9mm Muzzle Brake 1/2x28 Ano, clamp, for Glock 17 width slides faux KKM OD GREEN

Description: YOU NEED A THREADED BARREL WITH 1/2"-28 THREADS TO USE THIS ITEMThis is a high quality, aluminum muzzle brake compensator. It is made in the USA (Minnesota actually). Features include: 9mm and .380 caliberNew feature, side slit clap, and two #6 screws hold the brake on the barrelEasy install!! Easy removal for cleaning!!threaded for 1/2x28 tpi right handed threads (most common 9mm threads in the USA)COUNTERBORED: this feature on the slide facing side lets the brake get closer to the slide to make the gap smaller! (see picture of the side view)width is sized to match the Glock 17, 19, 26, and 34 (1.00" wide - measure yours to see if it will match)flush with the top of the glock slidedistance (or gap) from the front of the slide depends on your particular barrel but is reduced by up to 3/16" because of the Counterbore.add roughly 0.89" to the length of the barrel (however far out yours sticks)Made of 6061 AluminumClear/Gray Type III Hard Coat AnodizeSpray Painted Brownells Aluma Hyde 2 OD GREEN (over Anodize)retained with two #6-32 x 3/8" SHCS, included.tighten set screws to 10-12 inch pounds This reduces felt recoil for competition, or duty. Works better with higher grain/higher power loads (they have more gas to push back against the brake with). In some cases, very light gamer loads will not cycle the action unless springs are changed out. Set screws are tightened with a 7/64" allen L-wrench (included). When tightened down the tops of the allen screws are below flush with the side of the compensator. On screws this small about 10 inch pounds is all the tighter you want to get them. NOTE: Customer feedback says these fit and work on 1/2"-28 threaded barrels on FN 509 Tac, and HK VP9 and will match their slides. You can loctite the set screws and the comp on if you want with temporary loctite (not included). See my store for individual tubes if you need it! Please read the following notes before completing your order: 1. Please check your shipping address carefully before checkout, if it is wrong contact me, I'll fix it. 2. If I receive a package for RETURN TO SENDER or because of incorrect address, the refund will be processed excluding our shipping cost. Shipping 1. Warehouse Location: Minneapolis, MN 2. Free shipping by USPS Ground service 3. Estimated delivery: 3-5 business days after shipping. Feedback 1. I leave POSITIVE FEEDBACK after receiving the payment. Please contact me if you are not satisfied with the item after receiving it. 2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. Please contact me and I will work hard to fix the issue for you. 3. We work hard to make sure EVERY CUSTOMER is 100% SATISFIED and resolve any problem for you have and always leave positive feedback to all our customers. I am not satisfied until you are.

Price: 45 USD

Location: Saint Paul, Minnesota

End Time: 2024-10-05T13:53:31.000Z

Shipping Cost: 0 USD