Description: Atlas Clausing 4800 Spindle Lock Wedge Block. NOTE: THIS IS ONLY for the 4800 model Lathe, see my other items for standard lathes. Quality 3D printed Wedge Block used to remove stuck or tight chucks from these old lathes. The block works by grabbing drive gear teeth and spreading the torque load out among those teeth to NOT damage a tooth when removing a chuck. The more teeth it has and the better the fit means it cannot just be slapped on the gear and work well. A precision fit mates with the gears and needs slipped in from the side to mesh with gear teeth. If it fits easy, then ITS TOO LOOSE and could slip damaging your lathe!!! This part has dense infill optimized for maximum load in the direction tangent to the gear teeth and will last quite a while if not abused. Don't buy ones that look too thin or less infill density to hold up to the forces required to break a stuck chuck free. Fits 69 tooth spindle bull gear. Colors vary but are typically red, black, orange, or yellow. If you have a specific color from that list leave it in the comments and I will do my best to TRY and accommodate if possible. Note: does not include lathe or any other shown parts, and is for one plastic spindle wedge as shown. Take a look at my other Atlas Craftsman lathe parts!!!!! Video Showing the Quality of similar part being produced. This is not a "cheap" or "inferior" part, but rather a Quality Precision Part!!! Video will open in a new window
Price: 9.5 USD
Location: Merrimack, New Hampshire
End Time: 2024-08-12T17:15:41.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Atlas
Chuck Size: 12 in
Control: Manual
Treated Material: Plastic
Machine Type: Antique/Vintage Lathe
X-Axis: 12 in
Model: 4800
MPN: SLW-4800
Country/Region of Manufacture: United States
Modified Item: No
Swing Over Bed: 12 in
