Description: This is a heavy duty motor electrical micro switch made for MANY brands of Automotive lift power units.It controls the hydraulic motor and is the Up / Raise button for many lifts.It came in many OEM application on motors in Rotary lift, Forward Lift, Direct Lift, Hanmecson Lift, Challenger Lift, VBM Lift, Whip Lift, Western Lift Worth Lift & many more.It was used in motors built by SPX, Fenner Stone, Monarch, Barnes, Doer, Emerson, and used in other brand motors as well. Please see below for OEM part # reference.ALM A00242, Ammco 80282, Benwil 300282, 290037, Challenger Lift 1258-AA, Fenner 1288AA, Forward 991088, 991226, Manitowac C-723-20, Monarch 0352, MTE 69210023, Rotary Lift P461-2, FJ7108-2, SPX 1258-AA, SVI BH-7004-19, Western S707, Wheeltronics 6-0916 This is a heavy duty motor electrical micro switch made for MANY Rotary lift power units. It controls the hydraulic motor and is the Up / Raise button for many lifts. It was used in motors built by SPX, Fenner Stone, Monarch, Barnes, Doer, Emerson, and used in other brand motors as well that rotary used. Please see below for OEM part # reference. ALM A00242, Ammco 80282, Benwil 300282, 290037, Challenger Lift 1258-AA, Fenner 1288AA, Forward 991088, 991226, Manitowac C-723-20, Monarch 0352, MTE 69210023, Rotary Lift P461-2, FJ7108-2, SPX 1258-AA, SVI BH-7004-19, Western S707, Wheeltronics 6-0916 This Switch is rated for 25A and is usually found on 208-230VAC motors but can be used on 110V also. It has 3 screw terminals on the back/ bottom of the Micro switch where wires are connected (wires typically only connected to 2 out the 3 terminals). The terminals are usually marked “NO” “NC” “COMMON” or “COM” and the switch can be set up for normally open or normally closed operation.The front of the switch has a metal button/ plunger which is what actuates the switches operation. The plunger goes into a brass colored housing which has threads and nuts allowing the switch to be mounted to the face plate/ cover of the motor. Rotary Car Lift Electric Switch / Push Button for Hoist Most of the time when these switches fail, they either burn out at the terminal or can stick on and continually run the motor. Your old switch can be tested with a simple continuity test to identify if the switch is the cause of your problems. This switch can be wired Normally open or Normally closed depending on what terminals are used.
Price: 23.12 USD
Location: Denver, Colorado
End Time: 2024-09-14T07:43:36.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Does not apply
MPN: Does not apply
Connectivity Protocol: X-10
Actuator Type: Rotary
Switch Type Push Button, Rotary: Material Metal
Product Dimensions: 2 x 2 x 0.7 inches; 0.01 ounces
Control Method: App
Connector Type: Screws
Terminal: Button
Operating Voltage: 110 Volts
Item Dimensions LxWxH: 2 x 2 x 0.7 inches
Mounting Type Panel Mount: Specification Met Oem
Controller Type: Push Button
Type: Does not apply
