Audio-Technica AT-VM95E/H Headshell/Cartridge Combo Kit

Description: AT-VM95E/HThe AT-VM95E/H combo kit includes the AT-VM95E dual moving magnet cartridge premounted on the AT-HS6BK headshell. VM dual magnet cartridge with 0.3 x 0.7 mil elliptical stylusAluminum cantileverSpecially wound coils increase output voltageDurable low-resonance polymer housingThreaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts or washers requiredCompatible with any AT-VMN95 replacement stylusUniversal ½"-mount headshell for 4-pin turntable cartridges Cartridge & StylusFrequency Response20-22,000 HzChannel Separation20 (dB at 1 kHz)Vertical Tracking Angle23°Vertical Tracking Force1.8-2.2 g (2.0 g standard)Stylus ConstructionBonded round shankRecommended Load Impedance47,000 ohmsCoil Impedance3.3 k ohms (1 kHz)DC Resistance485 ohmsCoil Inductance550 mH (1 kHz)Output Voltage4.0 mV (1 kHz, 5 cm/sec.)Output Channel Balance2.0 dB (1 kHz)Stylus Shape0.3 x 0.7 mil ellipticalCantileverAluminum pipeStatic Compliance17 x 10 – 6 cm / dyneDynamic Compliance7 x 10 – 6 cm / dyne (100 Hz)MountingHalf-inchDimensionsCartridge 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D; Cartridge & Headshell 21.2 mm (0.83") H × 21.4 mm (0.84") W × 62.4 mm (2.46") DAccessories IncludedTwo 11 mm installation screws, two 8 mm installation screws, two washersModelAT-VM95E/HMounting FeatureHalf-inch mountRecommended Load Capacitance100 to 200 pFReplacement StylusAT-VMN95EStylus Size0.3 x 0.7 milTypeVM Stereo Dual MagnetWeightCartridge 6.1 g (0.22 oz); Cartridge & Headshell 15.5 g (0.55 oz)Wire Used for CoilT.P. Copper

Price: 99 USD

Location: Thousand Oaks, California

End Time: 2024-02-18T21:43:43.000Z

Shipping Cost: 0 USD