Description: If you need the pump to work in a low water level environment (the water level does not exceed the pump), the float switch need to be locked on the pumpThe working principle of the water pump is that the float switch goes down vertically, the beads inside are stuck on the line under the float switch, and the water pump starts automaticallyKindly Tip: When you start use the pump you must be submerged into the water at a slight angle to allowthe remaining air to escape1 HP High Power: Prostormer Sump Pump uses 1 HP power, Max 3700 Gallon Per Hour rating tackles any draining job at a fraction of the timeMulti Outlet Sizes: 3 different diameters outlets (1 inch ,1-1/4 inch, 1-1/2 inch) to adapte for different size hoses as needed according to the flow rate. The bigger the flow is, the wider the outlet should beKeep Open Mode: When you put the float switch locked on the sump pump, the sump pump will keep working all the time. Once the pump can not pump any water, you should cut off the power immediately to prevent the coil from getting burnedAutomatic ON/OFF Mode: The float switch should be unlocked from the pump. When the water level rises above the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the powerSealing Structure & Durable Construction: The sump pump features a durable sealing structure and the durable thermoplastic body keeps the pump from corrosion. The higher base plate which assures the prevention of debris collection in the sump pit
Price: 76.99 USD
Location: Rosario
End Time: 2024-11-04T10:42:14.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Deep Well Pump
Unit Type: ft
Horse Power: 1 HP
Item Height: 6.69"L x 6.69"W x 12.2"H
Item Length: 6.69"L x 6.69"W x 12.2"H
Item Width: 6.69"L x 6.69"W x 12.2"H
