4 X 8 FT - CNC PLASMA TABLE WITH HYPERTHERM POWERMAX 85 AND TORCH CONTROLLER

Description: USED - 4 X 8 FT CNC PLASMA TABLE WITH HYPERTHERM POWERMAX 85 AND BLADE RUNNER TORCH CONTROLLER, INCLUDE PC AND MONITOR. NO WARRANTY TABLE DIMENSIONS: 4 FT X 8 FTTABLE MATERIAL: POWDER COATED STEEL PLASMA CUTTER: POWERMAX85 PLASMA CUTTER Input voltagesCSA200 – 480 V, 1-PH, 50/60 Hz200 – 600 V, 3-PH, 50/60 HzCE380/400 V, 3-PH, 50/60 HzInput Current @12.2 kWCSA200/208/240/480 V, 1-PH, 70/68/58/29 A200/208/240/480/600 V, 3-PH, 42/40/35/18/17 ACE380/400 V, 3-PH, 20.5/19.5 AOutput current25 - 85 ARated output voltage143 VDCDuty cycle @ 40°C (104°F)CSA60% @ 85 A, 230 – 600 V, 3-PH60% @ 85 A, 480 V, 1-PH50% @ 85 A, 240 V, 1-PH50% @ 85 A, 200 – 208 V, 3-PH40% @ 85 A, 200 – 208 V, 1-PH100% @ 66 A, 230 – 600 V, 1/3-PHCE60% @ 85 A, 380/400 V, 3-PH100% @ 66 A, 380/400 V, 3-PHOpen circuit voltage (OCV)CSA305 VDCCE270 VDCDimensions with handles500 mm (19.7") D; 234 mm (9.2") W; 455 mm (17.9") HWeight with 7.6 m ( 25') torchCSA32 kg (71 lbs)CE28 kg (62 lbs)Gas SupplyClean, dry, oil-free air or nitrogenRecommended gas inletflow rate / pressureCutting: 189 l/min (400 scfh, 6.7 scfm) @ 5.9 bar (85 psi)Gouging: 212 l/min (450 scfh, 7.5 scfm) @ 4.8 bar (70 psi)Input power cable length3 m (10')Power supply typeInverter - IGBTEngine-driven generator operationEngine drive ratingSystem output currentPerformance (arc stretch)20 kW85 AFull15 kW70 ALimited15 kW60 AFull12 kW60 ALimited12 kW40 AFull8 kW40 ALimited8 kW30 AFullCut capacityCapacityThicknessCut speed CuttingRecommended25 mm (1")500 mm/min (20 ipm) 32 mm (1-1/4")250 mm/min (10 ipm)Severance (hand cutting)38 mm (1-1/2")125 mm/min (5 ipm)Pierce *20 mm (3/4") * Pierce rating for handheld use or with automatic torch height control CapacityMetal removal rateGroove profile GougingTypical gouge8,8 kg/hr(19.5 lbs/hr)5,8 mm D x 7,1 mm W(0.23" D x 0.28" W)Production cut chartMaterialThicknessCurrentProduction cut speed *inchesmmampsipmmm/minMild steel1/468516044001/212855616003/4208529680Stainless steel1/468516446001/212854814003/4208524570Aluminum1/468517249001/212856819303/4208537880*Production cut speeds are the result of Hypertherm's laboratory testing.Production speeds are approximately 80% of maximum. For optimum cut quality, cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details. CONTROLLER: CANDCNC BLADE RUNNER ESP II-A & SENSOR PWM IIABLADERUNNER SERIES. FEATURES “SMART ” POWER,HIGH SPEED DIGITAL TORCH HEIGHT, MOTORS, AND CABLESINCLUDES:ESPIII 600W Smart Power with fault detection and auto shutdownUltra High Speed DTHC 5 Torch Height Control with Isolated Remote Sensor ModuleNew expanded I/O EBOB Direct Ethernet.Four High Torque Stepper Motors pre wired with new round locking cables and connectors.Quality US made (Gecko) Microstepping Motor Drivers mounted on new Dual Driver modulesPre-loaded LINUX Computer and CommandCNC, drawing and CAD programs Fully Licensed Control and CAM (SheetCAM) NOTHING ELSE TO BUY!

Price: 16500 USD

Location: Houston, Texas

End Time: 2023-12-20T17:21:26.000Z

Shipping Cost: N/A USD