Description: (1) BRUSHLESS motor/gearbox Tested and confirmed working. They could be used for many electric powered vehicles(rc lawn mower, large scale rc crawler , DIY Segway etc). They are BRUSHLESS dc motors with hall sensors. YOU NEED A BRUSHLESS MOTOR CONTROLER TO RUN THESE Power rating is 250W Rated for 24v 15Amp Output rpm rating is 100rpm at 24v.(so this could be higher/lower depending on what voltage you use) The large BROWN/YELLOW/BLUE wires are the phase wires. The Small Red/Black/Blue/Yellow/Green are for the Hall sensors(if used) These can be used with a sensored or sensorless controller(ESC) although a sensored controller will have much better torque. Mounting holes are M6-1.0 Motor output Flange is 45MM diameter with 2 sets of 6 holes on a 37mm Bolt circle (6 holes are threaded M6-1.0, Other 6 are not threaded 5mm Diameter holes) Motor output Flange is Steel. Weight is 7 Lbs Single stage gear reduction, can be back driven (spun with not under power) Please check out the pictures and feel free to ask any questions you may have. Thanks for looking.
Price: 35 USD
Location: USA
End Time: 2024-09-26T02:57:46.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Non-Domestic Product: No
Brand: N/A
Type: All-Terrain Wheelchair
Power Source: Electric
Custom Bundle: No
MPN: Does Not Apply
Modified Item: No
