Description: Switch Note: Disconnect the power to the fan before removing the old switch. Make sure to write down the position of all wires that you disconnect in the process of removing the switch. Do not cut wires from old switch, but remove by inserting blade of very small screwdriver next to wire and pulling out. Then insert the tinned wires in the same order as removed into the new switch." (If you cut the wire you will lose the stiff tinned end and make it difficult to insert into the new switch unless you strip and re-tin it again with a soldering iron)
Price: 6.99 USD
Location: Denver, Colorado
End Time: 2025-01-06T08:50:59.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Return policy details:
Brand: Does not apply
Type: Does not apply
Item model number: 1
Switch Type Ignition Switch: Material Zinc Alloy
Current Rating: 10 Amps
Number of Lights: 1
Control Method: Touch
Batteries Included?: No
Number of Positions: 2
Controller Type: Pull Chain
Unit Count: 1.0 Count
Connectivity Protocol: Wi-Fi
Product Dimensions: 0.39 x 0.39 x 0.39 inches
Assembled Width: 1 centimeters
Mounting Type Wall Mount: Specification Met CSA, UL
Assembled Height: 1 centimeters
Item dimensions L x W x H: 0.39 x 0.39 x 0.39 inches
Actuator Type: Pull Chain
Batteries Required?: No
Item Weight: 0.317 ounces
Shade Material: Iron
Part Number: 1
Color: Bronze
Assembled Length: 1 centimeters
Power: 160 watts
Operation Mode: ON-OFF
Plug Format: A- US style
Contact Type: Normally Open
Contact Material: Bronze
