Creality 3D K1 Max FDM 3D Printer

Description: Creality 3D K1 Max FDM 3D Printer - CR-K1 MAX (NIB) Key Features11.8 x 11.8 x 11.8" Building Area0.1 to 0.35mm Layer ResolutionSingle Extruder Design1.75mm Filament SupportMultiple Filaments Supported4.3" Color TouchscreenFlexible Heated Build PlateAuto Leveling CapabilitiesUSB & Wi-Fi ConnectionsDie-Cast Aluminum Alloy Frame Creality K1 Max OverviewFor builders looking for speed and agile printing productivity, the Creality K1 Max 3D Printer features a solid die-cast aluminum alloy frame that promotes swiftness without compromising quality.Providing you with a build area of 11.8 x 11.8 x 11.8", you have plenty of room for your larger and more bust creations. A single extruder boasts a high temperature of 572°F, suitable for handling multiple 1.75mm filaments including ABS, PLA, PETG, TPU, and more. Rail and extruder design enables the K1 to achieve printing speeds up to 600 mm/s, while retaining a 0.1 to 0.35mm resolution. The aluminum-alloy heat bed spreads heat uniformly and quickly and can handle up to 248°F while also using hands-free auto-leveling to ensure your models are printed evenly. Sticky and heat-resistant build plate assists with removing your finished models. The K1 can print via USB drive or Wi-Fi wireless technology, allowing you to control the K1 in person or remotely.Always Print at Full SpeedWith 20000mm/s2 acceleration, K1 ramps up to 600mm/s in only 0.03 seconds, delivering full speed in 90% of the printing time.Dual Fan Model CoolingA large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too.Creality Print 4.3" Speed GenesThe latest self-developed slicer Creality Print 4.3 includes rich presets, and streamlines the slicing process into 3 simple stages. Even better, it bolsters high-speed printing with variable line width, arc path, and so on.AI EnhancementsThe 1 μm resolution LiDAR will scan the first layer on its own. It will pause printing and tell you immediately if something goes wrong. K1 Max uses an AI camera to watch over spaghetti failure, foreign objects, debris, and more. It will alert you when an error occurs and also supports real-time monitoring and creates time-lapses for sharing.Enhanced Computing PowerK1 Max adopts the smart Creality OS. It features a straightforward UI, and syncs data and commands with PC, phone, Cloud, and add-on modules. The snappy dual-core 1.2GHz CPU powers high-speed printing with ease. The 8G ROM stores up to 400 model files and enables quick writing and reading.ConnectivityOnce K1 Max is connected via Wi-Fi or RJ45 Ethernet port to the LAN or Internet, you can monitor and control the printing from a PC or phone with Creality Print software or Creality Cloud.Pre-Assembled DesignK1 is assembled and calibrated before shipment and offers a boot-up quick guide. Just start printing the moment your K1 arrives.Easy Self-Testing CapabilitiesGive a tap, and K1 will self-test the extruder, heat bed, camera, fan, leveling, etc. Any abnormality detected will prompt on the display. So, users can proceed confidently without a hitch.Hands-Free Auto LevelingAn array of strain sensors is embedded in the heat bed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don't need to lift a finger or pay any attention.Integrated G-SensorA G-sensor in the printhead measures the resonance frequencies of high-speed printing and auto-tunes the printer to mitigate it. No more ghosting or ringing on the print.Built-In Air PurifierThe built-in air filters will purify unhealthy compounds generated during printing, making printing much more pleasant.Filament CompatibilityThe K1 is compatible with ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, and PET-CF filaments. Creality K1 MaxSpecsKey SpecsPrint TechnologyFused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM)Build Volume11.8 x 11.8 x 11.8" / 30.0 x 30 x 30.0 cmLayer Resolution100 to 350 micron / 0.1 to 0.35 mmFilament Compatibility1.75 mm Diameter:ABS, ASA, PET, PETG, PLA, TPUBuild Plate FeaturesAuto Leveling, HeatedSupported 3D File Types.amf, .obj, .stlPrinterPrint TechnologyFused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM)Build Volume11.8 x 11.8 x 11.8" / 30.0 x 30 x 30.0 cmNumber of Extruders1Layer Resolution100 to 350 micron / 0.1 to 0.35 mmSupported Extruder Nozzle Diameter0.4 mm (Included)0.6 mm (Sold Separately)0.8 mm (Sold Separately)Extruder Nozzle Temperature572°F / 300°CPrint Speed600 to 2000 mm/sFilament Compatibility1.75 mm Diameter:ABS, ASA, PET, PETG, PLA, TPUBuild AreaBuild Area TypeEnclosedExtendableNoBuild Plate FeaturesAuto Leveling, HeatedBuild Plate Temperature248°F / 120°CFilament Spool StorageExternalConnectivitySystem Connection1x Unspecified USBWirelessWi-Fi*Built-InMedia/Memory Card SlotNoSoftwareSupported 3D File Types.amf, .obj, .stlGeneralInput Power100 to 240 VAC, 50 / 60 HzDimensions (W x H x D)17.1 x 18.2 x 20.7" / 435 x 462 x 526 mmWeight39.7 lb / 18 kgPackaging InfoPackage Weight53.7 lbBox Dimensions (LxWxH)24 x 20 x 20"

Price: 649.95 USD

Location: Knoxville, Tennessee

End Time: 2024-12-06T19:42:09.000Z

Shipping Cost: N/A USD