BMR 160 OMR 160 OMP SMR 160 Replace Danfoss Hydraulic Motor Orbital Shaft 25mm

Description: BMR 160 OMR 160 OMP SMR 160 Replace Danfoss Hydraulic Motor Orbital Shaft 25mmBMR 160 Replace Hydraulic Motor Orbital Shaft DescriptionThis hydraulic motor is not only made of sturdy and durable materials, but also has high speed and torque. The stator rotor and bearings have high precision and strong pressure resistance. It can be widely applied in industries, agriculture, and other fields, providing you with strong power.Key FeaturesBuild to Last: It is made of cast iron and rubber, and adopts painting process, which makes the whole product corrosion-resistant,wear-resistant, high-temperature resistant, sturdy, and stable, and can maintain its practicality for a long time.Good Sealing Performance: Equipped with three layers of rubber sealing rings, it greatly enhances its sealing performance and can effectively prevent oil leakage, making your user experience better.High Precision: The oil pan, stator, rotor pair, and output shaft inside ensure the high precision of the product and make your use more accurate and error-free.Strong Compression Resistance: The bearing has strong radial force and high pressure resistance, which can effectively extend the service life of the product.Strong Power: High speed (continuous: 354rpm; discontinuous: 425rpm) and high torque (continuous: 228N * M; discontinuous: 261N * M) bring you stronger power, thus improving your efficiency.Powerful Function: As an executive component of the hydraulic system, the motor can effectively convert the liquid pressure energy provided by the hydraulic pump into the mechanical energy (torque and speed) of its output shaft, thus providing sufficient energy.Easy to Clean: The simple structure, small body, and smooth surface allow you easily clean the dust with a soft towel and water.Protective Packaging: The sponge can better protect your product during transportation and make it delivered to you completely to the greatest extent.Good Customer Service: Communication is the best way to solve problems. If you encounter any problem after purchase, please contact us in time before opening or unpacking the box. We will do our best to solve the problem for you.DetailsRound Corners: Compared with traditional square corners, an arc design can better care for your skin.Anti-slip Base: The base with four support legs can effectively maintain stability during the process.ApplicationIt has a wide range of applications, mainly used in the rotating mechanisms of various machinery such as agriculture, fisheries, light industry, lifting and transportation, mining, and engineering machinery.SpecificationStyle: ModernColor: BlackModel: Diamond Flange BMR-160Displacement: 160CCMaterial: Cast Iron, RubberSurface Treatment: Painting Number of Items: 1Assembly Required: YesMount Type: Mechanical EquipmentPort Size: G1/2'' Net Weight: 7.4kg/16.31 lbsGross Weight: 8kg/17.64lbsPackage Size: 26*13*10cm/10.24*5.12*3.94inchMax Speed: 354/425 RPM(Continuous/Discontinuous)Flow: 57/68 LPM (Continuous/Discontinuous)Torque N.m: 228/261 (Continuous/Discontinuous)Pressure Drop:115/124 Bar (Continuous/Discontinuous)Package Included1* Hydraulic MotorNotes1. We recommend that the normal operating oil temperature is 20~60℃/68-140℉, and the maximum system operating temperature is 90℃/194℉ (not more than one hour). The kinematic viscosity of the oil at 40°C/104℉ is 42-74mm2/s. The hydraulic oil can be selected according to the actual working and ambient temperature.2. We recommend that the filter precision be 10-30 microns. It is better to add a magnetic block at the bottom of the oil tank to prevent metal chips from entering the system. The solid pollution level of working oil shall not be higher than 19/16.3. The motor can be used in series or parallel. When the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM), the external drain port must be used for pressure relief. It is better to connect the external drain port directly to the oil tank.4. In order to make the motor have a long service life, the best working condition of the motor should be 1/3-2/3 of the rated working condition. When loading the motor, it should be operated at 30% of the rated pressure for about 1 hour. In any case, before loading the motor, ensure that the motor is filled with oil.5. It is strongly recommended to run the motor at 30% load for about 1 hour before running at full load to allow the motor to be fully run-in.6. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.On Jul 8, 2024 at 00:50:21 PDT, seller added the following information:

Price: 125.99 USD

Location: Chino, California

End Time: 2024-08-08T06:11:45.000Z

Shipping Cost: 0 USD