Bench Rest Ultra Micrometer Seater Die 7mm PRC

Description: The Ultra Micrometer Seater Die is a non-crimping style seater die (except for the 30-30) that holds the bullet and case in perfect alignment while the bullet is press-fit seated. A handy micrometer fixes the bullet seating depth to your specifications. After you have seated your bullet close to the desired depth and measured it, simply adjust the Micrometer stem up or down to the desired depth and the cartridge will be exactly the length you need. FINE TUNE ADJUSTMENT: Micrometer allows fine-tuning in either direction; easily adjustable to .0005″. Includes all the popular straight line seating features of the original Bench Rest Seater Die plus an ultra-accurate Micrometer for adjusting bullet seating depth. .001" GRADATION MARKS: Gradations at increments of .001″ are clearly marked. Bright, white markings make micrometer easy to read SEAT ACCURATE ROUNDS: Our innovative, caliber-specific sliding die chamber holds the bullet, case and seating stem in perfect alignment while the bullet is seated, supporting the entire outside diameter of the sized case rather than just the bullet and case neck. It eliminates much of the trial and error that was once associated with seating accurate rounds ACCURATE & CONSISTENT: Non-crimping style provides accuracy, consistency and virtually flawless alignment. Use if you like to experiment with various bullets and loads for many different shooting applications. WIDE COMPATIBILITY: Seating stems supplied with our standard seaters have plenty of clearance to allow any bullet to be seated off the ogive and not the tip, compatible with even special bullet needs such as those encountered during the loading of most very low drag (VLD) bullets.

Price: 175.31 USD

Location: Brentwood, New York

End Time: 2025-01-04T18:35:08.000Z

Shipping Cost: 0 USD