Description: Light your little 1:144 or 1:48 dollhouses with 6 tiny pico LED bulbs already assembled for you with a 3V battery holder, 1 CR2032 battery included, on/off switch, and a quick disconnect to make it easier to route the wiring. The entire assembly is approximately 15" long. The bulbs are warm white and have a soft yellow-ish glow. This set is great for a 6 room dollhouse! Leanna Bond sent photos of her 1:144 scale house that has 5 lights in cool white and how the battery and switch is hidden. She put the bulb behind the lamp giving the illusion that the light is in the lamp. Clever! Pico bulbs are 1mm wide and .5mm high (.04" x .02" approximately) and have a bright side and are less bright on the back side. The quick disconnect is approximately 1/8" x 1/16" to allow for a small drill hole if installing in an assembled dollhouse or in a completed model. The connector works well if you make your light into a lamp and need a 1/8" hole to install the lamp in your room. The bulbs are so small that a tiny hole is all that is needed if you only need to put the light through a wall or ceiling. I can send one CR2032 battery with the set as long as it's installed in the battery holder. The set is shipped in a plastic box so the switch can't be turned on accidentally. Outside the US - I cannot send a battery with the set due to the new post office rules. Please be aware that any dates given by the post office or eBay are estimates for delivery times only and may vary. We can offer no guarantee on delivery times after it's mailed. Please email if you have any questions. Postage outside the US is $20.
Price: 24.99 USD
Location: Dallas, Texas
End Time: 2024-01-14T19:41:48.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Country/Region of Manufacture: United States
Type: Doll Houses
Features: Artist Made
