Description: 3.52inch e-Paper HAT, 360 × 240, SPI Interface3.52″ e-Paper HATlow power, wide viewing angle, paper-like effect without electricityIdeal for price tags, shelf labels, industrial instruments... Size3.52″Resolution360×240Viewing Angle>170°Display ColorBlack/WhiteGrey Scale2CommunicationSPIDisplay PanelE-paperExperiencePaper-likeEnvironmentAmbient Light RequiredDisplay TypePassively ReflectiveFeatures at a glanceNo backlight, keeps displaying last content for a long time even when power downUltra low power consumption, basically power is only required for refreshingStandard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson NanoSPI interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.Onboard voltage translator, compatible with 3.3V/5V MCUsComes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)Specificationsoperating voltage3.3V/5Vdisplay colorBlack/Whiteinterface3-wire SPI, 4-wire SPIgrey scale2outline dimensions86.5 × 57mmfull refresh time1.5sdisplay size74.51 × 49.67mmrefresh power<25mW (typ.)DOT PITCH0.207 × 0.207mmstandby current<0.01uA (almost none)RESOLUTION360×240 pixelsviewing angle>170°Advantages of EINKE-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.Standard Raspberry Pi 40PIN GPIO HeaderSimilar to the size of Raspberry Pi, Compatible With the size of Raspberry Pi 4B / 3B / 3B+Onboard SPI Control InterfaceFor Use With Controller Boards Like Raspberry Pi/STM32/ArduinoVCCPower (3.3V / 5V input)GNDGroundDINSPI MOSI pinCLKSPI SCK pinCSSPI chip selection, low activeDCData/Command selection (high for data, low for command)RSTExternal reset, low activeBUSYBusy status output pinOnboard Voltage TranslatorCompatible With 3.3V / 5V MCUsOutline dimensions Development ResourcesWiki : https://www.waveshare.com/wiki/3.52inch_e-Paper_HATPackage contains3.52inch e-Paper HAT x1PH2.0 20cm 8Pin x1Screws pack x1123
Price: 25.64 USD
Location: 深圳
End Time: 2024-12-08T09:22:03.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Waveshare
Type: E-Ink
