Armattan Badger DJI Edition 5-inch FPV Freestyle Quad Frame

Description: Armattan Badger DJI Edition 5-inch FPV Freestyle Quad Frame The humble badger is the namesake of Armattan's newest flagship. With a design based off of the Marmotte frame, the Badger updates it with removable arms: carefully designed to ensure a rock-solid construction. Finding a way to simply fit the DJI technology inside a Badger was not something Armattan were too keen about. For one the Badger has no provisions for antenna management, and more importantly the FOV on the DJI cam would have propellers in view of the HD feed and recording. No problem. The DJI Badger is adapted to meet all of the above. Armattan have modified the LiPo top plate, and created custom moulded rubber parts to manage the DJI antennas. They changed the front camera position to remove props from view of the HD feed, and also made custom two-sided 3M foams to mount the DJI Air Unit with ease while providing better impact protection. The result is a Badger that appears to have been designed from the start around the DJI technology with all the goodness of Armattan's latest flagship release. This is the newest revision of Armattan's titanium cage; the same as on the Marmotte. And just in case you haven't heard what the perks of this cage are compared to any other, we'll run through them quickly here: - Independent HD camera tilt means there's no need to deal with foam wedges for the front or back of your recording camera. - A wide range of FPV cam tilt options. From 10 degrees to way too much. - 1mm FPV-cam savers: these are designed to bend so your camera won't break. - A minimized weight due to a state of the art, 6-axis milling process. And the best part? All of these perks come on top of the firm mount and incredible protection that you've come to expect from an Armattan product. Since having removable arms is the major draw for this release, we wanted to specifically mention how they work. The arms mount up with two bolts and two sunk-nuts each. The sunk-nuts go straight into the 4mm baseplate, so there's no need to worry about delamination. When installed, the arms meet in the center of the baseplate, further locking down the construction. Armattan are providing you with a remarkably solid, precise product, and we know that you will have full confidence in this frame. This frame comes with tons of other bells and whistles. As you've come to expect, an extended-aluminum rear provides a protected mount for your VTX antenna no matter whether you use a TBS, SMA, or U.FL style connector. The frame maintains compatibility with 5.5 inch props for those of you who like to ride the line, and the long body means you can more easily fit an HD camera and a bigger lipo, even with high cam tilt. The FC can mount up on either the 30.5mm or 20mm options, and there are even 20mm rear provisions as well for a VTX or any other board. Add the differences in carbon and the extra hardware, and you're probably expecting this frame to be considerably heavier than the fixed arm version (the Marmotte). Well due to our experience in design and some clever optimization, we've kept the difference down to 15g. You can thank us later. And of course everything comes with full warranty protection. Cage. Carbon. Everything. What's Included Titanium: 2x Camera-cage brackets 2x Camera-cage anchors Hardware: 10x 4mm M3 iron bolts 14x 6mm M3 12.9 grade steel bolts 8x 8mm M3 12.9 grade steel bolts 10x 10mm M3 12.9 grade steel bolts 12x Sunknuts 4x 16mm M3 iron bolts 6x 2.5mm M2 cuphead iron bolts Aluminum: 1x 23mm front standoff 2x tail posts 2x camera savers Nylon: 4x 6mm M3 standoffs 4x nuts 2x M6 nylon washers Carbon Fiber: 1x 2mm Top (LiPo) plate 1x 1.5mm HD Cam plate 1x 4mm Main plate 2x Antenna mount plates (TBS and SMA) Other: 1x Lipo strap 1x LiPo foam pad 1x HD camera foam pad 4x Dog-bone landing pads 1x Antenna mount 1x SMA grommet 1x Diamond-coated steel file 1x Build instructions Armattan Badger DJI Edition 5-inch FPV Freestyle Quad Frame The humble badger is the namesake of Armattan's newest flagship. With a design based off of the Marmotte frame, the Badger updates it with removable arms: carefully designed to ensure a rock-solid construction. Finding a way to simply fit the DJI technology inside a Badger was not something Armattan were too keen about. For one