AudioControl ACX-3.2 All-weather Equalizer & Crossover + Mic

Description: Product highlightsstereo 4-band graphic equalizer and crossover with paging mic 2-channel input (up to 7 Vrms) input gain, master output volume, front-rear fader, and sub-level controls paging microphone with push-to-talk button included mic gain controls mic/source balance 4-band graphic EQ Parabass® low frequency (40-80 Hz, +/-10 dB) low-mid (125 Hz, +/-10 dB) mid (1.25 kHz, +/-10 dB) high (10 kHz, +/-10 dB) variable Linkwitz-Riley crossover (10-100 Hz, 24 dB/octave) for sub integration stereo front, rear, and subwoofer outputs (up to 9.5V peak) selectable balanced/unbalanced inputs, mic routing, and ground isolation selectable illumination (red or blue) dash or console-mountable — brackets included 16- to 18-gauge power and ground wires and a 1A fuse recommended chassis dimensions: 6-5/16"W x 1"H x 6"D warranty: 5 years What's in the boxAll-weather sound processor PTT Microphone with attached 4.5' coiled-cable 4-Pin terminal block (installed) 2 Mounting brackets Mic mounting bracket Four 1/8" screws Two 3/8" screws Owner's manual Quality control information About this itemWritten by Crutchfield's Buck PomerantzTake control AudioControl's ACX-3.2 all-weather processor gives you control over your on-road, off-road, or marine sound system's volume, tone, and balance, while also adding public address features. You can employ the included PA mic to communicate with patrons and workers on buses and food trucks, wakeboarders and skiers behind boats, or just talk with your buddies while motoring on a trail. The ACX-3.2 preamp-style processing includes 4-band equalization to produce the best sound possible and variable crossover settings to manage subwoofer/bass integration. The optional ACX-BT1 Bluetooth adapter lets you stream directly into the system from your phone or tablet. Part of AudioControl's all-weather system AudioControl designed the ACX-3.2 processor to work with their ACX Series all-weather powersports/marine amplifiers — and it's also compatible with almost any other aftermarket receiver and amp. The ACX-3.2 features conformal-coated circuit boards that resist corrosion, but it is not water-resistant and should be mounted in a suitably protected location. Mounting brackets are included in the package. There're even options for cool blue or red illumination to add a bit of glitz to your audio system. ACX-3.2 control panel

Price: 359.1 USD

Location: Charlottesville, Virginia

End Time: 2024-11-08T17:45:17.000Z

Shipping Cost: 0 USD