Acrylic or Polycarbonate Panel Set for Bambu P1P ARC Enclosure CLEAR PANELS ONLY

Description: *CLEAR PANELS ONLY* One complete set of 3mm acrylic or polycarbonate panels to complete your Bambu Labs P1P ARC Enclosure project! Each set includes 5 pieces : 1 lid, 1 back, 1 door, and 2 sides. If you want to place your AMS on top of your machine it is highly recommended to upgrade to the 3mm set with a thicker 4.5mm lid panel since it won't flex as much under the weight. Added 4.5mm acrylic panel set option where all the panels (except the door) are 4.5mm! The door for this set needs to stay 3mm to hinge properly. I do take custom requests! I do have a lot of 3mm acrylic color options available if you're interested in alternate transparent or solid colors. I also take requests for engraving names/logos or any branding you would like on your front or side panels. Particularly useful if you are using this in youtube videos and would like visible edge lit branding! *NOTE* Polycarbonate panel sets are available at extra cost but these must be CNC machined and cannot be laser cut so they require more delivery time. Polycarbonate is the pro choice because it handles much higher temperatures than acrylic over time. All 3mm polycarbonate sets come with a very thick 6mm acrylic lid, Acrylic is stiffer than polycarbonate when warmed up and will handle the AMS weight better while the double thickness will handle the higher temps. *NOTE* the build uses 6mm screws to fasten the 3mm panels. If you choose to upgrade to 4.5mm or 6mm panels just remember you will most likely need 8-10mm screws for those areas.

Price: 75 USD

Location: Redmond, Washington

End Time: 2024-08-13T06:57:58.000Z

Shipping Cost: 0 USD