Description: VIDEO SHOWS LED EFFECTS USING LED CONTROLLER (NOT INCLUDED!)(controller available on eBay here: https://www.ebay.com/itm/361162873382)Includes red/white/blue Camaro Logo plastic inlay between the cup sleeves, backlit with an LED STRIP! Includes quick disconnect pigtail plug. Buyer is responsible for connecting to a fused 12v power source (recommend stereo connect harness, yellow wire).ALL ASH-TRAY STYLE CUP HOLDER INSTALLATIONS (regardless of the material OR the seller) REQUIRES CUTTING YOUR CAR'S CENTER CONSOLE!Fitment is "flush" with the surface of the rest of the console.THIS ITEM REQUIRES CAREFUL CUTTING and removal of the existing ashtray section of center console shifter plate. Also required is the trimming of the hidden plastic inner flange of the console by about a quarter inch to make room for the two cup sleeves. Recommended cutting tool is a Dremel rotary tool with a cut-off wheel at low speed. Instructions for cutting are included.For center consoles with automatic transmissions ONLY. THIS DOES NOT FIT MANUAL TRANSMISSION CONSOLES. NOTE: The left side cup holder is slightly shorter than the right to provide clearance for the automatic transmission linkage on the left. NOTE: FOR 82-84 Camaros these cup holders provide space for the original automatic transmission rigid curved shifter dust cover strip (instead of the later model 'rolltop' dust strip). There is enough gap for the cover strip to pass between the cup sleeves when the shifter is in 'Park'. However, part of the forward strip "guide" may also need trimming. AUTOMATIC transmission center consoles only!Inside dia is 2.72 inches, flat bottomed. Holds standard cans, small coffee cups and small water bottles. This will hold the NEW 16.9oz plastic pop bottles. It will NOT hold standard 20oz plastic pop bottles.Replaces existing ash tray section of shifter plate'factory appearance' design, top surface texture similar to center consoledurable ABS plasticcolor is satin flat blackpowered USB port option available (see other listings)This is an original design. It is a flush fit same as the ash tray (see pictures). Re-use the four existing factory installed 3/4 inch long torx head bolts, from the ash tray console, to fasten/secure the bracket.Assembled from 3D printed and INJECTION MOLDED parts.THIS WILL FIT ThirdGen Chevrolet Camaro MODEL YEARS: 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992. These will NOT FIT any other year/model GM F-body or other car.
Price: 59.95 USD
Location: Anacortes, Washington
End Time: 2024-12-03T16:24:30.000Z
Shipping Cost: 5.35 USD
Product Images
Item Specifics
Returns Accepted: ReturnsNotAccepted
Non-Domestic Product: No
Number of Pieces: 1
Fitment Type: Performance/Custom
Color: Black
Manufacturer Part Number: 3rdgencenterlogo
Material: Plastic
Vintage Part: Yes
Placement on Vehicle: Center
Number of Cup Holders: 2
Brand: schipsoft
Manufacturer Warranty: No Warranty
Attachment Type: Screws
Features: Leak Proof, Removable
Surface Finish: textured
Country/Region of Manufacture: United States
Universal Fitment: No
Performance Part: Yes
