9x13cm Car Engine Oil Pan Heater Pad Tank Heater Silicone Heating Pad Orange New

Description: Features 1. Safe to use, fast heating, high thermal efficiency and even heating. 2. It can be used as auxiliary heating for refrigeration and air-conditioning compressors, motors and other equipment. 3. The silicone rubber heater is waterproof, oil-resistant and acid-resistant. 4. Built-in highest quality thermal overload protection switch for power saving. 5. Easy to use, safe and long service life, not easy to age. Package Included 1 x Heating pad(US plug) Product Description: This product is mainly composed of alloy heating wire and silicone rubber high-temperature insulating cloth. It heats up quickly, is heated evenly, has high thermal efficiency, and has good toughness. It meets the resistance standard of UL 94-V0 in the United States. And easy to use, waterproof, long life. The product can reach a constant temperature within ten minutes. Features 1. Safe to use, fast heating, high thermal efficiency and even heating. 2. It can be used as auxiliary heating for refrigeration and air-conditioning compressors, motors and other equipment. 3. The silicone rubber heater is waterproof, oil-resistant and acid-resistant. 4. Built-in highest quality thermal overload protection switch for power saving. 5. Easy to use, safe and long service life, not easy to age. Specification: * US Plug: 110V 120W * Material: alloy wire, silicone rubber* Color: orange* Maximum temperature of insulating material: 220 degrees* Power error: 8%* Insulation resistance: ≥5 MΩ* Compressive strength: 1500v/5s* Resistor voltage: 6KV* Heater size: 9x13 cm/3.54"x5.12"* Line length: 200cm* Scope of application: various automobile fuel tanks, water tanks, batteries, antifreeze and heat insulation. ⭐⭐ Instructions: - Use pressure sensitive adhesive on flat and smooth workpieces - The maximum operating temperature of the pressure-sensitive adhesive: 150°C continuous temperature, 220°C instantaneous temperature. Power density less than 0.9 W/c ㎡ - When using the electric heating device, it must be noted that its working temperature should be lower than 220 °C, and the instantaneous continuous use should not exceed 220 °C. - When the working temperature is lower than 220℃, the current density can reach 3 w/c ㎡ - Paste installation conditions, allowable operating temperature is less than 150 ℃ - The selection of working voltage is based on the principle of high power and high voltage and low power and low voltage, with exceptions for special needs. - The silicone rubber heater with pressure-sensitive adhesive should be used within half a year after processing, otherwise it will affect the performance of the glue Package Included 1 x Heating pad(US plug) Notes:Please allow 1-3cm error due to manual measurement.Due to factors such as shooting angle and light, there may be chromatic aberration in color.

Price: 9.8 USD

Location: Humble, Texas

End Time: 2024-12-20T13:18:30.000Z

Shipping Cost: 0 USD