MPN: AVR-1906
Surround Sound Formats: Dolby Digital Surround EX, Dolby Pro Logic II, DTS 96/24
Compatible Product: Antenna, Cable
Audio Outputs: Banana Speaker Jacks, Headphone Jack, S-Video, Digital Coaxial RCA, RCA, Stereo L/R RCA
Number of Outputs: See Photos
Brand: Denon
Type: A/V Receiver
Audio Inputs: Coaxial Digital, AUX, Digital Coaxial RCA, S-Video, Stereo L/R RCA, Phono/Turntable, Multi-Channel RCA, AM, Pre Out, Sub Pre Out/LFE, TRS/Audio Jack, Two-Channel RCA
Number of Channels: 7.1
Manufacturer Warranty: None
Number of Inputs: See Photos
Model: AVR-1906
Features: Digital, Analog
Power: 85-120W