the Badger has no provisions for antenna management, and more importantly the FOV on the DJI cam would have propellers in view of the HD feed and recording. No problem. The DJI Badger is adapted to meet all of the above. Armattan have modified the LiPo top plate, and created custom moulded rubber parts to manage the DJI antennas. They changed the front camera position to remove props from view of the HD feed, and also made custom two-sided 3M foams to mount the DJI Air Unit with ease while providing better impact protection. The result is a Badger that appears to have been designed from the start around the DJI technology with all the goodness of Armattan's latest flagship release. This is the newest revision of Armattan's titanium cage; the same as on the Marmotte. And just in case you haven't heard what the perks of this cage are compared to any other, we'll run through them quickly here: - Independent HD camera tilt means there's no need to deal with foam wedges for the front or back of your recording camera. - A wide range of FPV cam tilt options. From 10 degrees to way too much. - 1mm FPV-cam savers: these are designed to bend so your camera won't break. - A minimized weight due to a state of the art, 6-axis milling process. And the best part? All of these perks come on top of the firm mount and incredible protection that you've come to expect from an Armattan product. Since having removable arms is the major draw for this release, we wanted to specifically mention how they work. The arms mount up with two bolts and two sunk-nuts each. The sunk-nuts go straight into the 4mm baseplate, so there's no need to worry about delamination. When installed, the arms meet in the center of the baseplate, further locking down the construction. Armattan are providing you with a remarkably solid, precise product, and we know that you will have full confidence in this frame. This frame comes with tons of other bells and whistles. As you've come to expect, an extended-aluminum rear provides a protected mount for your VTX antenna no matter whether you use a TBS, SMA, or U.FL style connector. The frame maintains compatibility with 5.5 inch props for those of you who like to ride the line, and the long body means you can more easily fit an HD camera and a bigger lipo, even with high cam tilt. The FC can mount up on either the 30.5mm or 20mm options, and there are even 20mm rear provisions as well for a VTX or any other board. Add the differences in carbon and the extra hardware, and you're probably expecting this frame to be considerably heavier than the fixed arm version (the Marmotte). Well due to our experience in design and some clever optimization, we've kept the difference down to 15g. You can thank us later. And of course everything comes with full warranty protection. Cage. Carbon. Everything. What's Included Titanium: 2x Camera-cage brackets 2x Camera-cage anchors Hardware: 10x 4mm M3 iron bolts 14x 6mm M3 12.9 grade steel bolts 8x 8mm M3 12.9 grade steel bolts 10x 10mm M3 12.9 grade steel bolts 12x Sunknuts 4x 16mm M3 iron bolts 6x 2.5mm M2 cuphead iron bolts Aluminum: 1x 23mm front standoff 2x tail posts 2x camera savers Nylon: 4x 6mm M3 standoffs 4x nuts 2x M6 nylon washers Carbon Fiber: 1x 2mm Top (LiPo) plate 1x 1.5mm HD Cam plate 1x 4mm Main plate 2x Antenna mount plates (TBS and SMA) Other: 1x Lipo strap 1x LiPo foam pad 1x HD camera foam pad 4x Dog-bone landing pads 1x Antenna mount 1x SMA grommet 1x Diamond-coated steel file 1x Build instructions × × × × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like iCharger 3010B Power Supply to Banana Plug Cable AC Power Cable - 3 Feet XT60 Charge Extension Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © ProgressiveRC Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via U.S. PayPal accounts and all Major Credit Cards, Debit Cards & Google Pay. We are legally required to collect sales tax in those states and localities where we maintain a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment destination's state and local sales tax laws. Thank you for shopping with us on eBay! Returns Returns are accepted Items must be returned within 30 days of the auction ending Buyer will pay for return shipping. eBay integration by

Price: 119.99 USD

Location: Seattle, Washington

End Time: 2024-02-12T21:03:31.000Z

Shipping Cost: N/A USD