BowHouse SVT Carbon Fiber Slipper Pads for Axial SCX6 BS6-0010

Description: RCRepairParts / RCCrawlerCountry A Division of BSM Sales Group BowHouse SVT Carbon Fiber Slipper Pads for Axial SCX6 PN: BS6-0010 Buy it at RCCrawlerCountry for $18.00 The Axial Racing SCX6 is a beast, but the stock slipper setup isn't quite up to the challenge. Our SVT Carbon Fiber Slipper Pads take care of this in two ways. First, the carbon fiber pads are much more durable than the stock pads, and they don’t break down from heat or grease. Second, we've included Belleville washers to maintain consistent pressure on the slipper plates and pads. The result is a durable slipper system that allows you to adjust and maintain tension to optimize performance and protect your running gear. INCLUDED 2x carbon fiber slipper pads 4x Belleville washers 1x M5 lock nut INSTALLATION NOTES Remove transmission and save all mounting hardware. Remove motor and spur cover and save all mounting hardware. Remove stock spacer, slipper clutch and spur gear from spur shaft. You will reuse the spur gear and spacer, but not the stock M5 flanged nut. Remove stock slipper plates and clean any grease or oil from the plates. A slipper clutch assembly will not function correctly if grease or oil gets between the pads and slipper plates regardless of the pad material. Remove stock slipper pads from spur gear and replace with carbon fiber pads. Reinstall spur gear with slipper plates onto spur shaft, followed by stock aluminum spacer. IMPORTANT NOTE - stock slipper plates are slightly convex (c-shaped) due to the stamping process used to make them. We recommend installing the plates so the convex side of each plate faces the spur gear to avoid excess pressure between the rim of the plates and the slipper pads. It should look like this: )I( Install desired number of Belleville washers (conical springs) onto slipper shaft and tighten with included M5 lock nut. We recommend using 2-3 Belleville washers, aligned in the same orientation. For 2 springs, it should look like this: )) For 3 springs, it should look like this: ))) The washers should be installed with the concave side facing the slipper plate like this: I)) Reinstall motor and spur cover on transmission, and then reinstall transmission on skid plate. SHIPPING POLICY: For in stock & drop shipment items we use USPS and UPS. In stock items will ship within 1-2 business days but please allow 7-10 business days for delivery to your door. For drop ship items please allow 1-3 weeks for delivery. Once your order has been shipped, you will normally receive e-mail notification along with the order tracking number. Orders shipped directly from manufacturers may not have tracking numbers immediately available. RETURN POLICY: BSM Sales Group / RCCrawlerCountry will take customer returns within 14 days of customer receiving the item(s) but RC vehicles & parts must be unused and returned in the original unopened factory sealed box. All returns may be subject to a 10% restocking fee. Opened boxes and or used RC vehicles & parts are not returnable for a refund or exchange. Electrical items are NOT RETURNABLE. Defective or damaged RC vehicles & parts are to be warrantied by the RC vehicle mfg not BSM Sales Group/ RCCrawlerCountry. Buyer must register the RC vehicle with the mfg in order for the warranty to be valid. Please inspect for shipping damage right away before opening box and if damage is suspected please contact us immediately and we will advise at that point. Buyer is responsible for all return shipping charges unless other accommodations are made by us or RC MFG. All payments must be made within 5 days of purchase. If payment cannot be made within 5 days please contact Us. We value your business, thank you for shopping with us!

Price: 18 USD

Location: Londonderry, New Hampshire

End Time: 2024-08-13T01:24:33.000Z

Shipping Cost: 4.59 USD