Description: These products are brand new. Sealed in their packages. All orders placed before 5 usually shipped the same day except for Sundays. The ACI Transmitter StrapOn Series features a standard twowire, 4 to 20 mA loop powered output signal with optional 3Wire voltage output signals available. The StrapOn transmitter should be used in retrofit applications where an immersionstyle sensor can't be inserted into the pipe or in applications where high accuracy is not required. For best results, ACI recommends cleaning the pipes with a brush or small piece of sand paper before applying thermal grease to the top of the copper plate and securing to the pipe. Be sure not to over tighten before insulating the transmitter from the effects of the ambient air. For best results the sensor should be mounted on the top or sides of the pipe such that moisture and condensation will not cause the transmitter to fail prematurely. All transmitters must be ordered with the temperature span that you require, since the boards are tuned to give you the best performance characteristics for the temperature span specified. Zero and Span adjustments are available for recalibration in the field when using NIST Certified equipment. ACI recommends the use of an 18 to 22 AWG shielded cable for all temperature transmitter installations to protect against the introduction of noise onto the signal lines.
Price: 80 USD
Location: Ashville, Ohio
End Time: 2024-11-25T22:16:58.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: ACI
Type: Air Temperature Sensor
Power Source: Corded Electric
Color: Gray
Model: A/TT1K-S-4-4X
MPN: SNR-007
Unit Quantity: 1
Country/Region of Manufacture: United States
