Caltric Secondary Clutch For Polaris RZR 800 EFI 2008 2009 1322707 ATV

Description: Tap here to read more about Caltric Secondary Clutch For Polaris RZR 800 EFI 2008 2009 1322707 ATV Premium Quality Replacement Part Tied Roller Secondary Clutch For Polaris Models:RZR 800 EFI 2008-2009Order Includes: 1x Secondary Clutch : 1322707 1322515 1322550 1322835 1323050 1322985 1322795 132287 Outer Diameter : 244mm Shaft Diameter : 23.3mm Height : 160mm Installation tip : When installing clutch rnake sure to place the vehicle in High, Low, or Reverse to hold the transmission input shaft from spinning. This will allow easy alignment of the clutch onto the transmission splines. Torque secondary clutch retaining bolt to 17ft/lbs. We recommends Polaris High Performance Belt #3211162 for proper opertion. Make sure the RZR is in Park and then rotate the secondary clutch by hand until the belt is at full ride height in the secondary clutch. Check the belt alignment in the primary clutch. The belt should be directly inthe center of the sheaves on the primary clutch with a small amount of gap on both sides of the belt. If the alignment is off, remove the belt, secondary clutch and add / remove clutch alignment shims on the shaft behingd the secondary clutch. Belt Removal / Clutch Compression Tool is highly recommended. **MANUFACTURED TO MEET OR EXCEED OEM PERFORMANCE** **SHIPS FROM USA** Check out our EBAY Store!

Price: 149.99 USD

Location: Pacoima, California

End Time: 2024-09-03T19:13:11.000Z

Shipping Cost: 0 USD