Description: Alumiglow Epoxy Glow Kits 5 Min to 30+ Min Glow Times Super Bright & Durable Covers 25 - 50 Square Inches Enough for 4 - 5 Jigs Red | Orange | Yellow | Green Blue | Aqua | Violet | White Description Super bright, long-lasting and durable two part epoxy glow coating. Very durable, will not chip, peel or crack.Self levels and bonds permanently to plastic, wood and metals. Super bright glow times from 5 minutes (red/orange/yellow) to 15 to 30+ minutes (green/aqua/blue/violet/white).One kit is enough to coat 4 - 5 large Salas 6X, Salas PL68, Tady 4/0 or JRI-66 jigs. Works best on large jigs with flat surfaces.For small / round jigs, powder paint is a better option. Single Color Kits 8 grams glow pigment 3 mixing cups and mixing rods 2 syringes, 3 mL each with 15 gauge blut dispensing needles 8 mL resin and 8 mL hardener Enough material to coat 4 - 5 large Salas 6X, Salas PL68, Tady 4/0 or JRI-66 jigs Multi Color Kits: Green, White + Violet 8 grams each of green, white and violet glow pigment (24 grams total) 6 mixing cups and mixing rods 3 syringes, 3 mL each with 15 gauge blunt dispensing needles 16 mL resin and 16 mL hardener Enough material to coat 12 - 15 Salas 6X, Salas PL68, Tady 4/0 or JRI-66 jigs Directions Clean the jig with water and let dry. To cover 5 squre inches (approximately 1 Tady 4/0 jig), add 2 grams of pigment to 2 mL resin and 2 mL of hardener to mixing cup. Mix with mixing rod for one minute. To cover smaller areas, use less pigment, resin and hardener. But, always use a 1:1 ratio of resin to hardener. Apply material to a jig and let it self-level. Ensure your jig is level to begin with. Cure time is 12 hours. For finer detail, add mixed epoxy and pigment to a 3 mL syringe and dispense with blunt tip needle. Alternatively, use a toothpick or other thin object for even finer detail. TIP: To achieve the brightest glow, pre-coat your jig with a white spray paint or primer. This will help make an even brighter glow. Click the video below to learn more. Charging Up Your Jig Use a 365 - 390 nm UV flashlight, ambient room light or sunlight. Halogen and incandescent lights can be used also. Note: The violet color does not charge-up well under a UV light. It is best to use sunlight, or other type of flashlight, incandescent or flourescent light. Questions and Answers Q: How do I apply the epoxy? A: To coat a jig like of about 5 square inches in area, just mix 2 mL or resin with 2 mL of hardener and 2 grams of glow powder. Mix for a minute and then apply using a pick or the provided syringe. Make sure your jig stays level when applying epoxy so that you get an even coating! Q: Do I need to paint my jigs white before using the glow powder paint? A: If you apply over a white background, the jig will appear to glow brighter. Applying over a dark or grey background can result in decreased glow brightness. You can use a white primer or most white spray paints to apply a base coating. Just make sure it dries completely before you apply the epoxy. Q: Do I need to clear coat my jigs? A: No. The two part epoxy will cure to a smooth glossy finish. No need for a top / gloss coat!. Q: Will the epoxy stick to my jig? A: This two part epoxy will permanently bond to any of your wood, plastic or metal jigs. Once cured, it is not pratically possible to remove the coating. Q: Why does my glow violet epoxy coating glow dimly? A: The reason why is usually because it hast not been exposed to the right wavelength of UV light. The glow violet color is special because without the right UV light, it will not glow very brightly. Often times, UV flashlights are not effective and the powder paint must be exposted to direct or ambient sun light, or an incandescent / halogen light, in order to glow. Given that the glow violet color is not as bright as green, aqua and some other colors, any undercharging will show up as a dim violet glow color. For best results, expose to direct or ambient sunlight. This item includes a 100% money-back guarante. If you're not completely satisfied with your purchase for any reason, send it back within 30 days of delivery, and you will receive 100% of the final bid price GUARANTEED! Shipping Orders placed Monday - Thursday ship same day or within 24 hours. Orders placed by 6:00 AM on Friday will ship same day. Orders placed after 6:00 AM on Friday and through Sunday will ship on Monday. USPS tracking number provided on all orders. More Glow Paint Products Glow Powder Paint Kits
Price: 17.95 USD
Location: La Jolla, California
End Time: 2024-01-02T13:44:08.000Z
Shipping Cost: 6.45 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Model: Alumiglow
Country/Region of Manufacture: United States
Custom Bundle: No
Fishing Type: Ice Fishing
Modified Item: No
Non-Domestic Product: No
MPN: SRXXX-08
Fish Species: All Freshwater, All Saltwater
Type: Glow Coatings for Jigs and Lures
Brand: AlumiGlow
Available Variations
Color: White Kit
Price: 17.95 USD
Available Quantity: 64
Quantity Sold: 55
Color: Green Kit
Price: 17.95 USD
Available Quantity: 110
Quantity Sold: 107
Color: Violet Kit
Price: 17.95 USD
Available Quantity: 31
Quantity Sold: 7
Color: Blue Kit
Price: 17.95 USD
Available Quantity: 38
Quantity Sold: 25
Color: Aqua Kit
Price: 17.95 USD
Available Quantity: 56
Quantity Sold: 40
Color: White, Green & Violet Kit
Price: 29.95 USD
Available Quantity: 69
Quantity Sold: 67
Color: Red Kit
Price: 17.95 USD
Available Quantity: 40
Quantity Sold: 21
