AIMS PICOGLF20W48V120VR 2000 Watt Pure Sine Inverter Charger 48V DC to 120V AC

Description: $ImageURL1$AIMS PICOGLF20W48V120VR 2000 Watt Pure Sine Inverter Charger 48V DC to 120V ACPART NUMBER: PICOGLF20W48V120VRBRAND: AIMS PowerDESCRIPTIONAIMS Power 2000 Watt Pure Sine Inverter Charger 48V DC to 120V AC This is an industrial-grade unit with the ability to withstand surges of up to 6000 watts for 20 seconds, and it achieves this by virtue of its direct connect terminal block. This feature is one of the more sought-after in the inverter industry, allowing users to surpass the 1,500 watt maximum output of a GFCI outlet that would typically be seen on an inverter. The 2000 watt 48 volt low frequency AIMS Power inverter charger transforms DC (direct current) power, produced by solar panels and stored by batteries, into AC (alternating current) electricity that can be used to run most all tools and appliances. This inverter also has a built in AC-to-DC battery converter charger, which allows users to recharge their battery bank from an AC source such as a fuel-powered generator, shore power or a regular outlet at home. Use this product for renewable solar, off-grid home or business, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This product also has auto frequency detection that allows users to operate at either 50 or 60 hertz. It boasts an average 10 millisecond transfer time with the built-in transfer switch. This is an awesome feature for use with backup power applications, as it makes the inverter a nearly uninterrupted power supply (UPS) when combined with a battery bank. This inverter also features a battery-type selector, which helps user regulate the voltage going into the battery bank. This capability can be a big money-saver since treating the battery bank properly will maximize its lifespan. Features 2000 watt low frequency inverter 6000 watt surge for 20 seconds - 300% surge capability Battery priority selector AC direct connect terminal block Marine coated and protected Multi stage smart charger 20 Amp for gel, AGM, lead and lithium LiFePO4 Remote panel available Auto frequency 10msec typical transfer time 7 battery type settings for charger Selectable 25W power save mode (hibernation) Automatic transfer switch Product Specifications Inverter Output Specifications Continuous Output Power: 2000 Watts Surge Rating: 6000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Bypass terminal breaker - 30 amps Typical Transfer Time: 10ms (Max) THD: Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C) Input Specifications Nominal Input Voltage: 48.0Vdc Minimum Start Voltage: 40.0Vdc Low Battery Alarm: 42.5Vdc-44.0Vdc Low Battery Trip: 40.0Vdc-42.0Vdc High Voltage Alarm: 64.0Vdc Low Battery Voltage Restart: 53.2Vdc Idle Consumption: 28 Watts Power Saver Mode Idle Consumption: 12.7 Watts Charger Specifications Output Voltage: Depends on battery Type Charger Rate: 20A Over charge protection shutdown 62.8V Selectable charge setting based on battery type Adjustable charge current off-20%-100% Four stage smart charger Transfer Switch Specifications 30 amp automatic transfer switch 10ms (max) Dimensions Unit Weight: 42 lbs. Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches Shipping Weight: 53 lbs. Shipping L x W x H: 23.5 x 13.0 x 12.5 inches

Price: 915 USD

Location: Appleton, Wisconsin

End Time: 2024-12-28T14:39:18.000Z

Shipping Cost: N/A USD