3-Way Carbon Fiber In-Wall Column Speaker

Description: 3-Way Carbon Fiber In-Wall Column Speaker - 6.5 Inch (Each) with Ribbon Tweeter,. Condition is New. Shipped with USPS Priority Mail. In‑wall speakers are the ideal combination of sound quality and styling. Rather than cluttering the room with large box speakers trailing speaker wires, the speakers are virtually invisible, while filling the room with high fidelity audio. Featuring a removable and paintable grille, this 3‑way speaker uses a carbon fiber woofer cone with rubber surround for deep, impactful bass, a carbon fiber mid‑range driver for tight, articulate mids, and a ribbon tweeter for sweeter and smoother high frequencies. Ribbon TweeterCarbon Fiber DriversHigh Frequency AttenuatorMagnetic Grille Ribbon Tweeter: A ribbon tweeter is composed of a very thin metal diaphragm suspended in a powerful magnetic field. It is capable of very high acceleration, which means that it is very responsive to musical nuances. Ribbon tweeters have a wide horizontal dispersion and a very tight vertical dispersion, thereby increasing the size of the audio "sweet spot".Carbon Fiber Drivers: Carbon fiber is a very lightweight and rigid material, making it ideal for speaker drivers. The lightweight ensures that the driver can respond quickly to musical nuances, while the additional rigidity results in improved accuracy and a flatter frequency response. The result is a is deep, impactful bass, and tight, articulate mids, without a hint of distortion.High Frequency Attenuator: The high‑frequency attenuator can reduce high frequencies by 0, ‑3, or ‑6 dB. This allows you to fine tune the speaker's high‑end response to compensate for a particularly "bright" listening environment.Magnetic Grille: The removable grille attaches to the speaker using powerful magnets, to ensure that the powerful bass does not cause rattle. The grille is paintable and features a slim bezel, allowing it to more easily blend into your home's decor.Higher sensitivity, deeper bass,and higher power handlingCarbon fiber is a lighter and stiffer material than what is normally used in speaker drivers. This means that the drivers can respond quickly to musical nuances, are more accurate, and have a flatter frequency response. The result is deep, impactful bass and tight, articulate mids, without a hint of distortion. 4.5" x 3" ribbon tweeter100 watts RMS, 200 watts maximum power handling capacity6.5" carbon fiber bass and mid‑range drivers56 Hz to 20 kHz frequency response8 ohms nominal impedanceRemovable and paintable grille89dB sensitivityMagnetic grille Tools Recommended for Installation Stud finderCarpenter's levelMarking pen or pencilDrywall cutter14AWG CL2 in‑wall rated speaker wire (P/N 3845)Wire strippersPhillips screwdriver Model 15700 Model15700Type3‑way in‑wallWoofer6.5" carbon fiber wooferMid‑Range6.5" carbon fiber wooferTweeter4.5" x 3.1" (115 x 80 mm) ribbon tweeterFrequency Response56Hz ~ 20kHz, ‑3dBCrossover Frequencies650Hz and 4kHzNominal Impedance8 ohmsPower Handling Capacity (RMS)100 wattsPower Handling (Max)200 wattsSensitivity89dBFs59.912 HzRe7.2 ohmsQts0.378Vas8.388 litersCms335.311 µm/NBL10.505 TEBP144.39Xmax4.1mmSD13.273 cm2Overall Dimensions8.2" x 19.2" x 3.6" (207 x 487 x 91 mm)Cutout Dimensions6.69" x 17.72" (170 x 450 mm)Weight8.5 lbs. (3.85 kg)

Price: 88 USD

Location: Beverly Hills, California

End Time: 2024-11-16T05:44:23.000Z

Shipping Cost: 0 USD