AQUARIUM INTERNAL FILTER Fish Tank Submersible Water Pump 40 to 150 Gal TARARIUM

Description: AQUARIUM INTERNAL FILTER Fish Tank Submersible Water Pump 40 to 150 Gal TARARIUM Note You need to buy the suction pipe yourself. The diameter of the connector is 1.3CM/0.512 inches. The pump needs to be completely soaked into water to be totally silent. It is recommended to turn off the oxygen-increasing spin button at night. This way, it will not affect the operation of the filtration. Global view and Exploded view Product function introduction Make Waves For the pump & filter of aquariums, the rate of flow per hour is 300GPH, and maximum head is 1.6m. The outlet need to be placed on the surface of water to make waves. But, this way, it will make a little noise, and can not be completely silent. Therefore, it is recommended to soak the whole body of pump into the water. Increase Oxygen One of the special characteristics of this product is the function of increasing oxygen underwater. Please place the oxygen hose outside of fish tank, and the top of the oxygen hose is the the spin button of intake valve, which can be used to adjust air volume. When oxygen get out of water, there will be bubbles on the surface of the water, which will make a little noise. Therefore, if youd like to put the fish tank in the bedroom, we suggest to turn down or turn off the spin button of intake valve while you are sleeping at night. And no worries, the filter is is still working well. Double filter The filter contains two filter cotton, which is easy to disassemble and install, you can also change the filter cotton into other filter media. Pump water (can also be used for fish tank to change water) The outlet of the filter can be used for pumping water and changing water in the aquarium. Since the size of each aquarium is different, our product does not provide the hose for pumping water, You need to buy the suction hose of filtration pump yourself. The diameter of the connector is 0.512 inch/1.3CM. Installation steps of filter pump Disassemble the suction cup bracket Disassemble and remove the suction cup bracket of the pump Install the suction cups onto the bracket Install the three suction cups onto the bracket Install the suction cup bracket to head of pump Install the suction cup bracket to head of pump Install oxygen hose and the spin button of intake valve One end should be connected to outlet , and the other end should be connected to the spin button of intake valve.

Price: 43.41 USD

Location: Manchester, Iowa

End Time: 2023-10-17T22:39:23.000Z

Shipping Cost: 0 USD